Specifications

SLC 500 Programmable Controllers and I/O Modules

SLC 5/05 Processors (Catalog No. 1747-L551, -L552, or -L553)

The SLC 5/05 processor provides identical control functionality as the SLC 5/04 processor using standard

Ethernet communications instead of DH+. Ethernet communication takes place at 10 Mbps, providing you with

a high-performance network for program upload/download, on-line editing, peer-to-peer messaging, data

acquisition, and operator interface (e.g. RSView32). The variety of memory sizes allows you to closely match

your application needs. The SLC 5/05 provides:

• Program memory sizes of 16K, 32K, or 64K

• High-speed performance - 0.90 ms/K typical

• Control of up to 4096 input and output points

• Online programming (includes runtime editing)

• Built-in 10Base-T Ethernet channel, supporting:

— High-speed computer communication using TCP/IP

— Messaging capabilities with SLC 5/05, PLC-5, and PLC-5/250 processors,

1785-ENET Ethernet interface module, and 1756-ENET Ethernet bridge, and

other commercially available computer Ethernet modules

— SNMP for standard Ethernet network management

— BOOTP for optional dynamic IP address assignment

• Built-in RS-232 channel supporting DF1 Full-duplex, DF1 Half-Duplex Master/Slave for SCADA,

DH-485 using a 1761-NET-AIC with a 1747-CP3 cable, and ASCII

• Ethernet to DH-485, channel-to-channel passthrough

• Ethernet to DF1, channel-to-channel passthrough

• Remote I/O passthrough from channel 0 (DF1 or DH485) or channel 1 (Ethernet) using a 1747-SN

or 1747-BSN remote I/O scanner module

• DeviceNet passthrough using 1747-SDN DeviceNet scanner module

• Built-in real-time clock/calendar

• 1 ms Selectable Timed Interrupt (STI)

• 0.50 ms Discrete Input Interrupt (DII)

• Advanced math features — trigonometric, PID, exponential, floating point, and the compute instruction

• Indirect addressing

• Flash PROM provides firmware upgrades without physically changing EPROMS

• Optional flash EPROM memory module available

• Key switch - RUN, REMote, PROGram (clear faults)

• Battery-backed RAM