Specifications

SLC 500 Programmable Controllers and I/O Modules

Discrete

I/O Modules

Our wide variety of input, output, and

combination modules makes the SLC

500™ family the smart choice for all

of your small PLC applications.

I/O modules are available in a wide

variety of densities including 4-, 8-, 16-,

and 32-point and can interface to AC,

DC, and TTL voltage levels. Output

modules are available with solid-state

AC, solid-state DC, and relay contact

type outputs. For added flexibility,

combination modules are also

available in 2-input/2-output, 4-input/

4-output, and 6-input/6-output versions.

Designed and tested for industrial

applications, our modules are of the

highest quality. The modules feature

input filtering, optical isolation, and

built-in surge protection to enhance

the reliability of operation in noisy

industrial environments.

Features

Select I/O modules to exactly match your application with combination

modules that allow you to have inputs and outputs in a single slot for efficient

use of your chassis space.

High-density 32-point DC I/O and fast response DC inputs are available, allowing

the SLC 500 to be applied in a broader spectrum of control applications

LEDs indicate the status of each I/O point, assisting you in troubleshooting.

The LEDs illuminate when the proper signal is received at an input terminal,

or when the processor applies power to an output terminal.

Terminal identification diagrams located on each module making terminal

identification easier.

All modules feature optical isolation between digital and field circuits, resulting

in increased noise immunity and limited damage to your system due to an

electrical malfunction of the field wiring.

Solid-state output modules available with fusing and electronic protection,

eliminating the need to replace modules damaged by short circuits and overloads.

Removable terminal blocks allow you to replace the module without rewiring

it (not available on all modules). A matching color band is also provided on the

front of the module to assist in matching the terminal block to the module.

Barrier-type terminal blocks provided on all modules to help prevent

accidental shorting of field wiring.

Self-locking tabs secure the modules in the chassis, and no tools are

necessary to either install or remove the modules to/from the chassis..