Owner`s manual

Residential Steambath Generator Systems
2
Select your Model
1. Measure the Length, Width, & Height (in ft.) of steam shower
or tub/shower being used. Multiply the Length x Width x Height
to get the B asic R oom Volume in CUB IC FE E T
L _______ x W _______ x H _______ = a
2. Add to the room volume (a) for each of the following design features
that describe the steambath enclosure:
For natural stones: natural marble,stone
shale, glass block or concrete
Add 100%
Add 30%
Add 30%
Add 15% per foot
h
For ceramic or porcelain tile on cement board or mortar bed
For each exterior wall or extra glass panel
For each foot exceeding 8ft. in height
3.
Add all gures above to obtain the Total Room Volume required
Selection Chart
Maximum R oom
Model No. KW Vol. ft
3
(cu.meters)
Compare the Total Cubic Feet required (h) to the Specication Chart below and select the appropriate model.
Note: To convert cubic feet ot cubic meters, divide cubic feet by 35.3.
Example: Total cubic feet required is 155. Divide by 35.3 to obtain 4.39 m3. Select model ABSC02787
IMPORTANT: The guideline for
selecting the steambath generator is a
recommendation only. Because of vari-
ables in construction, these sizing
instructions and specications should be
considered as guidelines only.
Aquasteam will review the model
selected provided we receive complete
information, including working drawings,
specications, and pertinent electrical
and construction details. Otherwise the
manufacturer disclaims responsibility for
the sizing of a mod
el selected.
aquasteam
ABSC02787 7.5 151-225 (4.27-6.37)
ABSC02789 9 226-360 (6.39-10.19)
ABSC02782 12 476-575 (13.4-16.28)
aquabrass.com