Owner`s manual

Residential Steambath Generator Systems
7
!
caution
Electrical Specifications
All electrical wiring to be installed by a qualied licensed electrician in accordance with National
ElectrIcal Code and local electrical code.
Power Wiring See “ Field Power Wiring” Diagrams (Page 8)
1. Check power voltage. Use 240V/ 1ph to connect SH residential steambath generator.
2. Use minimum 90ºC /600V rated insulated copper conductors only for eld wiring, sized in accordance
with National E lectrical Code and local electrical code for the Amps in Ampere Chart.
3. Connect suitably sized equipment grounding wire to ground terminal provided.
4. Install a separate circuit breaker between supply and unit. Provide a power supply disconnect
within sight of the steam generator or one that is capable of being locked in the open position.
______________________________________________________________
Ampere Chart
______________________________________________________________
Maximum Room Voltage/ Wire Size
Model No. Volume ft
3
(m
2
) KW phase Amperes AWG (mm
2)
_______________________________________________________________________________________
ABSC02787 225(6.37) 7.5 240/1 32 8 (10 )
_______________________________________________________________________
ABSC02789 360 (10.19) 9.0 240/1 38 8 (10 )
__________________________________________________________________________
_________________________________________________________________________
Wiring Diagrams
Diagram
for ABSC02787
ABSC02789
Diagram
for ABSC02782
TO PROBE
HEATING
ELEMENT
CONTROL BOARD
GROUND
CONTACTOR
LIGHT
BLUE
WHITE
PURPLE
GREEN
C
S
WHITE
GRAY
BLACK
BLACK
L2
L1
WHITE
DARK
BLUE
TRANSFORMER
WATER
FEED
SOLENOID
VALVE
FUSES
PURPLE
POWERINPUT
Automatic Drain
(optional)
FACTOR
Y
WIRING
FIELD
WIRING
LEGEND
(All Diagrams)
WATER
FEED
SOLENOID
VAVLE
HEATING
ELEMENT
CONTROL BOARD
GROUND
CONTACTOR
LIGHT
BLUE
WHITE
PURPLE
GREEN
C
S
WHITE
GRAY
POWER INPUT
BLACK
BLACK
L2
L1
WHITE
DARK
BLUE
TRANSFORMER
AUTOMATIC DRAIN
(optional)
TO PROBE
G
FACTORY
WIRING
FIELD
WIRING
LEGEND
( All Diagrams)
aquasteam
TO AVOID EQUIPMENT DAMAGE DO NOT
CONNECT POWER SUPPLY DIRECTLY TO
HEATING ELEMENTS !!!
aquabrass.com
ABSC02782 575 (16.82) 12 240/1 50 6 (16)