User manual

Forgotten PIN code.
Reinstall firmware of your
receiver by „all_noboot“
installation file.
No EPG data
Local time is not set correctly Press Time update in Local
time setting menu
“ERR 80” or “ERR 81” message
appears on front panel of your receiver.
Wrong communication
between CPU and
motherboard.
Contact authorized service.
“ERR 82” or “ERR 83” message
appears on front panel of your receiver
Wrong contact of tuner in
mini PCI slot of motherboard.
Unplug the receiver from
power supply and check the
contact or contact authorized
service.
“PANIC” or „System halt“ message
appears on front panel of your receiver
Program error. Simultaneously press and
hold Standby + OK buttons on
front panel of your receiver to
turn it off and then turn it on. If
problem resists try to reinstall
firmware of receiver.
Err 79
Incompatible database. Download compatible
database "db.img" or whole
image "all_noboot.img"
Err 1
CRC error , damaged image
file
Check the file or try to install
again.
Err 2
CRC error , damaged image
file
Check the file or try to install
again.
Err 3
Wrong ID of manufacturer Check downloaded file or try
to install it again.
Err 4
Wrong ID of manufacturer Check downloaded file or try
to install it again.
Err 5
Incorrect model of receiver Check if the software
corresponds to your model.
Err 6
Incorrect model of receiver Check if the software
corresponds to your model.
Err 8
Erasing error Contact authorized service
Err 9
Flash writing error Contact authorized service
Err 10
Incorrect or missing
installation file
Check downloaded file or
repeat the procedure with
USB flash again – keep the
procedure step by step
according to instruction !
“ERR 84”
DVBS-2 microcode loading
failed
Contact authorized service