2012 FIAT 500 2012 OWNER’S MANUAL Chrysler Group LLC 12FF500-126-AD Fourth Edition FIAT 500 Printed in U.S.A. 960618cv1.psp 12FF500-126-AD Chrysler 1" gutter 03/28/2011 17:46:33 2012 FIAT 500 2012 OWNER’S MANUAL Chrysler Group LLC 12FF500-126-AD Fourth Edition Printed in U.S.A.
VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name Chrysler Group LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefore. DRIVING AND ALCOHOL Drunken driving is one of the most frequent causes of accidents. Your driving ability can be seriously impaired with blood alcohol levels far below the legal minimum. If you are drinking, don’t drive. Ride with a designated non-drinking driver, call a cab, a friend, or use public transportation.
SECTION TABLE OF CONTENTS PAGE 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1 2 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 2 3 UNDERSTANDING THE FEATURES OF YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 3 4 UNDERSTANDING YOUR INSTRUMENT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION 1 CONTENTS 䡵 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 䡵 Vehicle Identification Number .............. 6 䡵 How To Use This Manual . . . . . . . . . . . . . . . . . . 4 䡵 Vehicle Modifications/Alterations . . . . . . . . . . . . 7 䡵 Warnings And Cautions . . . . . . . . . . . . . . . . . . .
4 INTRODUCTION INTRODUCTION Congratulations on selecting your new vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. NOTE: After reviewing the owner information, it should be stored in the vehicle for convenient referencing and remain with the vehicle when sold.
INTRODUCTION 5 1
6 INTRODUCTION WARNINGS AND CAUTIONS This Owner’s Manual contains WARNINGS against operating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important information. Observe all Warnings and Cautions.
INTRODUCTION 7 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death. Stamped VIN Location NOTE: It is illegal to remove or alter the VIN.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2 CONTENTS 䡵 A Word About Your Keys . . . . . . . . . . . . . . . . . 11 ▫ To Lock The Doors And Liftgate . . . . . . . . . . 16 ▫ Ignition Key Removal . . . . . . . . . . . . . . . . . . 12 ▫ Programming Additional Transmitters . . . . . . 17 ▫ Locking Doors With A Key . . . . . . . . . . . . . . 13 ▫ General Information . . . . . . . . . . . . . . . . . . . 17 ▫ Key-In-Ignition Reminder . . . . . . . . . . . . . . . 14 ▫ Transmitter Battery Replacement .
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 䡵 Occupant Restraints . . . . . . . . . . . . . . . . . . . . . 25 ▫ Advanced Front Air Bag Features . . . . . . . . . . 41 ▫ Lap/Shoulder Belts . . . . . . . . . . . . . . . . . . . . 29 ▫ Air Bag Deployment Sensors And Controls . . . 44 ▫ Lap/Shoulder Belt Untwisting Procedure . . . . 34 ▫ Event Data Recorder (EDR) . . . . . . . . . . . . . . 54 ▫ Seat Belts In Passenger Seating Positions . . . . . 34 ▫ Child Restraints . . . . . . . . . . . . . . . .
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 A WORD ABOUT YOUR KEYS The key fob contains the Remote Keyless Entry (RKE) transmitter with an integrated key. To use the mechanical key simply press the mechanical key release button. Mechanical Key Release Button The vehicle is supplied with a code card containing key code numbers to order duplicate keys, and the authorized dealer that sold you your new vehicle has the key code numbers for your vehicle locks.
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Ignition Key Removal 1. Place the shift lever in PARK (if equipped with an automatic transmission). 2. Turn the ignition switch to the ACC/ON/RUN position. 3. Rotate the key to the OFF/LOCK position. 4. Remove the key from the ignition switch lock cylinder.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 WARNING! WARNING! (Continued) • Before exiting a vehicle, always apply the parking brake, shift the transmission into PARK, and remove the key fob from the ignition. When leaving the vehicle, always lock your vehicle. • Never leave children alone in a vehicle, or with access to an unlocked vehicle. • Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured.
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the Vehicle Security Light is on after the key is turned Key-In-Ignition Reminder Opening the driver’s door when the key is in the ignition to the ON/RUN position, it indicates that there is a and the ignition switch position is OFF/LOCK, sounds a problem with the electronics. signal to remove the key. SENTRY KEY姞 The Sentry Key威 Immobilizer System prevents unauthorized vehicle operation by disabling the engine.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 Replacement Keys General Information The Sentry Key威 system complies with FCC rules part 15 NOTE: Only keys that have been programmed to the and with RSS-210 of Industry Canada. Operation is vehicle electronics can be used to start the vehicle. Once subject to the following conditions: a Sentry Key威 has been programmed to a vehicle, it • This device may not cause harmful interference. cannot be programmed to any other vehicle.
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE using a hand-held Remote Keyless Entry (RKE) transmit- To Unlock The Doors And Liftgate ter. The RKE transmitter does not need to be pointed at Press and release the UNLOCK button on the RKE transmitter once to unlock the driver’s door or twice, the vehicle to activate the system. within five seconds, to unlock all doors and the liftgate. The turn signal lights will flash to acknowledge the unlock signal. The illuminated entry system will also turn on.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 Programming Additional Transmitters Refer to Sentry Key威 “Customer Key Programming.” NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. If you do not have a programmed RKE transmitter, If your RKE transmitter fails to operate from a normal contact your authorized dealer for details.
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Transmitter Battery Replacement NOTE: Perchlorate Material – special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate The recommended replacement battery is CR2032. 1. Press the mechanical key release button and release the mechanical key to access the battery case screw located on the side of the Key Fob.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 2. Rotate the screw located on the side of the Key Fob using a small screwdriver. 2 Battery Case Removed Key Fob Screw Location 3. Take out the battery case. Remove and replace the battery observing its polarity. 4. Refit the battery case inside the Key Fob and turn the screw to lock it into place.
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE DOOR LOCKS The door locks can be manually locked or unlocked from inside the vehicle by using the door handle. If the door handle is pushed a red lock indicator will show on the door handle (indicating locked) when the door is closed, the door will lock. WARNING! • Do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 WARNING! (Continued) • Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal or the shift lever. • Do not leave the key fob in or near the vehicle, and do not leave the ignition in the ACC or ON/RUN position. A child could operate power windows, other controls, or move the vehicle.
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: To prevent the key from being locked in the vehicle, the power door lock switch will not operate when the key is in the ignition and either front door is open. A chime will sound as a reminder to remove the key. Automatic Door Locks — If Equipped When enabled, the door locks will lock automatically when the vehicle’s speed exceeds 15 mph (24 km/h).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 WARNING! Never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unattended children, can become entrapped by the windows while operating the power window switches. Such entrapment may result in serious injury or death. 2 Power Window Switches Auto-Down — If Equipped The driver’s door window switch may have an AutoDown feature.
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE down automatically. To cancel the Auto-Down move- LIFTGATE ment, operate the switch in either the up or down To unlock the liftgate, use the Remote Keyless Entry (RKE) transmitter or activate the power door lock direction and release the switch. switches located on the front door handles.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 WARNING! • Driving with the liftgate open can allow poisonous exhaust gases into your vehicle. You and your passengers could be injured by these fumes. Keep the liftgate closed when you are operating the vehicle. • If you are required to drive with the liftgate open, make sure that all windows are closed, and the climate control blower switch is set at high speed. Do not use the recirculation mode.
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • All seat belt systems (except the driver’s) include Automatic Locking Retractors (ALRs), which lock the seat belt webbing into position by extending the belt all the way out and then adjusting the belt to the desired length to restrain a child seat or secure a large item in a seat — if equipped Please pay close attention to the information in this section.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 ride properly buckled up in the rear seat. Never allow 5. If the air bag system in this vehicle needs to be children to slide the shoulder belt behind them or under modified to accommodate a disabled person, contact their arm. the Customer Center. Phone numbers are provided in ⴖIf You Need Consumer Assistance.ⴖ You should read the instructions provided with your child restraint to make sure that you are using it properly. WARNING! 2.
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Being too close to the steering wheel or instrument panel during Advanced Front Air Bag deployment could cause serious injury, including death. Air Bags need room to inflate. Sit back, comfortably extending your arms to reach the steering wheel or instrument panel. • Side air bags also need room to inflate. Do not lean against the door or window. Sit upright in the center of the seat.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 ejection and the risk of injury caused by striking the inside of the vehicle. Everyone in a motor vehicle should be belted at all times. Lap/Shoulder Belts All the seating positions in your vehicle are equipped with combination lap/shoulder belts. The belt webbing retractor is designed to lock during very sudden stops or accidents. This feature allows the shoulder part of the belt to move freely with you under normal conditions.
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Wearing your belt in the wrong place could make your injuries in a collision much worse. You might suffer internal injuries, or you could even slide out of part of the belt. Follow these instructions to wear your seat belt safely and to keep your passengers safe, too. • Two people should never be belted into a single seat belt. People belted together can crash into one another in a collision, hurting one another badly.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” WARNING! • A belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you properly.
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • A belt that is worn under your arm is dangerous. Your body could strike the inside surfaces of the vehicle in a collision, increasing head and neck injury. A belt worn under the arm can cause internal injuries. Ribs aren’t as strong as shoulder bones. Wear the belt over your shoulder so that your strongest bones will take the force in a collision. • A shoulder belt placed behind you will not protect you from injury during a collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 WARNING! • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as possible and keep it snug. • A twisted belt may not protect you properly. In a collision, it could even cut into you. Be sure the belt is straight.
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE additional information, refer to “Installing Child ReLap/Shoulder Belt Untwisting Procedure Use the following procedure to untwist a twisted lap/ straints Using The Vehicle Seat Belt” under the “Child Restraints” section. The chart below defines the type of shoulder belt. feature for each seating position. 1. Position the latch plate as close as possible to the Driver Passenger anchor point. First Row N/A ALR 2.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 out only the amount of webbing necessary to comfort- How To Engage The Automatic Locking Mode ably wrap around the occupant’s mid-section. Slide the 1. Buckle the combination lap and shoulder belt. latch plate into the buckle until you hear a ⬙click.⬙ 2. Grasp the shoulder portion and pull downward until Automatic Locking Retractor Mode (ALR) — If the entire belt is extracted. Equipped In this mode, the shoulder belt is automatically pre- 3.
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • The belt and retractor assembly must be replaced if the seat belt assembly Automatic Locking Retractor (ALR) feature or any other seat belt function is not working properly when checked according to the procedures in the Service Manual. • Failure to replace the belt and retractor assembly could increase the risk of injury in collisions.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 Enhanced Seat Belt Use Reminder System (BeltAlert姞) BeltAlert威 is a feature intended to remind the driver and front passenger (if equipped with front passenger BeltAlert威) to fasten their seat belts. The feature is active whenever the ignition is on. If the driver or front seat passenger is unbelted, the Seat Belt Reminder Light will turn on and remain on until both front seat belts are fastened.
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Seat Belt Extender Seat Belts And Pregnant Women We recommend that pregnant women use the seat belts If a seat belt is too short, even when fully extended, and throughout their pregnancy. Keeping the mother safe is when the adjustable upper shoulder belt anchorage (if the best way to keep the baby safe. equipped) is in its lowest position, your authorized dealer can provide you with a seat belt extender.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 In addition, the vehicle is equipped with a Supplemental NOTE: These air bags are certified to the Federal Driver Side Knee Air Bag mounted in the instrument regulations for Advanced Air Bags. panel below the steering column. The Advanced Front Air Bags are designed to allow the air bags to have different inflation levels based on the severity and type of collision.
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE and rear passengers sitting next to a window. The SABIC • Air Bag Warning Light are located above the side windows. The trim covering • Steering Wheel and Column the SABIC is labeled SRS AIRBAG. • Instrument Panel This vehicle is equipped with Supplemental SeatMounted Side Air Bags (SAB). The SAB are marked with • Supplemental Driver Side Knee Air Bag an air bag label sewn into the outboard side of the front • Knee Impact Bolster seats.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 Advanced Front Air Bag Features The Advanced Front Air Bag system provides output appropriate to the severity and type of collision as determined by the Occupant Restraint Controller (ORC), which may receive information from the front impact sensors. WARNING! • No objects should be placed over or near the air bag on the instrument panel, because any such objects could cause harm if the vehicle is in a collision severe enough to cause the air bag to inflate.
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Supplemental Seat-Mounted Side Air Bags (SAB) Supplemental Seat-Mounted Side Air Bags (SAB) provide enhanced protection to help protect an occupant during a side impact. The SAB are marked with an air bag label sewn into the outboard side of the front seats. When the air bag deploys, it opens the seam between the front and side of the seat’s trim cover.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 The system includes side impact sensors that are calibrated to deploy the Seat-Mounted Side Air Bags (SAB) and SABIC during impacts that require air bag occupant protection. WARNING! Supplemental Side Air Bag Inflatable Curtains (SABIC) Label Location NOTE: Air Bag covers may not be obvious in the interior trim, but they will open during air bag deployment.
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Your vehicle is equipped with SABIC air bags, do not have any accessory items installed which will alter the roof, including adding a sunroof to your vehicle. Do not add roof racks that require permanent attachments (bolts or screws) for installation on the vehicle roof. Do not drill into the roof of the vehicle for any reason.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 Side Air Bags (SAB), and front seat belt pretensioners, as The side air bags will not deploy in all side collisions. required, depending on the severity and type of impact. Side air bag deployment will depend on the severity and type of collision.
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The ORC contains a backup power supply system that may deploy the air bags even if the battery loses power or it becomes disconnected prior to deployment. WARNING! Ignoring the Air Bag Warning Light in your instrument panel could mean you won’t have the air bags to protect you in a collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 are possible, based on the collision type and severity. The steering wheel hub trim cover and the upper right side of the instrument panel separate and fold out of the way as the air bags inflate to their full size. The air bags fully inflate in about 50 to 70 milliseconds. This is about half of the time it takes to blink your eyes. The air bags then quickly deflate while helping to restrain the driver and front passenger. Driver Side Knee Air Bag.
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE in about 10 milliseconds. The side air bag moves at a very high speed and with such a high force that it could injure you if you are not seated properly, or if items are positioned in the area where the side air bag inflates. This especially applies to children.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 event, the ORC will determine whether to have the After the event occurs, when the system is active, the Enhanced Accident Response System perform the follow- message ⬙Fuel Cutoff See Handbook⬙ is displayed. ing functions: Carefully check the vehicle for fuel leaks in the engine compartment and on the ground near the engine com• Cut off fuel to the engine.
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Customer Action 4. Turn Left Turn Signal Switch ON. 5. Turn Right Turn Signal Switch ON. 6. Turn Left Turn Signal Switch ON. 7. Turn Left Turn Signal Switch OFF. (Turn Signal Switch Must be placed in Neutral State). 8. Turn ignition OFF. 9. Turn Hazard Flashers OFF (Manually). Customer Will See Left Turn Light is ON SOLID. Right Turn Light BLINKS. Right Turn Light is ON SOLID. Left Turn Light BLINKS. Left Turn Light is ON SOLID. Right Turn Light is ON SOLID.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 If you do have a collision which deploys the air bags, any or all of the following may occur: throat irritation, move to fresh air. If the irritation continues, see your doctor. If these particles settle on your clothing, follow the garment manufacturer’s instructions for cleaning. • The nylon air bag material may sometimes cause abrasions and/or skin reddening to the driver and front passenger as the air bags deploy and unfold.
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Maintaining Your Air Bag System WARNING! (Continued) WARNING! • Modifications to any part of the air bag system could cause it to fail when you need it. You could be injured if the air bag system is not there to protect you. Do not modify the components or wiring, including adding any kind of badges or stickers to the steering wheel hub trim cover or the upper right side of the instrument panel.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 Air Bag Warning Light You will want to have the air bags ready to inflate for your protection in a collision. The Air Bag Warning Light monitors the internal circuits and interconnecting wiring associated with air bag system electrical components. While the air bag system is designed to be maintenance free, if any of the following occurs, have an authorized dealer service the air bag system immediately.
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Event Data Recorder (EDR) This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle’s systems performed. The EDR is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 Child Restraints Everyone in your vehicle needs to be buckled up at all times, including babies and children. Every state in the United States, and all Canadian provinces, require that small children ride in proper restraint systems. This is the law, and you can be prosecuted for ignoring it. Children 12 years or younger should ride properly buckled up in a rear seat, if available.
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The infant carrier is only used rearward-facing in the vehicle. It is recommended for children from birth until they reach the weight or height limit of the infant carrier. Convertible child seats can be used either rearwardfacing or forward-facing in the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 in the vehicle by the lap/shoulder belt or the LATCH child restraint anchorage system. Refer to “Lower Anchors and Tether for CHildren (LATCH)”. All children whose weight or height is above the forward-facing limit for the child seat should use a belt-positioning booster seat until the vehicle’s seat belts fit properly.
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Children Too Large For Booster Seats • Before buying any restraint system, make sure that it Children who are large enough to wear the shoulder belt has a label certifying that it meets all applicable Safety comfortably, and whose legs are long enough to bend Standards.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 LATCH — Child Seat Anchorage System (Lower Anchors and Tether for CHildren) Your vehicle is equipped with the child restraint anchorage system called LATCH, which stands for Lower Anchors and Tether for CHildren. The LATCH system provides for the installation of the child restraint without using the vehicle’s seat belts, instead securing the child restraint using lower anchorages and upper tether straps from the child restraint to the vehicle structure.
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! You should never install LATCH-compatible child seats so that two seats share a common anchorage. If installing seats in adjacent seating positions, or if your child restraints are not LATCH-compatible, install the restraints using the vehicle’s seat belts. Rear Seat LATCH Anchorages Installing The LATCH – Compatible Child Restraint System We urge you to carefully follow the directions of the manufacturer when installing your child restraint.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 The lower anchorages are round bars which are part of the seat and body structure. They are located at the rear of the seat cushion where it meets the seatback and just visible when you lean into the rear seat to install the child restraint. You will easily feel them if you run your finger along the intersection of the surfaces. The lower strap hooks are passed over the top of each bar, pushing aside the seat cover material.
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: • Ensure that the tether strap does not slip into the opening between the seatbacks as you remove the slack in the strap. • When using the LATCH attaching system to install a child restraint, please ensure that all seat belts not being used for occupant restraints are stowed and out of reach of children. It is recommended that before installing the child restraint, buckle the seat belt so the seat belt is tucked behind the child restraint.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 retractor. For additional information on ALR, refer to 2. Finally, pull on any excess webbing to tighten the lap “Automatic Locking Mode” description under “Occu- portion around the child restraint. Any seat belt system pant Restraints.” will loosen with time, so check the belt occasionally, and pull it tight if necessary. The chart below defines the seating positions with an Automatic Locking Retractor (ALR) or a cinching latch plate.
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Attach the tether strap hook of the child restraint to the tether anchor. Remove slack in the tether strap accord• Route the tether strap under the head restraint to ing to the child restraint manufacturer’s instructions. provide the most direct path for the strap between the anchor and the child seat. NOTE: Ensure that the tether strap does not slip into the opening between the seatbacks as you remove slack in the strap.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 The engine oil installed in the engine at the factory is a high-quality energy conserving type lubricant. Oil changes should be consistent with anticipated climate conditions under which vehicle operations will occur. For the recommended viscosity and quality grades, refer to “Maintenance Procedures” in “Maintaining Your VePets should be restrained in the rear seat in pet harnesses hicle”. or pet carriers that are secured by seat belts.
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE SAFETY TIPS WARNING! (Continued) Transporting Passengers NEVER TRANSPORT PASSENGERS IN THE CARGO AREA. WARNING! • Do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death. • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 WARNING! (Continued) • If you are required to drive with the trunk/liftgate open, make sure that all windows are closed and the climate control BLOWER switch is set at high speed. DO NOT use the recirculation mode. • If it is necessary to sit in a parked vehicle with the engine running, adjust your heating or cooling controls to force outside air into the vehicle. Set the blower at high speed. damaged, deteriorated, or mispositioned parts.
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE cannot slip out of position and interfere with the pedals Air Bag Warning Light The light should come on and remain on for four to eight or impair safe operation of your vehicle in other ways. seconds as a bulb check when the ignition switch is first WARNING! turned ON. If the light is not lit during starting, see your authorized dealer.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 WARNING! (Continued) WARNING! (Continued) • Never put floor mats or other floor coverings on top of already installed floor mats. Additional floor mats and other coverings will reduce the size of the pedal area and interfere with the pedals. • Check mounting of mats on a regular basis. Always properly reinstall and secure floor mats that have been removed for cleaning.
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lights Have someone observe the operation of exterior lights while you work the controls. Check turn signal and high beam indicator lights on the instrument panel. Door Latches Check for positive closing, latching, and locking. Fluid Leaks Check area under vehicle after overnight parking for fuel, engine coolant, oil, or other fluid leaks.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS 䡵 Power Convertible Top — If Equipped . . . . . . . 74 ▫ Heated Mirrors — If Equipped . . . . . . . . . . . . 79 ▫ Lowering The Power Top . . . . . . . . . . . . . . . 74 ▫ Sun Visors . . . . . . . . . . . . . . . . . . . . . . . . . . 79 ▫ Raising The Power Top . . . . . . . . . . . . . . . . . 74 䡵 BLUE&ME™ Hands-Free Communication — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . . . ▫ Wind Stop . . . . . . . . . . . . . . . . . . .
72 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Seat Height Adjustment . . . . . . . . . . . . . . . . . 90 ▫ Turn Signals . . . . . . . . . . . . . . . . . . . . . . . . . 98 ▫ Ez Entry Feature . . . . . . . . . . . . . . . . . . . . . . 90 ▫ Lane Change Assist . . . . . . . . . . . . . . . . . . . . 98 ▫ Memory Feature . . . . . . . . . . . . . . . . . . . . . . 91 ▫ Follow Me Home/Headlight Delay . . . . . . . . 98 ▫ Heated Seats — If Equipped . . . . . . . . . . . . . 91 ▫ Interior Lights . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 73 ▫ To Resume Speed . . . . . . . . . . . . . . . . . . . . 107 ▫ Wind Buffeting . . . . . . . . . . . . . . . . . . . . . . 115 ▫ To Vary The Speed Setting . . . . . . . . . . . . . . 107 ▫ Emergency Operation . . . . . . . . . . . . . . . . . 116 ▫ To Accelerate For Passing . . . . . . . . . . . . . . 107 ▫ Sun Shade — If Equipped . . . . . . . . . . . . . . 116 䡵 Rear Park Assist — If Equipped . . . . . . . . . . . 108 䡵 Electrical Power Outlets . . . .
74 UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER CONVERTIBLE TOP — IF EQUIPPED On vehicles equipped with a power convertible top, the power convertible top switch is located on the overhead console. The switch contains two buttons. The passenger side button, which is used to open the power top, and the driver side button, which is used to close the power top. NOTE: The power top buttons will operate when the ignition switch is turned to the ON/RUN or ACC position and when in the power accessory delay.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 75 NOTE: Rail lubrication is recommended every 2000 cycles, or if scratching noises due to dust are present. Refer to “Fluids, Lubes, and Genuine Part” in “Maintaining Your Vehicle” for information. CAUTION! (Continued) • Use care when washing the vehicle, water pressure directed at the weather strip seals may cause water to leak into the vehicles interior.
76 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Inside Day/Night Mirror The mirror can be adjusted up, down, left, and right for various drivers. The mirror should be adjusted to center on the view through the rear window. Headlight glare from vehicles behind you can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle). The mirror should be adjusted while set in the day position (toward the windshield).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 77 Automatic Dimming Mirror — If Equipped This mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light to the left of the button will illuminate to indicate when the dimming feature is activated. The sensor to the right of the button does not illuminate. 3 NOTE: This feature is disabled when the vehicle is moving in reverse.
78 UNDERSTANDING THE FEATURES OF YOUR VEHICLE mirror, press the mirror select switch to either the L (left) Power Mirrors The power mirror controls are located on the driver’s or R (right) to select the mirror you need to adjust. door trim panel. Using the mirror control switch, press on any of the four arrows for the direction that you want the mirror to move. WARNING! Vehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 79 Spotter Mirror — If Equipped Folding Mirrors Some models are equipped with a driver’s side spotter The exterior mirrors are hinged to allow the mirror to mirror. The spotter mirror allows for a greater range of pivot forward or rearward to help avoid damage. The visibility on the driver’s side of the vehicle. mirror has three detent positions: full forward, normal and full rearward. Heated Mirrors — If Equipped These mirrors are heated to melt frost or ice.
80 UNDERSTANDING THE FEATURES OF YOUR VEHICLE BLUE&ME™ HANDS-FREE COMMUNICATION — IF EQUIPPED Overview Windows Mobile™-based FIAT BLUE&ME™ is a personal telematic system enabling you to use communication and entertainment applications expressly designed for use in the car. The BLUE&ME™ system installed on your car is equipped with a hands-free kit, message reader and media player, and it is preset for future installation of additional services.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 81 you are not required to train the voice recognition system to recognize your voice. This implies that the system is nearly equally performing with different persons, i.e.: the voice recognition system is of the “speaker independent” type. The Hands-Free Kit The basic characteristic of this hands-free kit is voice recognition with Bluetooth威 wireless technology.
82 UNDERSTANDING THE FEATURES OF YOUR VEHICLE your mobile phone manually and visually using the For further details on the mobile phones supported by steering wheel controls and the instrument panel multi- BLUE&ME™, refer to section BLUE&ME™ SUPPORTED function display. MOBILE PHONES. To get started with BLUE&ME™ hands-free kit with voice recognition, you have to simply pair your Bluetooth威 wireless technology enabled mobile phone with the system. Pairing is an operation that has to be made only once.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 83 list or directly pronouncing the phone number, to (LAST CALLS and PHONEBOOK ) and the media answer a call and also to answer another incoming player. To activate settings when travelling you can only use voice commands. phone call. • To interact with BLUE&ME™ you can use either the The hands-free kit enables the following operations: buttons on the steering wheel or voice commands.
84 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • To Answer A Call — you can answer an incoming call After you place your mobile phone in the car environby pressing the MAIN/Phone button on the steering ment and create a pairing relationship with BLUE&ME™, you can make phone calls by speaking wheel. keywords or pressing buttons on the steering wheel.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 85 NOTE: Not all mobile phones support the SMS text • To read the messages received and stored. Messages message reader function or automatic phonebook transcan be read multiple times. fer via Bluetooth威. Consult www.fiatusa.com for further • To call the SMS text sender using the buttons on the information on the list of compatible mobile phones. steering wheel or voice commands.
86 UNDERSTANDING THE FEATURES OF YOUR VEHICLE In this way, while you are driving you can play your NOTE: • The media player does not support audio files comfavorite personal music collections. pressed with other formats and DRM (Digital Right • iPod威 Player — see dedicated paragraph under Media Management) protected audio files. Non-supported Player Functions. audio files that may be present on the USB device will The media player enables the following operations: be ignored.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 87 WARNING! WARNING! (Continued) • Operating certain parts of this system while driving can distract your attention away from the road, and possibly cause an accident or other serious consequences; for this reason certain functions shall be disabled by the BLUE&ME™ system until driving conditions are secure and, if required, only when the car is stopped.
88 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • It is dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. In a collision, people riding in these areas are more likely to be seriously injured or killed. • Be sure everyone in your vehicle is in a seat and using a seat belt properly.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 89 WARNING! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could result from a poorly adjusted seat belt. Recline Adjustment The recline adjustment lever is located on the inboard side of the seat.
90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Seat Height Adjustment The driver’s seat height can be raised or lowered by using a lever, located on the outboard side of the seat. Pump the lever upward to raise the seat height, or pump the lever downward to lower the seat height. EZ Entry Feature The driver and front passenger seats have an EZ entry feature for rear seat passengers.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91 Lift the seatback upright and push the seat rearward to the seat back memory being set only – The track will then be locked forward of its last set fore/aft memory posiits locked position once the rear passengers are seated. tion.
92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion or other physical condition must exercise care when using the seat heater. It may cause burns even at low temperatures, especially if used for long periods of time. • Do not place anything on the seat that insulates against heat, such as a blanket or cushion.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 To raise the head restraint, pull upward on the head Reactive Head Restraints do not return to their normal restraint. To lower the head restraint, press the push position, see your authorized dealer immediately. button, located at the base of the head restraint, and push NOTE: The head restraints should only be removed by downward on the head restraint. qualified technicians, for service purposes only.
94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE downward on the head restraint. Refer to “Occupant TO OPEN AND CLOSE THE HOOD Restraints” in “Things To Know Before Starting Your To open the hood, two latches must be released. Vehicle” for information on tether routing. 1. Pull the bottom of the RED hood release lever, located on the left kick panel, rearward.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95 2. Rotate the safety catch under the front edge of the In hot climates, the prop rod may be hot. Pick up the prop hood, near the center, and raise the hood. rod at the foam on the end of the prop rod. WARNING! Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision. Failure to follow this warning could result in serious injury or death.
96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE LIGHTS Multifunction Lever The multifunction lever, located on the left side of the steering wheel, controls the operation of the headlights, headlight beam selection, passing light and turn signals. NOTE: The external lights can only be turned on with the ignition in the ON/RUN position. Headlights Rotate the end of the multifunction lever upward to the first detent for headlight operation.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97 High Beams With the low beams activated, push the multifunction lever towards the instrument panel to turn on the high beams. Pull the multifunction lever toward the steering wheel to turn off the high beams. Flash-To-Pass You can signal another vehicle with your headlights by lightly pulling the multifunction lever toward the steering wheel. This will turn on the high beams until the lever is released.
98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turn Signals Push the multifunction lever upward to signal a right turn or downward to signal a left turn. The corresponding indicator in the instrument cluster will blink to indicate the operation of the turn signal. NOTE: The indicators will automatically turn off when the turn has been completed and the steering wheel is returned to a straight position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 Deactivation Pull the multifunction lever toward the steering wheel and hold it for more than two seconds. CAUTION! Before getting out of the vehicle be sure that the switch is in the center position or that the lights are off to avoid draining the battery. Interior Lights The interior light switches are located in the overhead console.
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Interior Light Timing (On/Right Position) • When all doors are closed a 15 minute timer is activated. NOTE: The timer is deactivated when the key is moved into the ON/RUN position. Front Fog Lights — If Equipped The fog light switch is located on the center stack of the instrument panel, just below the radio. Fog Light Switch Press the switch once to turn the front fog lights on. Press the switch a second time to turn the front fog lights off.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 WINDSHIELD WIPERS AND WASHERS The windshield wiper/washer lever is located on the right side of the steering column. NOTE: The windshield wipers/washers will only operate with the ignition in the ON/RUN position. 3 Front Windshield Wiper Operation There are five different modes of operation for the front windshield wipers.
102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The Intermittent function only has one detent Front Windshield Washer Operation but wiper delay will vary with changes in vehicle speed. Pull the windshield wiper/washer lever toward the As vehicle speed increases the delay time will decrease. steering wheel to activate the washers. The wipers will activate automatically for three cycles after the lever is Low Speed released. Push the lever downward to the second detent.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 CAUTION! (Continued) • Always remove any buildup of snow that prevents the windshield wiper blades from returning to the off position. If the windshield wiper control is turned off and the blades cannot return to the off position, damage to the wiper motor may occur. Rear Windshield Wiper Rotate the end of the windshield wiper/washer lever upward to the first detent past the intermittent settings for intermittent wipe operation.
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Windshield Washer Operation Push the windshield wiper/washer lever toward the instrument panel to activate the rear washer. Push and hold the lever for more than a half second and the wipers will activate automatically for three cycles after the lever is released. TILT STEERING COLUMN — IF EQUIPPED This feature allows you to tilt the steering column upward or downward.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 WARNING! Do not adjust the steering column while driving. Adjusting the steering column while driving or driving with the steering column unlocked, could cause the driver to lose control of the vehicle. Be sure the steering column is locked before driving your vehicle. Failure to follow this warning may result in serious injury or death.
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE system can be reactivated by pushing the Electronic To Set A Desired Speed Speed Control ON/OFF button and resetting the desired Turn the Electronic Speed Control ON. When the vehicle has reached the desired speed, press the SET (-) button vehicle set speed. and release. Release the accelerator and the vehicle will To Activate operate at the selected speed. Push the ON/OFF button. The Cruise Indicator light in the instrument cluster will illuminate.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 To Resume Speed To resume a previously set speed, push the RES (+) button and release. Resume can be used at any speed above 20 mph (32 km/h). To decrease speed while the Electronic Speed Control is set, push the SET (-) button. If the button is continually held in the SET (-) position, the set speed will continue to decrease until the button is released. Release the button when the desired speed is reached, and the new set speed will be established.
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Using Electronic Speed Control On Hills REAR PARK ASSIST — IF EQUIPPED The transmission may downshift on hills to maintain the The Rear Park Assist system provides an audible indicavehicle set speed. tion of the distance between the rear fascia/bumper and a detected obstacle when backing up, e.g. during a NOTE: The Electronic Speed Control system maintains parking maneuver. Refer to the “Park Assist System speed up and down hills.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 Rear Park Assist Sensors The four Rear Park Assist sensors, located in the rear fascia/bumper, monitor the area behind the vehicle that is within the sensors’ field of view.
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Audible And Visual Signals Supplied By The Rear Park Assist System. SIGNAL Obstacle Distance Failure MEANING INDICATION Audible signal (dashboard loudspeaker) • Sound pulses emitted at a rate that inAn obstacle is present within the creases as the distance decreases. sensors’ field of view • Emits continuous tone at 12 in (30 cm) • Adjustable volume level. (Refer to “Menu Functions” for further information).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 Failure Indications A malfunction of the Rear Park Assist sensors or system is indicated, during REVERSE gear engagement, by the instrument panel warning icon. Cleaning The Rear Park Assist System Clean the Rear Park Assist sensors with water, car wash soap and a soft cloth. Do not use rough or hard cloths.
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE not be covered with ice, snow, slush, mud, dirt or debris. Failure to do so can result in the system not working properly. The Rear Park Assist system might not detect an obstacle behind the fascia/bumper, or it could provide a false indication that an obstacle is behind the fascia/bumper. • Objects such as bicycle carriers, etc., must not be placed within 12 in (30 cm) from the rear fascia/ bumper while driving the vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 WARNING! WARNING! (Continued) • Drivers must be careful when backing up even when using the Rear Park Assist system. Always check carefully behind your vehicle, look behind you, and be sure to check for pedestrians, animals, other vehicles, obstructions, and blind spots before backing up. You are responsible for safety and must continue to pay attention to your surroundings. Failure to do so can result in serious injury or death.
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER SUNROOF — IF EQUIPPED The power sunroof roof switch is located in the overhead console. Power Sunroof Switch WARNING! • Never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unattended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 To Open Press and hold the power sunroof switch rearward for approximately one second and the sunroof will stop at the vented position. Press the switch a second time and hold for approximately one second and release, the sunroof will open fully, then stop automatically. This is called “Express Open”. During Express Open operation, any movement of the sunroof switch will stop the sunroof. for approximately one second after the reversal occurs.
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Emergency Operation In case of electrical failure the sunroof can be operated with the hex wrench that is located in the glove box. There is a plug located in the rear of the sunroof opening at the center of the vehicle. Removing the plug reveals a hex opening in the motor assembly of the sunroof. Insert the hex wrench and turn, moving the sunroof to the desired location.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 ELECTRICAL POWER OUTLETS There is a standard 12 Volt (13 Amp) power outlet, located in the floor console, for added convenience. This power outlet can power mobile phones, electronics and other low power devices. Power is available when the ignition switch is in the ON/RUN or START position. Insert the cigar lighter or accessory plug into the outlet for use. To preserve the heating element, do not hold the lighter in the heating position.
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! To avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 Volt outlet. • Do not touch with wet hands. • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.e., cellular phones, etc.). Eventually, if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting. • Accessories that draw higher power (i.e., coolers, vacuum cleaners, lights, etc.) will degrade the battery even more quickly.
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE For rear passengers, there are cupholders located on the CUPHOLDERS For the driver and front passenger, cupholders are lo- floor between the front driver and passenger seats. cated on the floor console between the front seats.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 STORAGE Passenger Seat Storage — If Equipped Some models may be equipped with storage under the Glove Box Compartment front passenger seat. Pull outward on the latch to open The glove box is located on the right side of the instruthe storage compartment. ment panel. Pull outward on the door latch to open the glove box. Push the glove box door upward to close it.
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CARGO AREA FEATURES The rear seatbacks have a fold down feature to allow increased cargo capacity. Push down the release button, located at the outboard top of the seatback and move the seatback to its foldeddown position to provide a flat load floor cargo area. When returning the seatback to its upright position, push rearward until the seatback is properly latched.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 window defroster is on. The rear window defroster automatically turns off after approximately 20 minutes. To manually shut the defroster off, push the button a second time. NOTE: To prevent excessive battery drain, use the rear window defroster only when the engine is operating. CAUTION! Folded Rear Seats REAR WINDOW FEATURES Rear Window Defroster The rear window defroster button is located in the center of the instrument panel, below the radio.
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! (Continued) • Do not use scrapers, sharp instruments, or abrasive window cleaners on the interior surface of the window. • Keep all objects a safe distance from the window.
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS 䡵 Instrument Panel Features . . . . . . . . . . . . . . . 127 ▫ Trip Computer . . . . . . . . . . . . . . . . . . . . . . 146 䡵 Instrument Cluster . . . . . . . . . . . . . . . . . . . . 128 ▫ Trip Button . . . . . . . . . . . . . . . . . . . . . . . . 146 䡵 Instrument Cluster Descriptions . . . . . . . . . . . 129 ▫ Trip Functions . . . . . . . . . . . . . . . . . . . . . . 147 䡵 Electronic Vehicle Information Center (EVIC) . . 140 ▫ Values Displayed . .
126 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Technical Specifications . . . . . . . . . . . . . . . . 160 ▫ Radio Operation . . . . . . . . . . . . . . . . . . . . . 184 ▫ Quick Guide . . . . . . . . . . . . . . . . . . . . . . . 161 ▫ CD Player Operation . . . . . . . . . . . . . . . . . . 184 ▫ General Information . . . . . . . . . . . . . . . . . . 163 ▫ Operating Instructions — Hands-Free Phone (If Equipped) . . . . . . . . . . . . . . . . . . . . . . . 185 ▫ Functions And Adjustments . . . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL 127 INSTRUMENT PANEL FEATURES 4 1 2 3 4 5 6 — Side Vent — Multifunction Lever – Light Control — Instrument Cluster And Warning Lights — Windshield Wiper, Washer, Trip Computer — Central Air Vents — Storage Compartment/Radio 7 — Passenger Air Bag 8 — Glove Compartment 9 — Rear Defrost Button 10 — Hazard Button 11 — Climate Controls 12 — Power Windows Control 13 14 15 16 — — — — Storage Compartment Shift Lever Sport Button Horn/Driver Airbag
128 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER
UNDERSTANDING YOUR INSTRUMENT PANEL 129 2. Rear Defrost Button Press and release this button to turn on the rear 1. Glow Plug Light — If Equipped window defroster. This indicator will illuminate The Glow Plug light will flash during engine oil when the rear window defroster is on. The rear window viscosity sensor measurement in cold weather. defroster automatically turns off after 20 minutes. During this measurement (up to 10 seconds), the starter will be disabled.
130 UNDERSTANDING YOUR INSTRUMENT PANEL long the function remains active. For further information, 3. Front Fog Light Indicator — If Equipped This indicator will illuminate when the front fog refer to “Follow Me Home” in “Understanding The Features of Your Vehicle”. lights are on. 7. Turn Signal Indicators 4. Low Fuel Light The arrows will flash in unison with the exteWhen the fuel level reaches approximately 1.0 galrior turn signal, when using the turn signal lon (3.
UNDERSTANDING YOUR INSTRUMENT PANEL 131 9. Air Bag Warning Light This light will turn on for four seconds as a bulb check when the ignition switch is first turned to ON/RUN. If the light is either not on during starting, stays on, or turns on while driving, have the system inspected at an authorized dealer as soon as possible. Refer to “Occupant Restraints” in “Things To Know Before Starting Your Vehicle” for further information. Reminder Light will illuminate and the chime will sound.
132 UNDERSTANDING YOUR INSTRUMENT PANEL 13. Power Steering System Warning This light is used to manage the electrical warning of the EPS (Power Steering System). Refer to “Power Steering” in “Starting and Operating” for further information. 14. Electronic Throttle Control (ETC) Light This light informs you of a problem with the Electronic Throttle Control (ETC) system. If a problem is detected, the light will come on while the engine is running.
UNDERSTANDING YOUR INSTRUMENT PANEL 133 Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle’s handling and stopping ability.
134 UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause sensor damage.
UNDERSTANDING YOUR INSTRUMENT PANEL 135 Certain conditions, such as a loose or missing gas cap, poor fuel quality, etc., may illuminate the MIL after engine start. The vehicle should be serviced if the light stays on through several of your typical driving cycles. In most situations, the vehicle will drive normally and will not require towing. CAUTION! Prolonged driving with the MIL on could cause damage to the engine control system. It also could affect fuel economy and drivability.
136 UNDERSTANDING YOUR INSTRUMENT PANEL If the light turns on while driving, safely pull over and WARNING! stop the vehicle. If the A/C system is on, turn it off. Also, shift the transmission into NEUTRAL and idle the ve- Driving a vehicle with the red brake light on is hicle. If the temperature reading does not return to dangerous. You could have a collision. Have the normal, turn the engine off immediately and call for vehicle checked immediately. service.
UNDERSTANDING YOUR INSTRUMENT PANEL 137 The light also will turn on when the parking brake is Activation/Malfunction Indicator Light comes on conapplied with the ignition switch in the ON/RUN posi- tinuously with the engine running, a malfunction has been detected in the ESC system. If this light remains on, tion. see your authorized dealer as soon as possible to have the NOTE: This light shows only that the parking brake is problem diagnosed and corrected. applied.
138 UNDERSTANDING YOUR INSTRUMENT PANEL If the ABS light remains on or turns on while driving, it indicates that the Anti-Lock portion of the brake system is not functioning and that service is required. However, the conventional brake system will continue to operate normally if the BRAKE warning light is not on. 25. Temperature Gauge The temperature digital scale shows engine coolant temperature. Any reading within the normal range indicates that the engine cooling system is operating satisfactorily.
UNDERSTANDING YOUR INSTRUMENT PANEL 139 WARNING! A hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. You may want to call an authorized dealership for service if your vehicle overheats. If you decide to look under the hood yourself, see “Maintaining Your Vehicle.” Follow the warnings under the “Cooling System Pressure Cap” paragraph. as it was before the repair or service.
140 UNDERSTANDING YOUR INSTRUMENT PANEL 27. Fuel Gauge / Fuel Door Reminder The fuel door reminder indicates that the fuel filler door is located on the right side of the vehicle. When the ignition switch is in the ON/RUN position, the digital scale will show the level of fuel remaining in the fuel tank. ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) The Electronic Vehicle Information Center (EVIC) features a driver-interactive display that is located in the instrument cluster.
UNDERSTANDING YOUR INSTRUMENT PANEL 141 The EVIC consists of the following: • System Status • Vehicle Information Warning Message Displays • Personal Settings (Customer-Programmable Features) • Outside Temperature Display • Trip Computer Functions 4
142 UNDERSTANDING YOUR INSTRUMENT PANEL EVIC Displays EVIC Display Automatic Transmission EVIC Display Manual Transmission 1 2 3 4 5 — — — — — Temperature Indicator Fuel Level Gauge Clock Odometer Sport Mode 6 — Message Display 7 — Coolant Temperature Gauge 8 — Digital Speedometer 9 — Ice Warning Indicator 10 — Gear Shift Indicator (GSI) 1 2 3 4 5 — — — — — Ice Warning Indicator Temperature Indicator Fuel Level Gauge Clock Odometer 6 — Message Display 7 — Coolant Temperature Gauge 8 — Digital Speed
UNDERSTANDING YOUR INSTRUMENT PANEL 143 EVIC Control Buttons Press the MENU ESC button briefly to access the menu and/or go to next screen or to confirm the required menu option. Press and hold the MENU ESC button (approximately one second) to return to the main screen. NOTE: When opening one of the front doors, the EVIC display will turn on the clock and the miles or kilometers covered (for versions/markets, where provided) for a few seconds.
144 UNDERSTANDING YOUR INSTRUMENT PANEL • Set Date • See Radio • Speed Display • Autoclose • Units • Language • Buzzer Volume • Button Volume • Daylights (D.R.L.) • Hill Start • Exit Menu Selecting An Option Of The Main Menu Without Submenu 1. Briefly press the MENU ESC button to select the main menu option to set. 2. Press the + or – button (by single presses) to select the new setting. 3. Briefly press the MENU ESC button to store the new setting and go back to the main menu option previously selected.
UNDERSTANDING YOUR INSTRUMENT PANEL 145 3. Briefly press the MENU ESC button to select the indicator system is duty cycle based, which means the displayed submenu option and to open the relevant engine oil change interval may fluctuate, dependent upon your personal driving style. setup menu. 4. Press the + or – button (by single presses) to select the Unless reset, this message will continue to display each time you turn the ignition switch to the ON/RUN new setting for this submenu option. position.
146 UNDERSTANDING YOUR INSTRUMENT PANEL Trip Computer • When the “Trip distance” reaches 9999.9 miles or The Trip Computer is located in the instrument cluster. It kilometers or when the “Travel time” reaches 99.59 features a driver-interactive display (displays informa(99 hours and 59 minutes), the system is reset autotion such as; trip information, range, fuel consumption, matically. average speed and travel time). • Disconnecting/Reconnecting the battery resets the Trip Button system.
UNDERSTANDING YOUR INSTRUMENT PANEL 147 Briefly press the MENU ESC button to go back to the • Average consumption B menu screen or press and hold the MENU ESC (approxi• Average speed B mately one second) to go back to the main screen without • Travel time B (driving time). storing settings. Trip Functions NOTE: “Trip B” functions may be excluded (see “Trip B Both trip functions are resettable (reset — start of new Data”). “Range” and “Instantaneous consumption” cantrip). not be reset.
148 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The range depends on several factors: driving Travel Time style, type of route (freeway, residential, mountain roads, This value shows the time elapsed since the last reset. etc.), conditions of use of the car (load, tire pressure, etc.). Personal Settings (Customer-Programmable Trip planning must take into account the above notes. Features) Distance Travelled Dimmer This value shows the distance covered since the last reset.
UNDERSTANDING YOUR INSTRUMENT PANEL 149 NOTE: Selection is possible between 20 and 125 mph or km/h, depending on the selected unit. The setting will increase/decrease by five units each time the +/– button is pressed. Press and hold the +/– button to increase/ decrease the setting rapidly. Save the setting by briefly Speed Beep (Speed Limit) pressing the button when you approach the required With this function it is possible to set the car speed limit setting.
150 UNDERSTANDING YOUR INSTRUMENT PANEL 3. Briefly press the MENU ESC button to go back to the Set Time (Clock) menu screen, or press and hold the MENU ESC button This function may be used to set the clock through two (approximately one second) to go back to the main screen sub-menu items: “Time” and “Mode.” without storing the settings. Proceed as follows: Trip B Data (Trip B On) 1. Briefly press the MENU ESC button.
UNDERSTANDING YOUR INSTRUMENT PANEL 151 NOTE: • The setting will increase or decrease by one unit each time the + or – button is pressed. Press and hold the button to increase/decrease the setting rapidly. Save the setting by briefly pressing the button when you approach the required setting. Set Date This function may be used to set the date (day - month year). To change the date proceed as follows: 1. Briefly press the MENU ESC button and “year” will flash on the display.
152 UNDERSTANDING YOUR INSTRUMENT PANEL + or – button to increase/decrease the setting rapidly. To activate (On) or to deactivate (Off) the sound system Save the setting by briefly pressing the button when you info displaying proceed as follows: approach the required setting. 1. Briefly press the MENU ESC button “On” or “Off” • Briefly press the MENU ESC button to go back to the will flash on the display (according to the previous menu screen, or press and hold the MENU ESC button setting).
UNDERSTANDING YOUR INSTRUMENT PANEL 153 To activate (On) or to deactivate (Off) the speed display feature, proceed as follows: To change the setting proceed as follows: 1. Briefly press the MENU ESC button “On” or “Off” 1. Briefly press the MENU ESC button. “MPH”, “km/ will flash on the display (according to the previous h”, then “Off” will flash on the display (according to setting). previous setting). 2. Press the + or – button for setting. 2. Press the + or – button to select display deactivation 3.
154 UNDERSTANDING YOUR INSTRUMENT PANEL 2. Press the + or – button to navigate the three sub- If the distance unit set is “km,” the fuel economy unit will menus. be displayed in either km/l or l/100km. 3. Select the required sub-menu and then briefly press 1. Press the + or – button for setting. the MENU ESC button. 2. Briefly press the MENU ESC button to return to the 4. When accessing the “Distance” submenu: briefly press sub-menu. the MENU ESC button. Either “mi” or “km” will appear 3.
UNDERSTANDING YOUR INSTRUMENT PANEL 155 To adjust the volume proceed as follows: Language (Selecting The Language) The messages can be displayed in the following lan1. Briefly press the MENU ESC button. The previously guages: Italian, English, German, Portuguese, Spanish, set volume “level” will flash on the display. French, Dutch, Polish. 2. Press the + or – button for setting. To set the required language, proceed as follows: 3. Briefly press the MENU ESC button to go back to the 1.
156 UNDERSTANDING YOUR INSTRUMENT PANEL 3. Briefly press the MENU ESC button to go back to the 3. Press the + or – button for setting. menu screen, or press and hold the MENU ESC button 4. Briefly press the MENU ESC button to go back to the (approximately one second) to go back to the main screen menu screen, or press and hold the button (approxiwithout storing the settings. mately one second) to go back to the main screen without storing the settings. Belt Buzzer (Buzzer Activation For S.B.R.
UNDERSTANDING YOUR INSTRUMENT PANEL 157 3. Briefly press the MENU ESC button to go back to the SALES CODE (RAB) RADIO menu screen, or press and hold the button (approximately one second) to go back to the main screen without storing the settings. Exit Menu This function closes the initial menu screen. Briefly press the MENU ESC button to go back to the main screen. Press the – button to return to the first menu option (Speed Beep). Press the + button to return to the last menu option (Daylights).
158 UNDERSTANDING YOUR INSTRUMENT PANEL If the radio has BLUE&ME™, refer to the appropriate “BLUE&ME™ User’s Manual” for further information. The instructions for use are given below and we recommend you to read them carefully. Suggestions WARNING! Having the volume turned up high can cause the driver to no be able to hear important traffic sounds, i.e. sirens, horns, etc. This could cause an accident. Always adjust the volume so that you can still hear background noises.
UNDERSTANDING YOUR INSTRUMENT PANEL 159 • Clean every CD thoroughly removing any finger • The use of original CD media is required for the best marks or dust using a soft cloth. Hold CDs by the quality audio production. Correct operation is not outside and clean them from the middle outwards. guaranteed when CD-R/RW media are used that were not correctly burned and/or with a maximum capacity • Never use chemicals (e.g. antistatics or thinners or above 650 Mb.
160 UNDERSTANDING YOUR INSTRUMENT PANEL • The CD player is capable of reading most compression With Bose威 Premium Audio system (if equipped): systems currently in use, following the development • Two 165 mm diameter midwoofer speakers. of these systems, the reading of all compression for• Two 11 mm tweeter speakers in the front pillars. mats is not guaranteed. Technical Specifications The complete system consists of: • Two 100 mm full range speakers, one speaker in each of the rear side panels.
UNDERSTANDING YOUR INSTRUMENT PANEL 161 Quick Guide Radio Controls BUTTON TUNER A-B-C MEDIA BUTTON (Mute/Pause Button) AUDIO GENERAL FUNCTIONS On Off AM, FM, SAT (if equipped) source selection Cycles A, B, C presets for AM, FM, SAT (if equipped) CD/AUX/Media Player (if equipped and present) source selection MODE Short button press Long button press Short repeated button press GENERAL FUNCTIONS Volume activation/deactivation (Mute/ Pause) Audio adjustments: low tones (BASS), high tones (TREBLE), left/ri
162 UNDERSTANDING YOUR INSTRUMENT PANEL BUTTON (Information Button) MENU +Vol/–Vol BUTTON GENERAL FUNCTIONS MODE Song, Artist, Album, Genre, Playlist, Folder information (if available) in CD, Media Player and Satellite (if so equipped); Toggles RBDS information in FM Advanced functions adjustment Menu activation: short button press Adjustment type selection: press or Adjustment of values: press or Volume adjustment Press + button: volume increase Press – button: volume decrease RADIO FUNCTIONS Radio Sta
UNDERSTANDING YOUR INSTRUMENT PANEL 163 BUTTON 12345 RADIO FUNCTIONS Current radio station storing Stored station recall BUTTON CD FUNCTIONS CD ejection Previous/next track play CD track fast forward/rewind Previous/next folder play (for CD-MP3) General Information The radio offers the following functions: Radio Section • PLL tuning with FM/AM/MW frequency bands • RBDS (Radio Broadcast Data System) • Automatic/manual station tuning MODE Long button press for memory preset 1 to 5 respectively Short but
164 UNDERSTANDING YOUR INSTRUMENT PANEL • SPEED VOLUME function: Customer selectable automatic volume adjustment depending on the car speed • Automatic Stereo/Mono selection CD Section • Track selection (forward/backward) • Fast forward/rewind through tracks WARNING! On multimedia CDs, besides audio tracks, there are data tracks too. Playing this type of CD could cause hissing at a volume that could jeopardize road safety as well as causing damage to the final stages and the speakers.
UNDERSTANDING YOUR INSTRUMENT PANEL 165 When the car radio is turned on and the on volume limit is on, the volume is limited to a setting of five even if it had been set higher when previously used. Audio Section • Mute/pause function • Soft mute function • Loudness function • Graphic 7 band equalizer (if equipped) Turning The Car Radio Off Press and hold (approximately 2 seconds) the (ON/OFF) button to turn the radio off.
166 UNDERSTANDING YOUR INSTRUMENT PANEL Mute/Pause Function Press the button briefly to activate the MUTE function. The volume will gradually decrease and the wording “TUNER Mute” will be shown on the display (in radio mode) or “CD Pause” (in CD mode). display will show the Bass level value for the source activated at that time (e.g. in FM mode the display will show the wording “FM Bass +2”). Use the buttons or to scroll through the Menu functions.
UNDERSTANDING YOUR INSTRUMENT PANEL 167 • EQUALIZER — if equipped (activation and selection Balance Adjustment Proceed as follows: of factory equalization adjustments) • USER EQUALIZER — if equipped (customized equal- 1. Press AUDIO button. ization adjustment) or button to set “Balance” in the 2. Press the Tone Adjustment AUDIO menu. Proceed as follows: button to increase the sound from the 3. Press the button to increase the sound from 1. Press AUDIO button. left speakers or the the right speakers.
168 UNDERSTANDING YOUR INSTRUMENT PANEL Fader Adjustment Proceed as follows: Loudness Function — If Equipped The Loudness function improves the volume of the sound while listening at low volumes, increasing the bass and treble. 1. Press AUDIO button. 2. Press the AUDIO menu. or button to set “Fader” in the To activate/deactivate this function, select the “Loudness” setting in the AUDIO menu.
UNDERSTANDING YOUR INSTRUMENT PANEL 169 To activate the equalizer, use the AUDIO button or to 3. Use or buttons to select ⬙EQ User.⬙ select one of the adjustments: 4. Press MENU button to start adjusting equalizer. • “EQ User” (adjustment of 7 equalizer bands that can 5. On the display a 7 bar graph will appears, in which be changed by the user) each bar represents a frequency. Select the bar to be • “Classic” (equalizer preset for optimal classic music adjusted by using the or buttons.
170 UNDERSTANDING YOUR INSTRUMENT PANEL The current status of the selected function appears on the Speed Volume Function — If Equipped This function automatically adapts the volume level to display. the speed of the car, turning up the volume when the The functions managed by the Menu are: speed increases to maintain the ratio with the noise level • Speech Volume inside the passenger compartment. To activate/ deactivate the function, use the buttons.
UNDERSTANDING YOUR INSTRUMENT PANEL 171 The display shows the function status: NOTE: • Using the Menu it is only possible to adjust the • “On volume limit: on” – when the radio is turned on activation/deactivation of the function and not the the volume level will be: minimum or maximum volume value.
172 UNDERSTANDING YOUR INSTRUMENT PANEL • “Radio off: 20 min” — The radio turns off indepen- Radio dently from the ignition key; the radio remains on for (Tuner) Introduction a maximum period of 20 minutes after the key has When the car radio is turned on, the last function that been turned to the STOP position. was selected before turning it off (Radio, CD, CD MP3, System Reset Function AUX) is activated.
UNDERSTANDING YOUR INSTRUMENT PANEL 173 Each time the button is pressed the following bands are By pressing the preset button for more than 2 seconds, the tuned station will be stored. Pressing the A-B-C selected cyclically: button will change between the preset memory group in • AM, FM or SAT (if equipped) the current frequency band. Each band is highlighted by the corresponding wordings Automatic Tuning on the display.
174 UNDERSTANDING YOUR INSTRUMENT PANEL in the desired direction. If the or button is SIRIUS威 Satellite Radio pressed longer, the fast search starts and then stops when With over 130 channels, SIRIUS威 Satellite Radio brings you more of what you love. Get 69 channels of 100% the button is released. commercial-free music, plus all of your favorite sports, Stereophonic Broadcasters news, talk and entertainment.
UNDERSTANDING YOUR INSTRUMENT PANEL 175 Terms & Conditions available at sirius.com/service terms. SIRIUS Radio U.S. service only available to those at least 18 years of age in the 48 contiguous United States, D.C., and PR. Service available in Canada; see www.siriuscanada.ca. You can find SIRIUS’ current terms and conditions at http://www.sirius.com.
176 UNDERSTANDING YOUR INSTRUMENT PANEL when installed in the customer’s vehicle. To reactivate Sirius Subscription Issues When Replacing A your service, either call the number listed on the display Sirius Radio When a radio needs to be replaced, the dealer will need or visit the provider online. the SIRIUS information to order a new radio (even if the CAUTION! SIRIUS subscription has lapsed). The ESN number contains 12 digits.
UNDERSTANDING YOUR INSTRUMENT PANEL 177 It is advisable to use original CDs to ensure optimal playing. If CD-R/RWs are used, we recommend using Introduction good quality media that are burned at the slowest speed This chapter describes the operation of the CD player possible. only. To operate the radio, refer to the description in the CD Loading/Ejecting “Functions and Adjustments” chapter.
178 UNDERSTANDING YOUR INSTRUMENT PANEL Press the button with the radio turned on, to activate the motorized CD ejection system. After ejection, the last audio source listened to before playing the CD will be heard. A CD which cannot be read will not be ejected until these functions are over. At the end, with the CD mode activated, the display will show the wording “CD Disc error” for a few seconds and then the CD will be ejected.
UNDERSTANDING YOUR INSTRUMENT PANEL 179 beginning. In this case, if you want to play the previous NOTE: Layer-3 audio decoding technology is licensed from Fraunhofer IIS and Thomson multimedia. button twice consecutively. track, press the Track Fast Forward/Rewind Keep the button pressed down to fast forward the button pressed down to selected track and keep the fast rewind the track. The fast forward/rewind will stop once the button is released.
180 UNDERSTANDING YOUR INSTRUMENT PANEL • The music files should have the extension “.mp3” or move to the MP3 session while playing by keeping the “.wma” files with a different extension will not be CD button pressed for more than 2 seconds. reproduced. NOTE: When the function is activated the radio may • The sampling frequencies that can be reproduced are: take a few seconds to start playing. While checking the 44.1 kHz, stereo (from 96 to 320 kbit/s) – 22.05 kHz, disc the display will show “CD Reading.
UNDERSTANDING YOUR INSTRUMENT PANEL 181 Selection Of Next/Previous Folder • If the MP3 files on a CD-ROM are structured in Press the button to select a next folder or the sub-folders their structure is compressed to a single button to select the previous folder. The display will level structure, where the sub-folders are taken to the show the number of the folder. level of the main folders. The folders are selected cyclically.
182 UNDERSTANDING YOUR INSTRUMENT PANEL CD Player The Cd Does Not Play The CD is dirty. Clean the CD. The CD is scratched. Try using another CD. The Cd Can Not Be Loaded A CD is already loaded. Press the the CD. MP3 File Reading Operating Instructions — Hands-Free Phone (If Equipped) Refer to the appropriate “BLUE&ME™ User’s Manual” for further information.
UNDERSTANDING YOUR INSTRUMENT PANEL 183 STEERING WHEEL AUDIO CONTROLS The remote sound system controls are located on the rear surface of the steering wheel. Reach behind the wheel to access the switches. 4 1 — iPod威 Or External USB Device Holder 2 — Cable Jack 3 — USB Connector Refer to the appropriate Blue&Me™ radio User’s Manual for iPod威 or external USB device support capability.
184 UNDERSTANDING YOUR INSTRUMENT PANEL The right-hand control is a rocker-type switch with a pushbutton in the center and controls the volume and mode of the sound system. Pressing the top of the rocker switch will increase the volume, and pressing the bottom of the rocker switch will decrease the volume. Radio Operation Pressing the top of the switch will “Seek” up for the next listenable station and pressing the bottom of the switch will “Seek” down for the next listenable station.
UNDERSTANDING YOUR INSTRUMENT PANEL 185 6. Do not expose the disc to direct sunlight. Operating Instructions — Hands-Free Phone (If Equipped) 7. Do not store the disc where temperatures may become Refer to the appropriate Blue&Me™ User’s Manual for too high. further information. NOTE: If you experience difficulty in playing a particuCD/DVD DISC MAINTENANCE lar disc, it may be damaged (i.e.
186 UNDERSTANDING YOUR INSTRUMENT PANEL 1. Temperature Control CLIMATE CONTROLS The air conditioning and heating system is designed to Rotate this control to regulate the temperature of the air inside the passenger compartment. Rotating the dial to make you comfortable in all types of weather. the left into the blue area of the scale indicates cooler Manual Heating And Air Conditioning temperatures, while rotating to the right into the red area indicates warmer temperatures. 2.
UNDERSTANDING YOUR INSTRUMENT PANEL 187 NOTE: • Panel • Continuous use of the Recirculation mode may make Air is directed through the outlets in the instrument the inside air stuffy and window fogging may occur. panel. These outlets can be adjusted to direct airflow. Extended use of this mode is not recommended.
188 UNDERSTANDING YOUR INSTRUMENT PANEL the windshield. This setting is good for maintaining 5. A/C Button Press this button to engage the Air Conditioning. A light comfort while reducing moisture on the windshield. will illuminate when the Air Conditioning system is • Defrost engaged. Air is directed through the windshield and side window demister outlets. Use this mode with MAX A/C maximum blower and temperature settings for best For maximum cooling, use the A/C and recirculation modes at the same time.
UNDERSTANDING YOUR INSTRUMENT PANEL 189 Operating Tips Chart 4
190 UNDERSTANDING YOUR INSTRUMENT PANEL Automatic Temperature Control (ATC) — If Equipped • The Automatic Temperature Control (ATC) allows the driver to select individual comfort settings. • The system provides set-and-forget operation for optimum comfort and convenience. • The system can be controlled manually, if desired. The ATC system automatically maintains the interior comfort level desired by the driver and passenger. Automatic Temperature Control (ATC) 1.
UNDERSTANDING YOUR INSTRUMENT PANEL 191 2. A/C Button Press and release to change the current Air Conditioning (A/C) setting. Performing this function will cause the ATC to switch into manual mode. 6. Front Defrost Press and release to change the current setting. The indicator illuminates when ON. The blower will automatically default to medium-high if the Defrost mode is selected. Performing this function will cause the ATC to switch into manual mode. 3.
192 UNDERSTANDING YOUR INSTRUMENT PANEL 9. Blower Control Down Button • When the Auto indicator is on and the Recirculation There are 12 blower speeds. The blower speed decreases indicator is off, the Recirculation is in AUTO mode. If as you press this button. Performing this function will the Recirculation indicator is on, the Recirculation cause the ATC to switch into manual mode. setting is manual and Recirculation is on. Automatic Operation 10.
UNDERSTANDING YOUR INSTRUMENT PANEL 193 NOTE: • It is not necessary to move the temperature settings for cold or hot vehicles. The system automatically adjusts the temperature, mode and fan speed to provide comfort as quickly as possible. • The temperature can be displayed in U.S. or Metric units by selecting the US/M customer-programmable feature. Refer to the “Electronic Vehicle Information Center (EVIC) — Customer-Programmable Features” in this section of the manual.
194 UNDERSTANDING YOUR INSTRUMENT PANEL The operator can also select the direction of the airflow mode button to enter Bi-Level mode, the indicators by selecting one of the following positions. illuminate when ON. Performing this function will cause the ATC to switch into manual mode. Panel Mode Air comes from the outlets in the instrument panel. Mix Mode Each of these outlets can be individually adjusted to Air comes from the floor, defrost and side window demister outlets.
UNDERSTANDING YOUR INSTRUMENT PANEL 195 Air Conditioning (A/C) The Air Conditioning (A/C) button allows the operator to manually activate or deactivate the air conditioning system. When in A/C mode with the ATC set to a cool temperature, dehumidified air flows through the air outlets. If Economy mode is desired, press the A/C button to turn off the A/C mode in the ATC display and deactivate the A/C system.
196 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Tips Window Fogging Windows will fog on the inside when the humidity inside the vehicle is high. This often occurs in mild or cool temperatures when it’s rainy or humid. In most cases, turning the air conditioning (pressing the A/C button) on will clear the fog. Adjust the temperature control, air direction, and blower speed to maintain comfort. As the temperature gets colder, it may be necessary to direct air onto the windshield.
UNDERSTANDING YOUR INSTRUMENT PANEL 197 Vacation Storage Anytime you store your vehicle, or keep it out of service (i.e., vacation) for two weeks or more, run the air conditioning system at idle for about five minutes in the fresh air using the high blower setting. This will ensure adequate system lubrication to minimize the possibility of compressor damage when the system is started again.
STARTING AND OPERATING CONTENTS 䡵 Starting Procedures . . . . . . . . . . . . . . . . . . . . 203 ▫ Recommended Shift Speeds . . . . . . . . . . . . . 206 ▫ Manual Transmission – If Equipped . . . . . . . 203 ▫ Downshifting . . . . . . . . . . . . . . . . . . . . . . . 207 ▫ Automatic Transmission – If Equipped . . . . . 203 䡵 Automatic Transmission — If Equipped . . . . . . 207 ▫ Normal Starting . . . . . . . . . . . . . . . . . . . . . 203 ▫ Key Ignition Park Interlock . . . . . . . . . . . . .
200 STARTING AND OPERATING ▫ General Information . . . . . . . . . . . . . . . . . . 215 ▫ Four-Wheel Anti-Lock Brake System (ABS) . . 224 䡵 Driving On Slippery Surfaces . . . . . . . . . . . . . 216 䡵 Electronic Brake Control System . . . . . . . . . . . 225 ▫ Acceleration . . . . . . . . . . . . . . . . . . . . . . . . 216 ▫ Anti-Lock Brake System (ABS) . . . . . . . . . . . 226 ▫ Traction . . . . . . . . . . . . . . . . . . . . . . . . . . . 217 ▫ Brake Assist System (BAS) . . . . . . . . . . . .
STARTING AND OPERATING 201 ▫ Tire Loading And Tire Pressure . . . . . . . . . . 238 䡵 Tires — General Information 䡵 Tire Pressure Monitoring System (TPMS) . . . . . 252 . . . . . . . . . . . . . 242 ▫ Base System . . . . . . . . . . . . . . . . . . . . . . . . 254 ▫ Tire Pressure . . . . . . . . . . . . . . . . . . . . . . . 242 ▫ General Information . . . . . . . . . . . . . . . . . . 256 ▫ Tire Inflation Pressures . . . . . . . . . . . . . . . . 243 䡵 Fuel Requirements . . . . . . . . . . . . . .
202 STARTING AND OPERATING ▫ Loose Fuel Filler Cap Message . . . . . . . . . . . 263 䡵 Recreational Towing (Behind Motorhome, Etc.) . . 264 䡵 Trailer Towing . . . . . . . . . . . . . . . . . . . . . . . . 263 ▫ Towing This Vehicle Behind Another Vehicle . .
STARTING AND OPERATING 203 STARTING PROCEDURES Automatic Transmission – If Equipped Before starting your vehicle, adjust your seat, adjust both The shift lever must be in the PARK or NEUTRAL inside and outside mirrors, and fasten your seat belts. position before you can start the engine. Apply the brakes before shifting to any driving gear. WARNING! Never leave children in the vehicle alone. Leaving unattended children in a vehicle is dangerous for a number of reasons.
204 STARTING AND OPERATING Cold Weather Operation If Engine Fails To Start To prevent possible engine damage while starting at low WARNING! temperatures, this vehicle will inhibit engine cranking when the ambient temperature is less than –22° F (–30° C) Never pour fuel or other flammable liquids into the and the oil temperature sensor reading indicates an throttle body air inlet opening in an attempt to start engine block heater has not been used. An externallythe vehicle.
STARTING AND OPERATING 205 CAUTION! (Continued) • To prevent damage to the starter, do not continuously crank the engine for more than 15 seconds at a time. Wait 10 to 15 seconds before trying again. After Starting The idle speed will automatically decrease as the engine warms up. 5 MANUAL TRANSMISSION — IF EQUIPPED Five-Speed Manual Transmission WARNING! You or others could be injured if you leave the vehicle unattended without having the parking brake fully applied.
206 STARTING AND OPERATING Use each gear in numerical order; do not skip a gear. Be NOTE: sure the transmission is in first gear, not third, when • Clashing REVERSE gear, especially if vehicle is moving, can result in transmission damage. starting from a standing position. Damage to the clutch can result from starting in third gear. • During cold weather, until the transmission lubricant is warm, you may experience slightly higher shift For most city driving, you will find it easier to use only efforts.
STARTING AND OPERATING 207 Downshifting AUTOMATIC TRANSMISSION — IF EQUIPPED Proper downshifting will improve fuel economy and CAUTION! prolong engine life. CAUTION! If you skip more than one gear while downshifting or downshift at too high a vehicle speed, you could damage the engine, transmission, or clutch. To maintain a safe speed and prolong brake life, shift down to second or first gear when descending a steep grade.
208 STARTING AND OPERATING WARNING! It is dangerous to move the shift lever out of PARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly pressing on the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idling normally and when your foot is firmly pressing the brake pedal.
STARTING AND OPERATING 209 vehicle may be somewhat abrupt. This is a normal vehicle is stopped. Be sure to keep your foot on the brake condition, and precision shifts will develop within a few pedal when moving the shift lever between these gears. hundred miles (kilometers). The transmission shift lever has only PARK, REVERSE, NEUTRAL, and DRIVE shift positions. Manual shifts can be made using the AutoStick威 shift control (refer to “AutoStick威” in “Starting and Operating” for further information).
210 STARTING AND OPERATING Never attempt to use PARK while the vehicle is in motion. Apply the parking brake when leaving vehicle in this range. When parking on a level surface, you may place the shift lever in the PARK position first, and then apply the parking brake. When parking on a hill, apply the parking brake before placing the shift lever in PARK, otherwise the load on the transmission locking mechanism may make it difficult to move the shift lever out of PARK.
STARTING AND OPERATING 211 WARNING! (Continued) WARNING! (Continued) • It is dangerous to move the shift lever out of PARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idling normally and your foot is firmly pressing the brake pedal.
212 STARTING AND OPERATING CAUTION! • Before moving the shift lever out of PARK, you must turn the ignition switch from the LOCK/OFF position to the ON/RUN position, and also press the brake pedal. Otherwise, damage to the shift lever could result. • DO NOT race the engine when shifting from PARK or NEUTRAL into another gear range, as this can damage the drivetrain.
STARTING AND OPERATING 213 CAUTION! Towing the vehicle, coasting, or driving for any other reason with the transmission in NEUTRAL can result in severe transmission damage. Refer to “Recreational Towing” in “Starting And Operating” and “Towing A Disabled Vehicle” in What To Do In Emergencies” for further information. while towing heavy trailers), use the AutoStick威 mode (described below) to select a lower gear range.
214 STARTING AND OPERATING PARK, REVERSE, and NEUTRAL will continue to operate. Limp Home Mode allows the vehicle to be driven to an authorized dealer for service without damaging the transmission. NOTE: Even if the transmission can be reset, we recommend that you visit your authorized dealer at your earliest possible convenience. Your authorized dealer has diagnostic equipment to determine if the problem could recur.
STARTING AND OPERATING 215 into a higher gear if the engine speed is too low. An Operation audible beep will sound if an inappropriate gear is When the shift lever is in the AutoStick威 position (to the selected. left of the Drive position), it can be moved forward and rearward. This allows the driver to manually select the • When coming to a stop, the transmission will downtransmission gear being used. Moving the shift lever shift through the gears based on vehicle speed.
216 STARTING AND OPERATING • If a downshift would cause the engine to over-speed, DRIVING ON SLIPPERY SURFACES that shift will not occur until it is safe for the engine. Acceleration An audible beep will sound if an inappropriate gear is Rapid acceleration on snow covered, wet, or other slipselected. pery surfaces may cause the driving wheels to pull • The transmission will automatically upshift when nec- erratically to the right or left. This phenomenon occurs essary to prevent engine over-speed.
STARTING AND OPERATING 217 Traction When driving on wet or slushy roads, it is possible for a wedge of water to build up between the tire and road surface. This is known as hydroplaning and may cause partial or complete loss of vehicle control and stopping ability. To reduce this possibility, the following precautions should be observed: 1. Slow down during rainstorms or when the roads are slushy. 2. Slow down if the road has standing water or puddles. 3.
218 STARTING AND OPERATING Shallow Standing Water Although your vehicle is capable of driving through shallow standing water, consider the following Caution and Warning before doing so. CAUTION! • Always check the depth of the standing water before driving through it. Never drive through standing water that is deeper than the bottom of the tire rims mounted on the vehicle.
STARTING AND OPERATING 219 WARNING! • Driving through standing water limits your vehicle’s traction capabilities. Do not exceed 5 mph (8 km/h) when driving through standing water. • Driving through standing water limits your vehicle’s braking capabilities, which increases stopping distances. Therefore, after driving through standing water, drive slowly and lightly press on the brake pedal several times to dry the brakes.
220 STARTING AND OPERATING WARNING! Continued operation with reduced or no power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible. PARKING BRAKE Before leaving the vehicle, make sure that the parking brake is fully applied. Also, be certain to leave manual transmission in REVERSE or first gear. The parking brake lever is located in the center console.
STARTING AND OPERATING 221 from the curb on an uphill grade. The parking brake should always be applied whenever the driver is not in the vehicle. WARNING! • Never leave children alone in a vehicle, or with access to an unlocked vehicle. • Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal or the shift lever.
222 STARTING AND OPERATING SPORT MODE Manual Transmission – If Equipped The Sport mode increases steering feedback to the driver with slight increases in effort and throttle pedal-to-engine response. This driving mode is useful while driving on twisty roads where more steering precision is desired in spirited cornering. 1. To activate the Sport mode, press the SPORT button. SPORT Button Once activated, a SPORT message will be displayed in the instrument cluster. 2.
STARTING AND OPERATING 223 Automatic Transmission – If Equipped The Sport mode increases steering feedback to the driver with slight increase in effort and changes the transmission shift schedules for more aggressive shifting. This driving mode is useful while driving on twisty roads where more steering precision is desired in spirited cornering. 1. To activate the Sport mode, press the SPORT button. 5 SPORT Button Once activated, a SPORT message will be displayed in the instrument cluster. 2.
224 STARTING AND OPERATING BRAKE SYSTEM In the event power assist is lost for any reason (for example; repeated brake applications with the engine off), the brakes will still function. The effort required to brake the vehicle will be significantly more than that required with the power system operating. If either the front or rear hydraulic system loses normal capability, the remaining system will still function with some loss of braking effectiveness.
STARTING AND OPERATING 225 WARNING! WARNING! (Continued) • Pumping the Anti-Lock Brakes will diminish their effectiveness and may lead to a collision. Pumping makes the stopping distance longer. Just press firmly on your brake pedal when you need to slow down or stop.
226 STARTING AND OPERATING reduce braking distances. The BAS complements the Anti-Lock Brake System (ABS). Applying the brakes very quickly results in the best BAS assistance. To receive the benefit of the system, you must apply continuous braking pressure during the stopping sequence (do not “pump” the brakes). Do not reduce brake pedal pressure Anti-Lock Brake System (ABS) unless braking is no longer desired.
STARTING AND OPERATING 227 WARNING! (Continued) • The BAS cannot prevent collisions, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. • The capabilities of a BAS-equipped vehicle must never be exploited in a reckless or dangerous manner which could jeopardize the user’s safety or the safety of others. Traction Control System (TCS) This system monitors the amount of wheel spin of each of the driven wheels.
228 STARTING AND OPERATING HSA Activation Criteria Disabling/Enabling HSA The following criteria must be met in order for HSA to If you wish to turn the HSA system on or off, it can be activate: done using the Customer Programmable Features in the Electronic Vehicle Information Center (EVIC). Refer to • Vehicle must be stopped. “Electronic Vehicle Information Center (EVIC)” in “Un• Vehicle must be on a 2.
STARTING AND OPERATING 229 ESC applies the brake of the appropriate wheel to assist in counteracting the oversteer or understeer condition. • Oversteer - when the vehicle is turning more than appropriate for the steering wheel position. • Understeer - when the vehicle is turning less than appropriate for the steering wheel position.
230 STARTING AND OPERATING WARNING! The Electronic Stability Control (ESC) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. ESC cannot prevent accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. Only a safe, attentive, and skillful driver can prevent accidents.
STARTING AND OPERATING 231 To turn ESC on again, momentarily press the switch ESC Activation/Malfunction Indicator Light And again. This will restore the normal ESC On mode of ESC OFF Indicator Light The ESC Activation/Malfunction Indicator operation. Light in the instrument cluster will come on NOTE: To improve the vehicle’s traction when driving when the ignition switch is turned to the MAR with snow chains, or starting off in deep snow, sand or (ACC/ON/RUN) position for four seconds.
232 STARTING AND OPERATING Malfunction Indicator Light begins to flash during accel- TIRE SAFETY INFORMATION eration, ease up on the accelerator and apply as little Tire Markings throttle as possible. Be sure to adapt your speed and driving to the prevailing road conditions. NOTE: • The ESC Activation/Malfunction Indicator Light and the ESC OFF Indicator Light come on momentarily each time the ignition switch is turned ON.
STARTING AND OPERATING 233 NOTE: • P (Passenger) - Metric tire sizing is based on U.S. design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designa• tion. Example: P215/65R15 95H. tires is the same as for P-Metric tires except for the letters “LT” that are molded into the sidewall preceding the size designation. Example: LT235/85R16. Temporary spare tires are high-pressure compact spares designed for temporary emergency use only.
234 STARTING AND OPERATING Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ⴖ....blank....ⴖ = Passenger car tire based on European design standards LT = Light truck tire based on U.S. design standards T or S = Temporary spare tire 31 = Overall diameter in inches (in) 215 = Section width in millimeters (mm) 65 = Aspect ratio in percent (%) — Ratio of section height to section width of tire 10.
STARTING AND OPERATING 235 EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions — The maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions (i.e.
236 STARTING AND OPERATING Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however, the date code may only be on one side. Tires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is not found on the outboard side, then you will find it on the inboard side of the tire.
STARTING AND OPERATING 237 Tire Terminology And Definitions Term B-Pillar Cold Tire Pressure Maximum Inflation Pressure Recommended Inflation Pressure Tire Placard Definition The vehicle B-Pillar is a structural member of the body located between the front and rear door (of a four-door vehicle) running from the sill to the roof. Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least 3 hours, or driven less than 1 mile (1.
238 STARTING AND OPERATING Tire Loading And Tire Pressure Tire And Loading Information Placard Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar.
STARTING AND OPERATING 239 Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pressures specified on the Tire and Loading Information placard. Steps For Determining Correct Load Limit 1.
240 STARTING AND OPERATING 5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. of your vehicle with varying seating configurations and number and size of occupants. This table is for illustration purposes only and may not be accurate for the seating and load carry capacity of your vehicle. 6.
STARTING AND OPERATING 241 5
242 STARTING AND OPERATING WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMATION Tire Pressure Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle.
STARTING AND OPERATING 243 WARNING! (Continued) • Unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recommended cold tire inflation pressure. Tire Inflation Pressures The proper cold tire inflation pressure is listed on the driver’s side B-Pillar. The pressure should be checked and adjusted as well as inspected for signs of tire wear or visible damage, at least once a month.
244 STARTING AND OPERATING Inflation pressures specified on the placard are always cold tire inflation pressure. Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after a three hour period. The cold tire inflation pressure must not exceed the maximum inflation pressure molded into the tire sidewall.
STARTING AND OPERATING 245 WARNING! High speed driving with your vehicle under maximum load is dangerous. The added strain on your tires could cause them to fail. You could have a serious accident. Do not drive a vehicle loaded to the maximum capacity at continuous speeds above 75 mph (120 km/h). Radial-Ply Tires WARNING! Combining radial-ply tires with other types of tires on your vehicle will cause your vehicle to handle poorly. The instability could cause an accident.
246 STARTING AND OPERATING WARNING! (Continued) • Temporary use spare tires have limited tread life. When the tread is worn to the tread wear indicators, the temporary use spare tire needs to be replaced. • Be sure to follow the warnings which apply to your spare. Failure to do so could result in spare tire failure and loss of vehicle control. CAUTION! Because of the reduced ground clearance, do not take your vehicle through an automatic car wash with the compact spare installed.
STARTING AND OPERATING 247 WARNING! Fast spinning tires can be dangerous. Forces generated by excessive wheel speeds may cause tire damage or failure. A tire could explode and injure someone. Do not spin your vehicle’s wheels faster than 30 mph (48 km/h) or for more than 30 seconds continuously when you are stuck, and do not let anyone near a spinning wheel, no matter what the speed.
248 STARTING AND OPERATING Life Of Tire Replacement Tires The service life of a tire is dependent upon varying The tires on your new vehicle provide a balance of many factors including, but not limited to: characteristics. They should be inspected regularly for wear and correct cold tire inflation pressure. The manu• Driving style facturer strongly recommends that you use tires equiva• Tire pressure lent to the originals in size, quality and performance when replacement is needed.
STARTING AND OPERATING 249 WARNING! WARNING! (Continued) • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change suspension dimensions and performance characteristics, resulting in changes to steering, handling, and braking of your vehicle. This can cause unpredictable handling and stress to steering and suspension components. You could lose control and have an accident resulting in serious injury or death.
250 STARTING AND OPERATING CAUTION! CAUTION! (Continued) To avoid damage to your vehicle or tires, observe the following precautions: • Use Security Chain Company (SCC) SCC Z6 low profile or equivalent chains on 185/55R15 tires only. • Because of restricted chain clearance between tires and other suspension components, it is important that only chains in good condition are used. Broken chains can cause serious damage. Stop the vehicle immediately if noise occurs that could indicate chain breakage.
STARTING AND OPERATING 251 The suggested rotation method is shown in the following TIRE ROTATION RECOMMENDATIONS The tires on the front and rear of your vehicle operate at diagram. different loads and perform different steering, driving, and braking functions. For these reasons, they wear at unequal rates and tend to develop irregular wear patterns. These effects can be reduced by timely rotation of tires.
252 STARTING AND OPERATING TIRE PRESSURE MONITORING SYSTEM (TPMS) The Tire Pressure Monitor System (TPMS) will warn the driver of a low tire pressure based on the vehicle recommended cold tire pressure. The TPMS will warn the driver of a low tire pressure if the tire pressure falls below the low pressure warning limit for any reason, including low temperature effects, or natural pressure loss through the tire. The tire pressure will vary with temperature by about 1 psi (6.9 kPa) for every 12° F (6.5° C).
STARTING AND OPERATING 253 For example, your vehicle may have a recommended cold (parked for more than three hours) tire pressure of 30 psi (207 kPa). If the ambient temperature is 68° F (20° C) and the measured tire pressure is 27 psi (186 kPa), a temperature drop to 20° F (-7° C) will decrease the tire pressure to approximately 26 psi (179 kPa). This tire pressure is sufficiently low enough to turn on the Tire Pressure Monitoring Telltale Light.
254 STARTING AND OPERATING NOTE: • Seasonal temperature changes will affect tire pressure, • The TPMS is not intended to replace normal tire care and the TPMS will monitor the actual tire pressure in and maintenance, or to provide warning of a tire the tire. failure or condition. Base System • The TPMS should not be used as a tire pressure gauge This is the TPMS warning indicator located in the while adjusting your tire pressure. instrument cluster.
STARTING AND OPERATING 255 • Four Tire Pressure Monitoring Sensors • Tire Pressure Monitoring Telltale Light Tire Pressure Monitoring Low Pressure Warnings The Tire Pressure Monitoring Telltale Light will illuminate in the instrument cluster, an audible chime will be activated, and the “Check Tire Pressure” text message will display when one or more of the four active road tire pressures are low.
256 STARTING AND OPERATING 4. For each subsequent ignition key cycle, a chime will sound and the Tire Pressure Monitoring Telltale Light NOTE: Your vehicle is equipped with a compact spare will flash on and off for 75 seconds and then remain on wheel and tire assembly. solid. 1. The compact spare tire does not have a tire pressure 5. Once you repair or replace the original road tire and monitoring sensor.
STARTING AND OPERATING 257 • This device must accept any interference received, Light spark knock at low engine speeds is not harmful to including interference that may cause undesired your engine. However, continued heavy spark knock at operation. high speeds can cause damage and immediate service is required. The tire pressure sensors are covered under one of the following licenses: Poor quality gasoline can cause problems such as hard starting, stalling and hesitations.
258 STARTING AND OPERATING The manufacturer supports the use of reformulated gasoline. Properly blended reformulated gasoline will provide excellent performance and durability of engine and fuel system components. Problems that result from using methanol/gasoline blends are not the responsibility of the manufacturer. While MTBE is an oxygenate made from Methanol, it does not have the negative effects of Methanol.
STARTING AND OPERATING 259 To recover from a Non-FFV vehicle inadvertently fueled system performance in some vehicles. The manufacturer recommends using gasoline without MMT. Since the once with E-85 perform the following: MMT content of gasoline may not be indicated on the • drain the fuel tank pump, you should ask your gasoline retailer whether or not their gasoline contains MMT.
260 STARTING AND OPERATING Fuel System Cautions CAUTION! (Continued) CAUTION! Follow these guidelines to maintain your vehicle’s performance: • The use of leaded gas is prohibited by Federal law. Using leaded gasoline can impair engine performance and damage the emission control system. • An out-of-tune engine, or certain fuel or ignition malfunctions, can cause the catalytic converter to overheat.
STARTING AND OPERATING 261 Carbon Monoxide Warnings WARNING! (Continued) WARNING! Carbon monoxide (CO) in exhaust gases is deadly. Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas which can kill. Never run the engine in a closed area, such as a garage, and never sit in a parked vehicle with the engine running for an extended period of time.
262 STARTING AND OPERATING ADDING FUEL CAUTION! Fuel Filler Cap (Gas Cap) The gas cap is located on the passenger side of the vehicle. If the gas cap is lost or damaged, be sure the replacement cap is the correct one for this vehicle. Fuel Filler Cap • Damage to the fuel system or emission control system could result from using an improper fuel cap (gas cap). A poorly fitting cap could let impurities into the fuel system.
STARTING AND OPERATING 263 WARNING! • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank is being filled. • Never add fuel when the engine is running. It may cause the MIL to turn on and could cause a fire. • A fire may result if gasoline is pumped into a portable container that is inside of a vehicle. You could be burned. Always place gas containers on the ground while filling. • If the gas cap is not tightened properly, the MIL will come on.
264 STARTING AND OPERATING RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.
WHAT TO DO IN EMERGENCIES CONTENTS 䡵 Hazard Warning Flashers . . . . . . . . . . . . . . . . 267 ▫ Spare Tire Removal . . . . . . . . . . . . . . . . . . . 280 䡵 If Your Engine Overheats . . . . . . . . . . . . . . . . 267 ▫ Preparations For Jacking . . . . . . . . . . . . . . . 283 䡵 TIREFIT Kit . . . . . . . . . . . . . . . . . . . . . . . . . 268 ▫ Jacking Instructions . . . . . . . . . . . . . . . . . . . 283 ▫ TIREFIT Storage . . . . . . . . . . . . . . . . . . . . . 269 ▫ Spare Tire Stowage . .
266 WHAT TO DO IN EMERGENCIES 䡵 Towing A Disabled Vehicle . . . . . . . . . . . . . . . 295 ▫ With Ignition Key . . . . . . . . . . . . . . . . . . . . 295 ▫ Without The Ignition Key . . . . . . . . . . . . . . 296 䡵 Enhanced Accident Response System . . . . . . .
WHAT TO DO IN EMERGENCIES 267 HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located on the In any of the following situations, you can reduce the instrument panel below the radio. potential for overheating by taking the appropriate action. Press the switch to turn on the Hazard Warning flashers. When the switch is activated, all direc- • On the highways — slow down.
268 WHAT TO DO IN EMERGENCIES CAUTION! WARNING! Driving with a hot cooling system could damage your vehicle. If the pointer rises to the H (red) mark, the instrument cluster will sound a chime. When safe, pull over and stop the vehicle with the engine at idle. Turn off the air conditioning and wait until the pointer drops back into the normal range. If the pointer remains on the H (red) mark for more than a minute, turn the engine off immediately and call for service.
WHAT TO DO IN EMERGENCIES 269 TIREFIT Storage The TIREFIT kit is located under the front driver’s seat. TIREFIT Kit Components And Operation 4. Power Button 5. Mode Select Knob 6. Sealant Hose (Clear) 7. Air Pump Hose (Black) 8. Power Plug Using The Mode Select Knob And Hoses Your TIREFIT kit is equipped with the following symbols to indicate the air or sealant mode. Selecting Air Mode Turn the Mode Select Knob (5) to this position for air pump operation only.
270 WHAT TO DO IN EMERGENCIES Selecting Sealant Mode TIREFIT Usage Precautions Turn the Mode Select Knob (5) to this • Replace the TIREFIT Sealant Bottle (1) and Sealant position to inject the TIREFIT Sealant Hose (6) prior to the expiration date (printed on the and to inflate the tire. Use the Sealant bottle label) to assure optimum operation of the sysHose (clear hose) (6) when selecting tem. Refer to “Sealing a Tire with TIREFIT” section (F) this mode. “Sealant Bottle and Hose Replacement”.
WHAT TO DO IN EMERGENCIES 271 • For optimum performance, make sure the valve stem on the wheel is free of debris before connecting the TIREFIT kit. • You can use the TIREFIT air pump to inflate bicycle tires. The kit also comes with two needles, located in the Accessory Storage Compartment (on the bottom of the air pump) for inflating sport balls, rafts, or similar inflatable items.
272 WHAT TO DO IN EMERGENCIES WARNING! (Continued) WARNING! (Continued) − If you are unsure of the condition of the tire or the wheel. • Keep TIREFIT away from open flames or heat source. • A loose TIREFIT kit thrown forward in a collision or hard stop could endanger the occupants of the vehicle. Always stow the TIREFIT kit in the place provided. Failure to follow these warnings can result in injuries that are serious or fatal to you, your passengers, and others around you.
WHAT TO DO IN EMERGENCIES 273 Sealing A Tire With TIREFIT (B) Setting Up To Use TIREFIT: (A) Whenever You Stop To Use TIREFIT: 1. Turn the Mode Select Knob (5) to the Sealant Mode position. 1. Pull over to a safe location and turn on the vehicle’s Hazard Warning flashers. 2. Uncoil the Sealant Hose (6) and then remove the cap from the fitting at the end of the hose. 2. Verify that the valve stem (on the wheel with the deflated tire) is in a position that is near to the ground. 3.
274 WHAT TO DO IN EMERGENCIES Sealant Hose (6) to the valve stem. Check that the Mode Select Knob (5) is in the Sealant Mode position and not Air Mode. Press the Power Button (4) to turn On the • Always start the engine before turning ON the TIRETIREFIT kit. FIT kit. 2. Connect the Power Plug (8) to a different 12 Volt NOTE: Manual transmission vehicles must have the power outlet in your vehicle or another vehicle, if availparking brake engaged and the shift lever in NEUTRAL. able.
WHAT TO DO IN EMERGENCIES 275 1. Continue to operate the pump until sealant is no longer flowing through hose (typically takes 30 - 70 seconds). As the sealant flows through the Sealant Hose (6), the Pressure Gauge (3) can read as high as 70 psi (5 Bar). The Pressure Gauge (3) will decrease quickly from approximately 70 psi (5 Bar) to the actual tire pressure when the Sealant Bottle (1) is empty.
276 WHAT TO DO IN EMERGENCIES CAUTION! WARNING! • The metal end fitting from Power Plug (8) may get hot after use, so it should be handled carefully. • Failure to reinstall the cap on the fitting at the end of the Sealant Hose (6) can result in sealant contacting your skin, clothing, and the vehicle’s interior. It can also result in sealant contacting internal TIREFIT kit components which may cause permanent damage to the kit. TIREFIT is not a permanent flat tire repair.
WHAT TO DO IN EMERGENCIES 277 3. Uncoil the Air Pump Hose (7) (black in color) and 2. Disconnect the TIREFIT kit from the valve stem, screw the fitting at the end of hose (7) onto the valve reinstall the cap on the valve stem and unplug from 12 stem. Volt outlet. 4. Check the pressure in the tire by reading the Pressure 3. Place the TIREFIT kit in its proper storage area in the Gauge (3). vehicle. If tire pressure is less than 19 psi (1.3 Bar) , the tire is too 4.
278 WHAT TO DO IN EMERGENCIES 2. Locate the round Sealant Bottle release button in the JACKING AND TIRE CHANGING — IF EQUIPPED recessed area under the sealant bottle. 3. Press the Sealant Bottle release button. The Sealant Bottle (1) will pop up. Remove the bottle and dispose of it accordingly. 4. Clean any remaining sealant from the TIREFIT housing. 5. Position the new Sealant Bottle (1) in the housing so that the Sealant Hose (6) aligns with the hose slot in the front of the housing.
WHAT TO DO IN EMERGENCIES 279 WARNING! (Continued) • The jack is designed to be used as a tool for changing tires only. The jack should not be used to lift the vehicle for service purposes. The vehicle should be jacked on a firm level surface only. Avoid ice or slippery areas. Jack Location The jack and jack-handle are stowed in a bag under the front driver’s seat.
280 WHAT TO DO IN EMERGENCIES 2. Fit the wrench tool over the drive nut. Use the wrench Spare Tire Removal The spare tire is stowed to the underbody below the to rotate the nut counterclockwise until the spare is on cargo area. the ground with enough slack in the cable to allow you to pull the tire out from under the vehicle. 1. Remove the plug located in the rear cargo area.
WHAT TO DO IN EMERGENCIES 281 CAUTION! The winch mechanism is designed for use with the jack wrench tool only. Use of an air wrench or other power tools is not recommended and they can damage the winch. 3. Pull the spare tire out from under the vehicle.
282 WHAT TO DO IN EMERGENCIES 4. When the spare is clear, remove the knob or plastic 5. Tilt the retainer at the end of the cable and pull it molded nut by rotating it counter-clockwise. through the center of the wheel.
WHAT TO DO IN EMERGENCIES 283 Preparations For Jacking 1. Park the vehicle on a firm level surface, avoiding ice or slippery areas. WARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic, pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. 2. Turn on the Hazard Warning flashers. 3. Set the parking brake. 4. Place the shift lever in PARK (automatic transmission) or REVERSE (manual transmission). 5.
284 WHAT TO DO IN EMERGENCIES WARNING! (Continued) WARNING! (Continued) • Turn on the Hazard Warning flashers. • Block the wheel diagonally opposite the wheel to be raised. • Set the parking brake firmly and set an automatic transmission in PARK; a manual transmission in REVERSE. • Never start or run the engine with the vehicle on a jack. • Do not let anyone sit in the vehicle when it is on a jack. • Do not get under the vehicle when it is on a jack.
WHAT TO DO IN EMERGENCIES 285 CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in the Jacking Instructions for this vehicle. 1. Remove the scissors jack and tool bag from under the driver’s seat. 2. Loosen, but do not remove, the wheel bolts by turning them to the left one turn while the wheel is still on the ground. NOTE: There are front and rear jacking locations on each side of the body (as indicated by the triangular lift point symbol on the sill molding).
286 WHAT TO DO IN EMERGENCIES positioned, turn the jack screw to the right until the jack head is properly engaged with the lift area closest to the wheel to be changed. Rear Jacking Location Do not raise the vehicle until you are sure the jack is securely engaged. 3. Turn the jack screw to the left until the jack can be placed under the jacking location.
WHAT TO DO IN EMERGENCIES 287 WARNING! WARNING! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. To avoid the risk of forcing the vehicle off the jack, do not fully tighten the wheel bolts until the vehicle has been lowered. Failure to follow this warning may result in personal injury. 4. Using the swivel wrench, raise the vehicle by turning the jack screw to the right.
288 WHAT TO DO IN EMERGENCIES NOTE: The wheel cover is held on the wheel by the wheel bolts. When reinstalling the original wheel, properly align the wheel cover to the valve stem, place the wheel cover onto the wheel, then install the wheel bolts. 6. Install the spare wheel and wheel bolts with the cone shaped end of the bolts toward the wheel. Lightly tighten the bolts. To avoid the risk of forcing the vehicle off the jack, do not tighten the bolts fully until the vehicle has been lowered. 7.
WHAT TO DO IN EMERGENCIES 289 WARNING! CAUTION! A loose tire thrown forward in a collision or hard stop could injure the occupants in the vehicle. Have the deflated (flat) tire repaired or replaced immediately. The winch mechanism is designed for use with the jack wrench extension tool only. Use of air wrench or power tool may damage the winch. JUMP-STARTING PROCEDURE 11. Check the spare tire pressure as soon as possible.
290 WHAT TO DO IN EMERGENCIES WARNING! Do not attempt jump-starting if the battery is frozen. It could rupture or explode and cause personal injury. CAUTION! Do not use a portable battery booster pack or any other booster source with a system voltage greater than 12 Volts or damage to the battery, starter motor, alternator or electrical system may occur. Preparations For Jump-Start The battery in your vehicle is located on the left side of the engine compartment.
WHAT TO DO IN EMERGENCIES 291 WARNING! • Take care to avoid the radiator cooling fan whenever the hood is raised. It can start anytime the ignition switch is ON. You can be injured by moving fan blades. • Remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact. You could be seriously injured. • Batteries contain sulfuric acid that can burn your skin or eyes and generate hydrogen gas which is flammable and explosive.
292 WHAT TO DO IN EMERGENCIES CAUTION! WARNING! Failure to follow these procedures could result in damage to the charging system of the booster vehicle or the discharged vehicle. Do not connect the cable to the negative post (-) of the discharged battery. The resulting electrical spark could cause the battery to explode and could result in personal injury. 1. Connect the positive (+) end of the jumper cable to the positive (+) post of the discharged vehicle. 5.
WHAT TO DO IN EMERGENCIES 293 8. Disconnect the opposite end of the positive (+) jumper FREEING A STUCK VEHICLE If your vehicle becomes stuck in mud, sand or snow, it cable from the positive (+) post of the booster battery. can often be moved by a rocking motion. Turn your 9. Disconnect the positive (+) end of the jumper cable steering wheel right and left to clear the area around the from the positive (+) post of the discharged vehicle. front wheels.
294 WHAT TO DO IN EMERGENCIES NOTE: If your vehicle is equipped with Traction Control or Electronic Stability Control (ESC), turn the system OFF before attempting to “rock” the vehicle. CAUTION! • When “rocking” a stuck vehicle by moving between DRIVE (automatic transmission) or 1st gear (manual transmission) and REVERSE, do not spin the wheels faster than 15 mph (24 km/h), or drivetrain damage may result.
WHAT TO DO IN EMERGENCIES 295 6. Move the shift lever into the NEUTRAL position. 7. The vehicle may then be started in NEUTRAL. 8. Reinstall the shift lever override access cover. TOWING A DISABLED VEHICLE With Ignition Key Automatic Transmission • Vehicle can be towed with the front wheels elevated. Shift Lever Override Access Cover • Vehicle can be towed on a flatbed truck (all wheels off the ground). 3. Turn the ignition switch to the ON/RUN position without starting the engine. CAUTION! 4.
296 WHAT TO DO IN EMERGENCIES Manual Transmission • Vehicle can be flat towed (all four wheels on the ground) with the transmission in NEUTRAL. • Vehicle can be towed with the front wheels elevated. • Vehicle can be towed on a flatbed truck (all wheels off the ground). CAUTION! (Continued) • Do not attempt to use sling-type equipment when towing. When securing the vehicle to a flatbed truck, do not attach to front or rear suspension components. Damage to your vehicle may result from improper towing.
WHAT TO DO IN EMERGENCIES 297 override the system. The ignition key must be in the • Turn on the interior lights, which remain on as long as ON/RUN position to use the override lever. the battery has power or until the ignition key is removed. CAUTION! Failure to follow these towing methods can cause severe transmission damage. Such damage is not covered by the New Vehicle Limited Warranty. • Unlock the doors automatically.
298 WHAT TO DO IN EMERGENCIES Customer Action 1. Turn ignition OFF. (Turn Signal Switch Must be placed in Neutral State). 2. Turn ignition ON. 3. Turn Right Turn Signal Switch ON. 4. Turn Left Turn Signal Switch ON. 5. Turn Right Turn Signal Switch ON. 6. Turn Left Turn Signal Switch ON. Customer Will See Left Turn Light is OFF. Right Turn Light BLINKS. Right Turn Light is ON SOLID. Left Turn Light BLINKS. Left Turn Light is ON SOLID. Right Turn Light BLINKS. Right Turn Light is ON SOLID.
MAINTAINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment — 1.4L . . . . . . . . . . . . . 301 ▫ Engine Air Cleaner Filter . . . . . . . . . . . . . . . 308 䡵 Onboard Diagnostic System – OBD II . . . . . . . 302 ▫ Maintenance-Free Battery . . . . . . . . . . . . . . 309 䡵 Emissions Inspection And Maintenance Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302 ▫ Air Conditioner Maintenance . . . . . . . . . . . . 311 䡵 Replacement Parts . . . . . . . . . . . . . . . . . . . . .
300 MAINTAINING YOUR VEHICLE ▫ Manual Transmission – If Equipped . . . . . . . 325 ▫ Automatic Transmission – If Equipped . . . . . 325 ▫ Appearance Care And Protection From Corrosion . . . . . . . . . . . . . . . . . . . . . . . . . . 326 ▫ Convertible Top Care – If Equipped . . . . . . . 332 䡵 Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 334 ▫ Interior Fuses . . . . . . . . . . . . . . . . . . . . . . . 334 ▫ Underhood Fuses . . . . . . . . . . . . . . . . . . . .
MAINTAINING YOUR VEHICLE 301 ENGINE COMPARTMENT — 1.
302 MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM – OBD II Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emissions well within current government regulations.
MAINTAINING YOUR VEHICLE 303 For states that require an Inspection and Maintenance (I/M), this check verifies the “Malfunction Indicator Light (MIL)” is functioning and is not on when the engine is running, and that the OBD II system is ready for testing. 2. If you crank or start the engine, you will have to start this test over. 3. As soon as you turn the ignition switch to the ON position, you will see the MIL symbol come on as part of a normal bulb check. Normally, the OBD II system will be ready.
304 MAINTAINING YOUR VEHICLE If your OBD II system is not ready, you should see your authorized dealer or repair facility. If your vehicle was recently serviced or had a battery failure or replacement, you may need to do nothing more than drive your vehicle as you normally would in order for your OBD II system to update. A recheck with the above test routine may then indicate that the system is now ready.
MAINTAINING YOUR VEHICLE 305 WARNING! CAUTION! You can be badly injured working on or around a motor vehicle. Only do service work for which you have the knowledge and the proper equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic. • Failure to properly maintain your vehicle or perform repairs and service when necessary could result in more costly repairs, damage to other components or negatively impact vehicle performance.
306 MAINTAINING YOUR VEHICLE Engine Oil CAUTION! Checking Oil Level Do not overfill the engine with oil. Overfilling the To assure proper engine lubrication, the engine oil must engine with oil will cause oil aeration, which can be maintained at the correct level. Check the oil level at lead to loss of oil pressure and an increase in oil regular intervals, such as every fuel stop. The best time to temperature.
MAINTAINING YOUR VEHICLE 307 Engine Oil Selection For best performance and maximum protection for all engines under all types of operating conditions, the manufacturer recommends engine oils that are API Certified and meet the requirements of Chrysler Material Standard MS-6395. American Petroleum Institute (API) Engine Oil Identification Symbol This symbol means that the oil has been certified by the American Petroleum Institute (API). The manufacturer only recommends API Certified engine oils.
308 MAINTAINING YOUR VEHICLE engine oil filler cap location, refer to “Engine Compart- station, or governmental agency for advice on how and ment” in “Maintaining Your Vehicle” for further where used oil and oil filters can be safely discarded in your area. information. Synthetic Engine Oils You may use synthetic engine oils provided the recommended oil quality requirements are met, and the recommended maintenance intervals for oil and filter changes are followed.
MAINTAINING YOUR VEHICLE 309 WARNING! The air induction system (air cleaner, hoses, etc) can provide a measure of protection in the case of engine backfire. Do not remove the air induction system (air cleaner, hoses, etc.) unless such removal is necessary for repair or maintenance. Make sure that no one is near the engine compartment before starting the vehicle with the air induction system (air cleaner, hoses, etc.) removed. Failure to do so can result in serious personal injury.
310 MAINTAINING YOUR VEHICLE WARNING! (Continued) CAUTION! • Battery gas is flammable and explosive. Keep flame or sparks away from the battery. Do not use a booster battery or any other booster source with an output greater than 12 Volts. Do not allow cable clamps to touch each other. • Battery posts, terminals, and related accessories contain lead and lead compounds. Wash hands after handling.
MAINTAINING YOUR VEHICLE 311 Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test. Drive belt tension should also be checked at this time. CAUTION! Do not use chemical flushes in your air conditioning system as the chemicals can damage your air conditioning components.
312 MAINTAINING YOUR VEHICLE Protection Agency and is an ozone-saving product. However, the manufacturer recommends that air conditioning service be performed by authorized dealers or other service facilities using recovery and recycling equipment. hood latching components to ensure proper function. When performing other underhood services, the hood latch, release mechanism and safety catch should be cleaned and lubricated.
MAINTAINING YOUR VEHICLE 313 from a dry windshield. Avoid using the wiper blades to remove frost or ice from the windshield. Make sure that they are not frozen to the glass before turning them on to avoid damaging the blade. Keep the blade rubber out of contact with petroleum products such as engine oil, gasoline, etc. NOTE: Life expectancy of wiper blades varies depending on geographical area and frequency of use. Poor performance of blades may be present with chattering, marks, water lines or wet spots.
314 MAINTAINING YOUR VEHICLE 3. Grab the bottom of the wiper blade and rotate it 4. Install the wiper blade pivot pin into the wiper blade forward to unsnap the blade pivot pin from the wiper holder at the end of the wiper arm, and firmly press the blade holder. wiper blade until it snaps into place. 5. Lower the wiper blade and snap the pivot cap into place.
MAINTAINING YOUR VEHICLE 315 Exhaust System The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system. If you notice a change in the sound of the exhaust system; or if the exhaust fumes can be detected inside the vehicle; or when the underside or rear of the vehicle is damaged; have an authorized technician inspect the complete exhaust system and adjacent body areas for broken, damaged, deteriorated, or mispositioned parts.
316 MAINTAINING YOUR VEHICLE CAUTION! • The catalytic converter requires the use of unleaded fuel only. Leaded gasoline will destroy the effectiveness of the catalyst as an emissions control device and may seriously reduce engine performance and cause serious damage to the engine. • Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition.
MAINTAINING YOUR VEHICLE 317 To minimize the possibility of catalytic converter dam- Cooling System age: • Do not shut off the engine or interrupt the ignition, when the transmission is in gear and the vehicle is in motion. • Do not try to start the engine by pushing or towing the vehicle. • Do not idle the engine with any spark plug wires disconnected or removed, such as when diagnostic testing, or for prolonged periods during very rough idle or malfunctioning operating conditions.
318 MAINTAINING YOUR VEHICLE Coolant Checks Selection Of Coolant Check engine coolant (antifreeze) protection every Refer to “Fluids, Lubricants, and Genuine Parts” in 12 months (before the onset of freezing weather, where “Maintaining Your Vehicle” for further information. applicable). If the engine coolant (antifreeze) is dirty or CAUTION! rusty in appearance, the system should be drained, flushed and refilled with fresh engine coolant (anti• Mixing of engine coolant (antifreeze) other than freeze).
MAINTAINING YOUR VEHICLE 319 CAUTION! (Continued) • Do not use water alone or alcohol-based engine coolant (antifreeze) products. Do not use additional rust inhibitors or antirust products, as they may not be compatible with the radiator engine coolant and may plug the radiator. • This vehicle has not been designed for use with propylene glycol-based engine coolant (antifreeze). Use of propylene glycol-based engine coolant (antifreeze) is not recommended.
320 MAINTAINING YOUR VEHICLE Please note that it is the owner’s responsibility to maintain the proper level of protection against freezing according to the temperatures occurring in the area where the vehicle is operated. NOTE: Mixing engine coolant (antifreeze) types is not recommended and can result in cooling system damage. Drain, flush, and refill as soon as possible to avoid damage if coolant types are mixed in an emergency.
MAINTAINING YOUR VEHICLE 321 rules for your community. To prevent ingestion by animals or children do not store ethylene glycol-based engine coolant (antifreeze) in open containers or allow it to remain in puddles on the ground. If ingested by a child or pet, seek emergency assistance immediately. Clean up any ground spills immediately. When additional engine coolant (antifreeze) is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill.
322 MAINTAINING YOUR VEHICLE • Check the coolant freeze point in the radiator and in • Do not change the thermostat for Summer or Winter the coolant expansion bottle. If engine coolant (antioperation. If replacement is ever necessary, install freeze) needs to be added, the contents of the coolant ONLY the correct type thermostat. Other designs may expansion bottle must also be protected against freezresult in unsatisfactory engine coolant (antifreeze) pering.
MAINTAINING YOUR VEHICLE 323 Brake Master Cylinder The fluid level in the master cylinder should be checked when performing under hood services, or immediately if the “Brake Warning Light” is on. brake fluid reservoir is low and the brake system does not indicate any leaks or other problems, it may be a result of a leak in the hydraulic clutch release system. See your local authorized dealer for service.
324 MAINTAINING YOUR VEHICLE WARNING! (Continued) WARNING! (Continued) • To avoid contamination from foreign matter or moisture, use only new brake fluid or fluid that has been in a tightly closed container. Keep the master cylinder reservoir cap secured at all times. Brake fluid in a open container absorbs moisture from the air resulting in a lower boiling point. This may cause it to boil unexpectedly during hard or prolonged braking, resulting in sudden brake failure. This could result in a collision.
MAINTAINING YOUR VEHICLE 325 Manual Transmission – If Equipped NOTE: If contaminated with water, the fluid should be changed immediately. Lubricant Selection Use only the manufacturers recommended transmission Automatic Transmission – If Equipped fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in The automatic transmission and differential assembly are “Maintaining Your Vehicle” for further information. contained within a single housing.
326 MAINTAINING YOUR VEHICLE fluid. No chemical flushes should be used in any trans- Fluid Level Check The automatic transmission has no dipstick and is dealer mission; only the approved lubricant may be used. serviced only. Special Additives Automatic Transmission Fluid (ATF) is an engineered Fluid And Filter Changes product and its performance may be impaired by supple- Refer to the “Maintenance Schedule” for the proper mental additives.
MAINTAINING YOUR VEHICLE 327 The following maintenance recommendations will enable Washing you to obtain maximum benefit from the corrosion • Wash your vehicle regularly. Always wash your veresistance built into your vehicle. hicle in the shade using MOPAR威 Car Wash or a mild What Causes Corrosion? car wash soap, and rinse the panels completely with Corrosion is the result of deterioration or removal of clear water. paint and protective coatings from your vehicle.
328 MAINTAINING YOUR VEHICLE CAUTION! • Do not use abrasive or strong cleaning materials such as steel wool or scouring powder, which will scratch metal and painted surfaces. • Use of power washers exceeding 1,200 psi (8 274 kPa) can result in damage or removal of paint and decals. • If you detect any stone chips or scratches in the paint, touch them up immediately. The cost of such repairs is considered the responsibility of the owner.
MAINTAINING YOUR VEHICLE 329 Wheel And Wheel Trim Care • For tough stains, apply MOPAR威 Total Clean or a mild All wheels and wheel trim, especially aluminum and soap solution to a clean, damp cloth and remove the chrome-plated wheels, should be cleaned regularly with stain. Use a fresh, damp towel to remove soap residue. a mild soap and water to prevent corrosion.
330 MAINTAINING YOUR VEHICLE Your leather upholstery can be best preserved by regular cleaning with a damp, soft cloth. Small particles of dirt can act as an abrasive and damage the leather upholstery and should be removed promptly with a damp cloth. Stubborn soils can be removed easily with a soft cloth and MOPAR威 Total Clean or equivalent. Care should be taken to avoid soaking your leather upholstery with any liquid.
MAINTAINING YOUR VEHICLE 331 quarter window equipped with the radio antenna. Do Instrument Panel Bezels not use scrapers or other sharp instruments which may CAUTION! scratch the elements. When cleaning the rearview mirror, spray cleaner on the towel or rag that you are using. Do When installing hanging air fresheners in your venot spray cleaner directly on the mirror. hicle, read the installation instructions carefully.
332 MAINTAINING YOUR VEHICLE Seat Belt Maintenance Do not bleach, dye or clean the seat belts with chemical solvents or abrasive cleaners. This will weaken the fabric. Sun damage can also weaken the fabric. If the seat belts need cleaning, use a mild soap solution or lukewarm water. Do not remove the seat belts from the car to wash them. Dry with a soft cloth. Replace the seat belts if they appear frayed or worn or if the buckles do not work properly.
MAINTAINING YOUR VEHICLE 333 Washing Hand washing is highly recommended. Automatic car washing equipment can damage the top material. If you must use an automatic car wash, soft cloth systems are preferred. CAUTION! Avoid high-pressure car washes, as they can damage the top material. Also, increased water pressure may force water past the weather strips. General Cleaning Careful vacuuming of the top before washing is helpful in removing dust and other foreign particles.
334 MAINTAINING YOUR VEHICLE FUSES Cavity Interior Fuses The interior fuse panel is part of the Body Control Module (BCM) and is located on the driver’s side under the instrument panel. 1 Vehicle Fuse Number F12 F32 2 3 4 F53 F38 F36 5 6 Fuse Panel F43 Mini Fuse Description 7.
MAINTAINING YOUR VEHICLE 335 Cavity 7 8 9 Vehicle Fuse Number F48 F13 F50 F51 10 Mini Fuse Description 20 Amp Yellow 7.5 Amp Brown 7.
336 MAINTAINING YOUR VEHICLE Underhood Fuses The Front Distribution Unit is located on the right side of the engine compartment, next to the battery. To access the fuses, press the release tabs and remove the cover. Front Distribution Unit The ID number of the electrical component corresponding to each fuse can be found on the back of the cover.
MAINTAINING YOUR VEHICLE 337 Cavity Maxi Fuse F08 30 Amp Green F09 F10 F11 F11 F14 F15 F16 Mini Fuse Description Blower Motor 10 Amp Red 10 Amp Red 15 Amp Blue 10 Amp Red 5 Amp Tan Powertrain F17 Horn F18 Powertrain F18 Powertrain (Multiair – If Equipped) High beam (Shutter) Cigar Lighter F19 Transmission F23 15 Amp Blue 7.5 Amp Brown Cavity Maxi Fuse F17 F20 F21 Mini Fuse 25 Amp White 15 Amp Blue 15 Amp Blue 5 Amp Tan 7.
338 MAINTAINING YOUR VEHICLE Cavity Maxi Fuse F24 F30 F82 F84 F85 F87 F90 30 Amp Green Mini Fuse Description 7.5 Amp Stability Control Brown System 15 Amp Fog Lamps Blue Sunroof/ Convertible Top 10 Amp Transmission Red 15 Amp Rear Defroster, Blue Heated Mirrors 5 Amp Tan Lights 5 Amp Tan Heated Mirrors VEHICLE STORAGE If you are leaving your vehicle dormant for more than 21 days, you may want to take these steps to protect your battery. • Disconnect the negative cable from the battery.
MAINTAINING YOUR VEHICLE 339 REPLACEMENT BULBS NOTE: Numbers refer to commercial bulb types that can be purchased from your authorized dealer. Interior Lights Bulb Type Overhead Lamp . . . . . . . . . . . . . . . . . . . . . . . . C5W If a bulb needs to be replaced, visit your authorized Courtesy Lamp . . . . . . . . . . . . . . . . . . . . . . . . W5W dealer or refer to the applicable Service Manual. Exterior Lights Bulb Type Front Low and High Beam Headlamp. . . . . . . . .
340 MAINTAINING YOUR VEHICLE Front Turn Signal, Parking And Daytime Running Lamps 3. Remove the plastic cap from the back of the lamp housing. 1. Turn the steering wheel completely to the left or right. 4. Rotate bulb/socket counter-clockwise. 2. Open the wheel housing access door. 5. Remove the bulb and replace as needed. 6. Install the bulb into socket, and rotate bulb/socket clockwise into lamp locking it in place. 7. Reinstall the plastic cap.
MAINTAINING YOUR VEHICLE 341 Front/Rear Side Marker Lamps Rear Tail, Stop, Backup And Turn Signal Lamps 1. Remove portion of the wheel liner to allow hand 1. Open the liftgate. access to side marker lamp. 2. Remove the two screws and remove the tail lamp 2. Rotate the bulb socket counterclockwise, and remove assembly. the bulb and socket assembly from the housing. 3. Pull the bulb from the socket and insert the replacement bulb. 4.
342 MAINTAINING YOUR VEHICLE 3. Unsnap backplate and separate from the lamp hous- 2. Remove the center high mounted stop lamp assembly. ing. 3. Disconnect the electric connector. 4. Remove the tail, stop, or turn signal bulbs by pushing 4. Press the retaining device and open the bulb holder. them slightly and turning counter-clockwise. 5. Remove the snap-fitted bulb to be replaced and re5. Remove the backup lamp bulb by pulling straight out. place it. 6. Replace lamps as required and reinstall lamp. 6.
MAINTAINING YOUR VEHICLE 343 FLUID CAPACITIES Fuel (Approximate) Engine Oil with Filter 1.4 Liter Engine Cooling System 1.4 Liter Engine (MOPAR威 Antifreeze/Engine Coolant 10 Year/152,000 Mile Formula or equivalent) — with Manual Transmission 1.4 Liter Engine (MOPAR威 Antifreeze/Engine Coolant 10 Year/152,000 Mile Formula or equivalent) — with Automatic Transmission U.S. 10.5 Gallons Metric 40 Liters 4 Quarts 4 Liters 4.6 Quarts 4.4 Liters 5.8 Quarts 5.
344 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Engine Coolant Engine Oil Engine Oil Filter Spark Plugs Fuel Selection Fluid, Lubricant, or Genuine Part MOPAR威 Antifreeze/Coolant 10 Year/152,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of Chrysler Material Standard MS-12106. Use API Certified SAE 5W-30 Engine Oil, meeting the requirements of Chrysler Material Standard MS-6395.
MAINTAINING YOUR VEHICLE 345 Chassis Component Manual Transmission – If Equipped Automatic Transmission – If Equipped Brake Master Cylinder Fluid, Lubricant, or Genuine Part MOPAR威 C635 DDCT/MTX Transmission Fluid MOPAR威 AW-1 Transmission Fluid MOPAR威 DOT 3, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable. Use only recommended brake fluids or equivalent.
M A I N T E N A N C ▫ Required Maintenance Intervals . . . . . . . . . . 349 E MAINTENANCE SCHEDULES CONTENTS 䡵 Maintenance Schedule . . . . . . . . . . . . . . . . . .
M A I N T E N A N C E 348 MAINTENANCE SCHEDULES NOTE: MAINTENANCE SCHEDULE The Scheduled Maintenance services listed in this • The oil change indicator message will not monitor the manual must be done at the times or mileages specified time since the last oil change. Change your vehicles oil to protect your vehicle warranty and ensure the best if it has been 6 months since your last oil change even vehicle performance and reliability.
MAINTENANCE SCHEDULES 349 M At Each Stop For Fuel A • Check all lights and other electrical items for correct I N operation. • Check the engine oil level about five minutes after a fully warmed engine is shut off. Checking the oil level At Each Oil Change while the vehicle is on level ground will improve the • Change the engine oil filter. accuracy of the oil level reading. Add oil only when • Inspect the brake hoses and lines. the level is at or below the ADD or MIN mark.
M 350 MAINTENANCE SCHEDULES A I 8,000 Miles (13,000 km) or N T 6 Months Maintenance Service E Schedule N Included in the Maintenance Program A N ❏ Change the engine oil and engine oil filter. C E ❏ Rotate the tires, rotate at the first sign of S C H E D U L E S 8 irregular wear, even if it occurs before 8,000 miles (13 000 km).
MAINTENANCE SCHEDULES 351 M 24,000 Miles (39,000 km) or 18 Months Maintenance Service Schedule Included in the Maintenance Program ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 24,000 miles (39 000 km).
M 352 MAINTENANCE SCHEDULES A I 32,000 Miles (52,000 km) or 24 Months Maintenance Service Schedule N T Included in the Maintenance Program E ❏ Change the engine oil and engine oil filter. N ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 32,000 miles (52 000 km). A ❏ Inspect exhaust system. N ❏ Replace the spark plugs. C ❏ Replace the engine air cleaner filter. E ❏ Replace cabin filter. S C H E D U L E S 8 ❏ ❏ ❏ ❏ ❏ Clean and lube sun roof tracks.
MAINTENANCE SCHEDULES 353 M 40,000 Miles (65,000 km) or 30 Months Maintenance Service Schedule 48,000 Miles (78,000 km) or 36 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 40,000 miles (65 000 km). Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code ❏ Change the engine oil and engine oil filter.
M 354 MAINTENANCE SCHEDULES A I 56,000 Miles (91,000 km) or N T 42 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate the tires, rotate at the first sign of C irregular wear, even if it occurs before E 56,000 miles (91 000 km). S C H E D U L E S 8 Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code 64,000 Miles (104,000 km) or 48 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter.
MAINTENANCE SCHEDULES 355 M 72,000 Miles (117,000 km) or 54 Months Maintenance Service Schedule 80,000 Miles (130,000 km) or 60 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 72,000 miles (117 000 km). Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code ❏ Change the engine oil and engine oil filter.
M 356 MAINTENANCE SCHEDULES A I 88,000 Miles (143,000 km) or N T 66 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate the tires, rotate at the first sign of C irregular wear, even if it occurs before E 88,000 miles (143 000 km). S C H E D U L E S 8 Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code 96,000 Miles (156,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter.
MAINTENANCE SCHEDULES 357 M 104,000 Miles (169,000 km) or 78 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 104,000 miles (169 000 km). Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code 112,000 Miles (182,000 km) or 84 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter.
M 358 MAINTENANCE SCHEDULES A I 120,000 Miles (195,000 km) or N T 90 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate the tires, rotate at the first sign of C irregular wear, even if it occurs before E 120,000 miles (195 000 km). S C H E D U L E S 8 Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code 128,000 Miles (208,000 km) or 96 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter.
MAINTENANCE SCHEDULES 359 M 136,000 Miles (221,000 km) or 102 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 136,000 miles (221 000 km). Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code 144,000 Miles (234,000 km) or 108 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter.
M 360 MAINTENANCE SCHEDULES A I 152,000 Miles (247,000 km) or N T 114 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate the tires, rotate at the first sign of C irregular wear, even if it occurs before E S C H E D U L E S 8 152,000 miles (247 000 km). ❏ Flush and replace engine coolant. ❏ Replace the timing belt.
MAINTENANCE SCHEDULES 361 M WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic. • Failure to properly inspect and maintain your vehicle could result in a component malfunction and affect vehicle handling and performance. This could cause an accident.
IF YOU NEED CONSUMER ASSISTANCE CONTENTS 䡵 Suggestions For Obtaining Service For Your Vehicle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 365 ▫ Prepare For The Appointment . . . . . . . . . . . 365 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . 365 ▫ Be Reasonable With Requests . . . . . . . . . . . . 365 䡵 If You Need Assistance ▫ Service Contract . . . . . . . . . . . . . . . . . . . . . 367 䡵 Warranty Information . . . . . . . . . . . . . . . . . .
364 IF YOU NEED CONSUMER ASSISTANCE 䡵 Department Of Transportation Uniform Tire Quality Grades . . . . . . . . . . . . . . . . . . . . . . . . 370 ▫ Treadwear . . . . . . . . . . . . . . . . . . . . . . . . . 370 ▫ Traction Grades . . . . . . . . . . . . . . . . . . . . . 371 ▫ Temperature Grades . . . . . . . . . . . . . . . . . .
IF YOU NEED CONSUMER ASSISTANCE 365 the service advisor and list the items in order of priority. At many authorized dealers, you may obtain a rental vehicle at a minimal daily charge. If you need a rental, it Prepare For The Appointment is advisable to make these arrangements when you call If you’re having warranty work done, be sure to have the for an appointment. right papers with you. Take your warranty folder. All work to be performed may not be covered by the IF YOU NEED ASSISTANCE warranty.
366 IF YOU NEED CONSUMER ASSISTANCE This is why you should always talk to an authorized FIAT Customer Center dealer’s service manager first. Most matters can be re- P.O. Box 21–8004 Auburn Hills, MI 48321–8004 solved with this process. Phone: (888) 242–6342 • If for some reason you are still not satisfied, talk to the general manager or owner of the authorized dealer- Customer Assistance For The Hearing Or Speech ship. They want to know if you need assistance.
IF YOU NEED CONSUMER ASSISTANCE 367 Service Contract You may have purchased a service contract for a vehicle to help protect you from the high cost of unexpected repairs after the manufacturer’s New Vehicle Limited Warranty expires. The manufacturer stands behind only the manufacturer’s service contracts. If you purchased a manufacturer’s service contract, you will receive Plan Provisions and an Owner Identification Card in the mail within three weeks of the vehicle delivery date.
368 IF YOU NEED CONSUMER ASSISTANCE WARNING! Engine exhaust, some of its constituents, and certain vehicle components contain, or emit, chemicals known to the State of California to cause cancer and birth defects, or other reproductive harm. In addition, certain fluids contained in vehicles and certain products of component wear contain, or emit, chemicals known to the State of California to cause cancer and birth defects, or other reproductive harm.
IF YOU NEED CONSUMER ASSISTANCE 369 West Building, Washington, D.C. 20590. You can also • Service Manuals obtain other information about motor vehicle safety from These comprehensive Service Manuals provide the inforhttp://www.safercar.gov. mation that students and professional technicians need in diagnosing/troubleshooting, problem solving, maintainIn Canada ing, servicing, and repairing FIAT Group Automobiles If you believe that your vehicle has a safety defect, you vehicles.
370 IF YOU NEED CONSUMER ASSISTANCE • Owner’s Manuals These Owner’s Manuals have been prepared with the assistance of service and engineering specialists to acquaint you with specific FIAT Group Automobiles vehicles. Included are starting, operating, emergency and maintenance procedures as well as specifications, capabilities and safety tips. Call toll free at: • 1–800–890–4038 (U.S.) • 1–800–387–1143 (Canada) Or Visit us on the Worldwide Web at: • www.techauthority.
IF YOU NEED CONSUMER ASSISTANCE 371 significantly from the norm due to variations in driving Temperature Grades habits, service practices, and differences in road charac- The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its teristics and climate. ability to dissipate heat, when tested under controlled condiTraction Grades tions on a specified indoor laboratory test wheel.
INDEX 10
374 INDEX Adding Engine Coolant (Antifreeze) . . . . . . . . . . 319 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 262 Adding Washer Fluid . . . . . . . . . . . . . . . . . . . . . 314 Additives, Fuel . . . . . . . . . . . . . . . . . . . . . . . . . 259 Air Cleaner, Engine (Engine Air Cleaner Filter) . . . 308 Air Conditioner Maintenance . . . . . . . . . . . . . . . 311 Air Conditioning . . . . . . . . . . . . . . . . . . . . . . . . 186 Air Conditioning Controls . . . . . . . . . . .
INDEX 375 B-Pillar Location . . . . . . . . . . . . . . . . . . . . . . . . 238 Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309 Jump Starting . . . . . . . . . . . . . . . . . . . . . . . 289 Keyless Transmitter Replacement (RKE) . . . . . 18 Belts, Seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Body Mechanism Lubrication . . . . . . . . . . . . . . . 312 Brake Assist System . . . . . . . . . . . . . . . . . . . . . . 226 Brake Fluid . . . . . . . . . . . . .
376 INDEX Child Seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Clean Air Gasoline . . . . . . . . . . . . . . . . . . . . . . . 257 Cleaning Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . 329 Climate Control . . . . . . . . . . . . . . . . . . . . . . . . . 186 Clutch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323 Clutch Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . 323 Compact Disc (CD) Maintenance . . . . . . . . . . . . .
INDEX 377 Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . 308 Emergency, In Case of Door Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Hazard Warning Flasher . . . . . . . . . . . . . . . 267 Jacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . 278 Door Locks, Automatic . . . . . . . . . . . . . . . . . . . . 22 Jump Starting . . . . . . . . . . . . . . . . . . . . . . . 289 Downshifting . . . . . . . . . . . . . . . . . . . . . . . . . . 207 Towing . . . . . .
378 INDEX Oil Selection . . . . . . . . . . . . . . . . . . . . . . . . 307 Oil Synthetic . . . . . . . . . . . . . . . . . . . . . . . . 308 Overheating . . . . . . . . . . . . . . . . . . . . . . . . 267 Starting . . . . . . . . . . . . . . . . . . . . . . . . . . . 203 Temperature Gauge . . . . . . . . . . . . . . . . . . . 138 Enhanced Accident Response Feature . . . . . . . . 48,297 Event Data Recorder . . . . . . . . . . . . . . . . . . . . . . 54 Exhaust Gas Caution . . . . . . . . . . . . . . . . .
INDEX 379 130 Glass Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . 330 257 257 Hazard Driving Through Flowing, Rising, or Shallow 343 Standing Water . . . . . . . . . . . . . . . . . . . . . . 217 262 Headlights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . 330 Gas Cap (Fuel Filler Cap) . . . . . . . . . . . . . . . 262,263 High Beam . . . . . . . . . . . . . . . . . . . . . . . . . 130 Gasoline (Fuel) . . . . . . .
380 INDEX Infant Restraint . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Information Center, Vehicle . . . . . . . . . . . . . . . . . 140 Instrument Cluster . . . . . . . . . . . . . . . . . . . . . . . 129 Instrument Panel and Controls . . . . . . . . . . . . . . 127 Instrument Panel Cover . . . . . . . . . . . . . . . . . . . 331 Instrument Panel Lens Cleaning . . . . . . . . . . . . . 331 Interior Appearance Care . . . . . . . . . . . . . . . . . . 329 Interior Lighting . . . . . . . . . . . .
INDEX 381 High Beam Indicator . . . . . . . . . . . . . . . . . . 130 Low Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . 130 Malfunction Indicator (Check Engine) . . . . . . 134 Oil Pressure . . . . . . . . . . . . . . . . . . . . . . . . 134 Park . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 Seat Belt Reminder . . . . . . . . . . . . . . . . . . . 131 Service Engine Soon (Malfunction Indicator) . . 134 Tire Pressure Monitoring (TPMS) . . . . . . . . . 132 Traction Control . . .
382 INDEX Viscosity . . . . . . . . . . . . . . . . . . . . . . . . . . . 307 Onboard Diagnostic System . . . . . . . . . . . . . . . . 302 Occupant Restraints . . . . . . . . . . . . . . . . . . . . . 44,50 Operator Manual (Owner’s Manual) . . . . . . . . . . . . 4 Occupant Restraints (Sedan) . . . . . . . . . . . 25,42,44,48 Overheating, Engine . . . . . . . . . . . . . . . . . . . 138,267 Octane Rating, Gasoline (Fuel) . . . . . . . . . . . . . . 257 Owner’s Manual (Operator Manual) . . . . . . . . .
INDEX 383 Preparation for Jacking . . . . . . . . . . . . . . . . . . . . 283 Restraints, Child . . . . . . . . . . . . . . . . . . . . . . . 55,60 Rotation, Tires . . . . . . . . . . . . . . . . . . . . . . . . . . 251 Pretensioners Seat Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Safety Checks Inside Vehicle . . . . . . . . . . . . . . . . . 67 Radial Ply Tires . . . . . . . . . . . . . . . . . . . . . . . . . 245 Safety Checks Outside Vehicle . . . . . . . . . . . . . . .
384 INDEX Seat Belts (Sedan) . . . . . . . . . . . . . . . . . . . . . . . . 25 Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . 87 Heated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 Selection of Oil . . . . . . . . . . . . . . . . . . . . . . . . . 307 Sentry Key (Immobilizer) . . . . . . . . . . . . . . . . . . . 14 Service Assistance . . . . . . . . . . . . . . . . . . . . . . . 365 Service Contract .
INDEX 385 Storing Your Vehicle . . . . . . . . . . . . . . Stuck, Freeing . . . . . . . . . . . . . . . . . . Sun Roof . . . . . . . . . . . . . . . . . . . . . . Supplemental Restraint System - Airbag Synthetic Engine Oil . . . . . . . . . . . . . . . . . . . . . . 338 . . . . . . . . 293 . . . . . . . . 114 . . . . . . . . 38 . . . . . . . . 308 Tachometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 Temperature Control, Automatic (ATC) . . . . . . . .
386 INDEX To Open Hood . . . . . . . . . . . . . . . . . . . . . . . . . . 94 Towing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263 Disabled Vehicle . . . . . . . . . . . . . . . . . . . . . 295 Recreational . . . . . . . . . . . . . . . . . . . . . . . . 264 Trailer Towing . . . . . . . . . . . . . . . . . . . . . . . . . . 263 Transaxle Automatic . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Transmission Automatic . . . . . . . . . . . . . . . . . . . . . . . 207,325 Filter .
INDEX 387 Water Driving Through . . . . . . . . . . . . . . . . . . . . . 217 Wheel and Wheel Trim . . . . . . . . . . . . . . . . . . . . 329 Wheel and Wheel Trim Care . . . . . . . . . . . . . . . . 329 Wind Buffeting . . . . . . . . . . . . . . . . . . . . . . . 24,115 Window Fogging . . . . . . . . . . . . . . . . . . . . . . . . 196 Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Windshield Defroster . . . . . .
VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name Chrysler Group LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefore. DRIVING AND ALCOHOL Drunken driving is one of the most frequent causes of accidents. Your driving ability can be seriously impaired with blood alcohol levels far below the legal minimum. If you are drinking, don’t drive. Ride with a designated non-drinking driver, call a cab, a friend, or use public transportation.
2012 500 2012 OWNER’S MANUAL Chrysler Group LLC 12FF500-126-AF 6th Edition 500 Printed in U.S.A. 872214.ps 12FF500-126-AA Fiat 1" gutter 10/04/2010 11:37:45 2012 500 2012 OWNER’S MANUAL Chrysler Group LLC 12FF500-126-AA First Edition Printed in U.S.A.
