SDS

Ingestion: Wash out mouth with small amounts of water and remove person to fresh air. Do not induce
vomiting unless directed to do so by medical personnel. Seek medical attention immediately. If
unconscious, place in recovery position. Never give anything by mouth to an unconscious person.
Primary Routes of Entry: Eye and skin contact, breathing vapors.
SECTION 5: Fire-Fighting Measures
Flash Point: >450° F (>232 °C) Flammable Limits (STP In Air)
Method Used: ASTM D3278-96 LFL/UFL: Not Determined
Suitable Extinguishing Media: Water fog, alcohol-resistant foam, CO
2
and dry chemicals
Unsuitable Extinguishing Media: None known
Specific Hazards and Procedures: Remove all persons from the vicinity. Burning material
may generate large amounts of vapor and produce noxious and toxic fumes. Combustion and/or
decomposition products include carbon oxides.
Specific Fire Fighting Equipment: Firefighters should wear a self-contained breathing apparatus
and personal protective clothing.
Hazardous Combustion Products: Burning material may generate large amounts of vapor and
produce noxious and toxic fumes. Combustion and/or decomposition products include carbon
monoxide, carbon dioxide and halogenated compounds.
SECTION 6: Accidental Release Measures
Personal Protective Measures: Provide adequate ventilation and keep all unnecessary and unprotected
personnel from entering the area. Do not touch or walk through spilled material. Avoid breathing vapor
or mist. Wear an appropriate respirator when ventilation is inadequate. Use appropriate safety
equipment before taking any action.
Methods and Material for Containment and Cleaning Up: Absorb spill with an inert material such as
sand if necessary. Scrape up and place in appropriate waste disposal container. Remove residual resin
with non-flammable solvent and flush contaminated area with hot water. Do not dump waste into any
sewers, on the ground or into any body of water. Avoid dispersal of spilled material and runoff. All
disposal methods must be compliant with all Federal, State, and local laws and regulations.
SECTION 7: Handling and Storage
Precautions for Safe Handling: Wear safety glasses. Do not get in eyes, on skin or on clothing. Avoid
any forms of ingestion. Do not breathe vapor. Use only with good ventilation or use suitable respiratory
protection. Persons with a history of skin sensitization problems should avoid contact with any process
in which this product is used. Do not get in eyes or on skin or clothing. Do not ingest. Avoid release to
the environment. Keep in the original container or an approved alternative made from a compatible
material, kept tightly closed when not in use. Empty containers retain product residue and can be
hazardous. Do not reuse container.
Page | 3