SDS

Other Information: None Percent Volatiles by Volume : <0.1
SECTION 10: Stability and Reactivity
Reactivity: Product reacts exothermically with amine and amide-based curing agents. Product by itself
is stable and relatively non-reactive under normal conditions of use, storage and shipping.
Chemical Stability: Product is stable under normal conditions. Prolonged excessive heat may
cause partial degradation.
Possibility of Hazardous Reactions: Under normal conditions of storage and use, hazardous reactions
will not occur.
Conditions to Avoid: Avoid contact with incompatible materials. Avoid excessive heat. Store
between 60-90°F.
Incompatible Material: Avoid contact with strong acids or bases in bulk and strong oxidizing
materials. Avoid bulk contact with amines, amides and other curing agents. Material reacts with
considerable heat release with some curing agents.
Hazardous Decomposition Products: Carbon monoxide, carbon dioxide, acrid smoke and fumes
Hazardous Polymerization: Will not occur by itself, but hazardous polymerizations may occur
with aliphatic amines in masses greater than one pound with considerable heat buildup.
SECTION 11: Toxicological Information
Acute Toxicity: The formulated product is not considered to be acutely toxic.
Component
Reaction product: Bisphenol-
A-(Epichlorhydrin); epoxy
resin O-Cresyl Glycidyl Ether
Oral LD50
Dermal LD 50
Inhalation LC 50
11.4 g/kg (rat)
>20g/kg (rabbit)
-
5.8 g/kg (rat)
>2000 mg/kg (rabbit)
1220 ppm (rat, 4 hr)
Skin Corrosion/Irritation: The formulated product is considered a moderate skin irritant.
Component
Reaction product: Bisphenol-A-
(Epichlorhydrin); epoxy resin
Reaction product: Bisphenol-A-
(Epichlorhydrin); epoxy resin
Species
Skin Exposure
Observation
Rabbit
100 mg
Mild Irritant
Rabbit
20 mg, 24 hours
Moderate Irritant
Serious Eye Damage/Irritation: The formulated product is considered a severe eye irritant.
Component Species Eye Exposure Observation
Reaction product: Bisphenol-A- Rabbit 500 µl, 24 hours Moderate Irritant
Page | 5