Declaration of Conformity

ManualsBrandsABB Xiamen Smart Technology ManualsComputers & AccessoriesSmart Access Point Lite with Wi-Fi function

English

Smart Access Point Lite

DANGER

Dangerous currents flow through the body when coming

into direct or indirect contact with live components. This

can result in electric shock, burns or even death. Work

improperly carried out on current-carrying parts can cause

fires.

– Disconnect the mains voltage prior to mounting and

dismantling!

– Permit work on the 100 – 240 V mains network to be

carried out only by specialist staff.

■

Please read the mounting instructions carefully and keep them for

future use.

■

Additional user information and information about planning is

available at http://new.abb.com/low-voltage/products/building-

automation/product-range/abb-welcome or by scanning the QR

code.

Intended use

As a part of the ABB-Welcome IP system, this device can only be

used with accessories from the system.

Technical data

Rating voltage

24 V

⎓

Operating voltage

range

20-27 V

⎓

Rating current

24 V

⎓

, 375 mA

PoE standard IEEE802.3 af

Wireless transmission

band

802.11b/g/n:

2412...2462MHz (for United States)

2412...2472MHz (for European countries)

802.11a/n:

5150…5250MHz

5250…5350MHz

5470…5725MHz

5725…5850MHz (for United States)

Wireless transmission

power

Max. 20 dBm@12 Mbps OFDM 2.4 G

Max. 20 dBm@12 Mbps OFDM 5.8 G

Wireless transmission

standard

IEEE 802.11 a/b/g/n

Operating temperature -10 °C…+45 °C

Storage temperature -25 °C…+70 °C

IP level IP 30

IK level IK 05

Relay output

30 V

⎓

, 1 A

Dry contact input

5 V

⎓

, 1mA

FCC ID: 2AEBL-D04012

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC rules.

The complete of FCC information is available at the package shipped

with the product.

EU declaration of conformity

Hereby, ABB Xiamen Smart Technology Co., Ltd.,, declares that this

Smart Access Point Lite D04013 is in compliance with the essential

requirements and other relevant provisions of RE Directive

2014/53/EU. The complete of the EU declaration of conformity is

available by scanning the QR code.

Connection and operation

1 USB stick connector (reserved)

2 Tamper switch

3 Status indicator

Binary input (e.g. if 3rd-party alarm system is arming, paired

Welcome APP will receive a notification.)

Binary output (e.g. if door is opened, the 3rd-party alarm

system is disarmed or smart home system is triggered.)

6 Reset button

Access point mode switch

When AP mode is activated, LED flashes red light.

8 Micro SD card connector (reserved)

Security switch

ON = does not allow new devices

OFF = allows new devices (default)

10 Power input connector (DC-JACK input)

11 LAN (PoE)

12 LAN, Reserved

Manufacturer

ABB Xiamen Smart Technology Co., Ltd.,

Address: No.7 Fangshan South Road, Xiang An, Xiamen, Fujian,

China

Post Code: 361000