Cut Sheet

18 FT Flexitest family | Descriptive bulletin
6.1. FT-1, FT-1F and FT-1X switches are available in any com-
bination of 1 to 10 poles. Each different configuration of poles is
assigned a unique part number or style number by the factory.
See ordering information chart for FT-1, FT-1X, and FT-1F on
pages 16-17.
The standard FT-1 Style Number defines a unique pole configu-
ration with black cover and screw terminals ex: 129A501G01.
Adding a prefix and/or suffix to the standard Style Number
allows the selection of options for FT-1 as well as the ability to
create complete FT-1F and FT-1X style numbers.
Customers may also place an order by providing a complete
switch arrangement definition as well as the selected options.
ex: P X P C-C C-C C-C P (P1 X0 P1 C1-C1 C1-C1 C1-C1 P1),
clear cover, screw terminals.
6.1.1. Terminal connections
An optional FT-1 Switch with stud and nut termination can be
supplied at no additional charge. Style Number prefix “S” is
used for this option, ex: S129A501G01. For optional clear cover
with stud and nut terminals use style number prefix “CS”, ex:
CS129A501G01. See pages 16-17 for more ordering details.
6.1.2. Cover
An optional clear cover will be supplied instead of the black
cover by using style number prefix “C,” ex: C129A501G01.
6.1.3. Depth
An FT-1X extended switch with black cover will be supplied
by using suffix “X08” for 8 inches and “X10” for 10 inches, ex:
129A501G01X08 or 129A501G01X10.
An FT-1X extended switch with clear cover will be supplied by
using prefix “C” and suffix “X10”, ex: C129A501G01X10
6.1.4. Front connected
Adding a prefix “F” to the standard style number is used for a
front connected FT-1F switch, which allows the user to make
the connections on the front of the switch.
6.2. FT-14 switch is available in any combination up to 14 poles.
Each different style number is based on a smart part number
system. See ordering information chart on page 17.
6.2.1. Terminal connections
A standard FT-14 Switch with screw termination will be supplied
when using the normal style number. An optional FT-14 switch
with stud and nut termination can be supplied at no additional
charge provided when the seventh character on the smart part
number is changed from “T” to “S.”
6.2.2. Cover
A standard FT-14 Switch with clear cover will be supplied when
using the normal style number. An optional FT-14 switch with
black cover can be supplied at no additional charge provided
the tenth character in the above styles is changed from “C” to
“B”. An optional FT-14 switch with lockable clear or black cover
can be supplied at no additional charge provided the tenth
character changed from “C” to either “L” (lockable clear) or “R”
(lockable black).