Cut Sheet

4 FT Flexitest family | Descriptive bulletin

1 FT-1 | 2 FT-1F | 3 FT-1X | 4 FT-14 | 5 FT-19R 2RU with Full Length Clear Cover

2. The most complete family of test switches

345

2.1. FT-1 Standard 10 pole, rear connected test switch.

2.2. FT-1F Surface mount switch allows the user to make the

same connections as with FT-1 but on the front of the switch.

2.3. FT-1X Extended length test switch brings the rear terminal

connections to the same depth as most panel mounted protec-

tive relays and equipment for easier and faster access to wiring

points. Extended 8 inches or 10 inches depth is available.

2.4. FT-14 Provides the same features and reliability as FT-1 but

with a maximum of 14 individual poles. Although supplying 40%

more capacity than the FT-1, the FT-14 only requires 18% more

space.

2.5. The FT-19R and FT-19RX assemblies accommodate up to

three FT-1 switches mounted on a 19” wide, and two-rack unit

(2RU), three-rack unit (3RU), or four-rack unit (4RU) high panel

suitable for rack or switchboard mounting. These assemblies

can be ordered with a full-length clear cover (standard), or op-

tional individual clear covers for each switch.

The FT-19RX extends the rear terminals of the FT-1 switches to

the same depth as most 19” rack mounted equipment thereby

providing improved access to the rear terminals. FT-19RX two-

rack unit assemblies (2RU) allow the user to mount protective

relays or other equipment in the racks directly above and below

the FT-19RX, optimizing the space in the rack and reducing the

amount of wire required.