Cut Sheet

Descriptive bulletin | FT Flexitest family 7
4.1. Certifications
All Flexitest Switches meet or exceed all requirements of ANSI/
IEEE Standard C37.90. Class 1E switches meet IEEE C37.98,
C37.105, 323-1983 and 344-1987 Standards.
UL and CUL file number E103204, CSA, and 1E certification are
available for most test switches. Contact your ABB representa-
tive for more details.
4.2. Ratings
All Flexitest switches are rated at 600 Volts AC and 30 Amps.
4.3. Mounting
The FT-1, FT-14, and FT-1X switches are designed for semi-
flush mounting on the front of switchboard panels, facilitating
inspection and accessibility. The FT-1F is designed for surface
mounting and can also be mounted on a unistrut with the use
of a unistrut adapter plate. Refer to figures 7 to 9 beginning on
page 30 for the specific outline and drilling plan information of
each switch.
The FT-19R, FT-19RX, and FT-19RS are designed for mounting
on 19-inch rack structures or conventional panels. The FT-22RS
are designed for mounting on 22-inch rack
structures.
Connections, dimensions and layout are shown on pages 30-
37.
Approximate shipping weight and dimensions
Device type Net
lbs (kg)
Shipping
lbs (kg)
Shipping container
L x W x H in (mm)
FT-1 and FT-1F 1.75 (0.79) 3 (1.4) 4 (100) x 7 (177) x 5 (126)
FT-1X 2.7 (1.25) 3.75 (1.7) 4 (100) x 12 (300) x 7 (177)
FT-14 2.5 (1.5) 3.25 (1.5) 4 (100) x 9 (225) x 5 (126)
FT-19R 7.0 (3.18) 12 (6) 10 (254) x 21 (534) x 10 (254)
FT-19RX 9.0 (4.08) 17 (8) 10 (254) x 21 (534) x 16 (407)
FT-19RS 7.0 (3.18) 12 (6) 10 (254) x 21 (534) x 10 (254)
FT-22RS 7.0 (3.18) 12 (6) 10 (254) x 24 (610) x 10 (254)
Separate Source Test Plug
(10 position)
1.5 (0.68) 3 (1.4) 10 (253) x 7 (177) x 5 (126)
For up to 4 pieces
In-Service Series Test Plug
(10 position)
1.5 (0.68) 3 (1.4) 10 (253) x 7 (177) x 5 (126)
For up to 4 pieces
Individual Current Circuit Test Plug 0.1 (0.045) 1 (0.45) 10 (253) x 7 (177) x 5 (126)
For up to 30 pieces
4. Specifications