60TA001 060106 Terminal blocks A - Screw clamp connection A Summary 1. Feed-through terminal blocks Standard terminal blocks ........................................................................................................ Single pole multiclamp terminal blocks .................................................................................. Double deck terminal blocks .................................................................................................. Triple deck terminal blocks .
160T01166 051020 SCREW CLAMP TERMINAL BLOCKS TECHNICAL SPECIFICATIONS Multi-function channels With the central multifunction channel, test plugs and jumper bars (with screw or screw-less) and alternated jumper bars and labelling systems can be put in place. Labelling A Blocks can be identified using pre-printed or made-to-measure markers, in the form of tapes, which can be put into place both easily and rapidly.
160T01166 051020 SCREW CLAMP CONNECTION TECHNOLOGY ABB Entrelec has over 50 years’ experience in screw clamp connections. A standard system produced in billions of models, this technology can be found on a very wide range of products. A Safety The connection’s reliability and long life are ensured by : - The excellent contact pressure provided by the steel clamp. - High resistance to corrosion offered by dichromate zinc surface treatment. - Any conductor creep compensated by the resilience of the clamp.
160T01001 060529 MA 2,5/5... Standard terminal blocks Screw clamp Spacing 5 mm + 0,08 (.200") DIN 1 - 3 Colour Type Part numbers Standard blocks Grey Blue Yellow Red Black White Orange Beige V0 MA 2,5/5 MA 2,5/5.N MA 2,5/5 MA 2,5/5 MA 2,5/5 MA 2,5/5 MA 2,5/5 MA 2,5/5.V0 1SNA 115 486 R0300 1SNA 125 486 R0500 1SNA 105 486 R1200 1SNA 400 184 R2700 1SNA 105 077 R2200 1SNA 105 052 R2100 1SNA 105 075 R2000 1SNA 195 486 R0400 A Standard 5 mm block.
160T01002 060529 MA 2,5/5.1... MA 2,5/5.2 Spacing 5 mm + 0,08 (.200") Grey Blue Spacing 5 mm + 0,08 (.200") MA 2,5/5.1 MA 2,5/5.1.N 1SNA 115 485 R0200 1SNA 125 485 R0400 Grey 1SNA 115 492 R0100 A MA 2,5/5.1 equipped with a test socket DIA. 2 mm/.079" MA 2,5/5 blocks with partition. Type FEM6 FEM6 FEM6 FEM6 FEM6 FEM6 FEM6 V0 FEM6 Part numbers V0 th.2,8 mm th.2,8 mm th.2,8 mm th.2,8 mm th.2,8 mm th.2,8 mm th.2,8 mm th.
160T01005 060529 M 4/6... Standard terminal blocks Screw clamp Spacing 6 mm + 0,05 (.238") DIN 1 - 3 Colour Type Standard blocks Grey Blue Orange Yellow Green Red Black White Brown Purple Beige V0 M 4/6 M 4/6.N M 4/6 M 4/6 M 4/6 M 4/6 M 4/6 M 4/6 M 4/6 M 4/6 M 4/6.
160T01006 060529 M 4/6.T M 4/6.1 M 4/6.2 M 4/6.3 M 4/6.4 M 4/6.C Spacing 6 mm + 0,05 (.238") Spacing 6 mm + 0,05 (.238") Spacing 6 mm + 0,05 (.238") Spacing 6 mm + 0,05 (.238") Spacing 6 mm + 0,05 (.238") Spacing 6 mm + 0,05 (.238") Grey Beige V0 1SNA 115 224 R1300 Grey 1SNA 195 224 R1400 Beige V0 Orange M 4/6 with 1 test socket screw DIA. 2 mm:.
160T01003 060106 MS 4/6... Standard terminal blocks Screw clamp MS 6/8... Spacing 6 mm + 0,05 (.238") Spacing 8 mm - 0,05 (.315") Simplified 6 mm block (compact over-all dimensions) Simplified 8 mm block (compact over-all dimensions) DIN 1 - 3 A 1 End stop th. 9 mm BADL V0 1SNA 399 903 R0200 th. 10 mm BAM2 V2 1SNA 206 351 R1600 End stop th. 10 mm BAM2 V0 V0 1SNA 296 351 R0000 End stop 35 x 7,5 x 1 PR3.
160T01017 051020 Colour M 4/6.3A... Single pole, multiclamp terminal blocks Type Part numbers Standard blocks M 4/6.3A Grey M 4/6.3A.N Blue M 4/6.3A.V0 Beige V0 M 4/6.3A with partition M 4/6.3A.1 Grey Spacing 6 mm + 0,1 (.238") Screw clamp DIN 1 - 3 1SNA 115 468 R2000 1SNA 125 468 R2200 1SNA 195 468 R2100 1SNA 115 483 R0000 A Standard 6 mm block.
160T01018 051020 Colour M 4/6.4A... Single pole, multiclamp terminal blocks Type Part numbers Standard blocks M 4/6.4A Grey M 4/6.4A.N Blue M 4/6.4A.V0 Beige V0 M 4/6.4A with partition M 4/6.4A.1 Grey Spacing 6 mm + 0,1 (.238") Screw clamp DIN 1 - 3 1SNA 115 479 R2300 1SNA 125 479 R2500 1SNA 195 479 R2400 1SNA 115 482 R0700 A Standard 6 mm block.
Notes 23 NOTE_23 051021 Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.
160T01007 060529 M 6/8... Standard terminal blocks Screw clamp Spacing 8 mm - 0,05 (.315") DIN 1 - 3 Colour Type Part numbers Standard block Grey Blue Orange Yellow Red Black White Beige V0 M 6/8 M 6/8.N M 6/8 M 6/8 M 6/8 M 6/8 M 6/8 M 6/8.V0 1SNA 115 118 R1100 1SNA 125 118 R1300 1SNA 105 004 R2200 1SNA 105 118 R2000 1SNA 400 239 R1500 1SNA 400 186 R2100 1SNA 400 187 R2200 1SNA 195 118 R1200 A 1SNA 115 118 R1100 Standard 8 mm block.
160T01008 060529 M 6/8.1... M 6/8.2 M 6/8.3 M 6/8.4 M 6/8.C M 6/8.RTS Spacing 8 mm - 0,05 (.315") Spacing 8 mm - 0,05 (.315") Spacing 8 mm - 0,05 (.315") Spacing 8 mm - 0,05 (.315") Spacing 8 mm - 0,05 (.315") Spacing 8 mm - 0,05 (.315") Grey Green Beige V0 Blue M 6/8.1.N 1SNA 115 260 R0300 Grey 1SNA 105 128 R2200 Beige V0 1SNA 195 260 R0400 1SNA 115 218 R2500 Grey 1SNA 195 218 R2600 Beige V0 1SNA 125 260 R0500 M 6/8 equipped with a test M 6/8 with partition socket DIA. 2 mm/.
160T01009 060116 M 10/10... Standard terminal blocks Screw clamp Spacing 10 mm - 0,05 (.394") DIN 1 - 3 Colour Type Part numbers Standard blocks Grey Blue Yellow Red Black White Beige V0 M 10/10 M 10/10.N M 10/10 M 10/10 M 10/10 M 10/10 M 10/10.
160T01010 060116 M 10/10.1 M 10/10.4 M 10/10.C M 10/10.RTS Spacing 10 mm - 0,05 (.394") Spacing 10 mm - 0,05 (.394") Spacing 10 mm - 0,05 (.394") Spacing 10 mm - 0,05 (.394") Grey Beige V0 1SNA 115 261 R2000 Grey 1SNA 195 261 R2100 M 10/10 with partition. 1SNA 115 474 R1600 Grey Beige V0 M 10/10.1 equipped with a test socket DIA. 4 mm/.16". 1SNA 115 228 R2700 Grey 1SNA 195 228 R2000 M 10/10 equipped with a flexible test socket DIA. 2,5 mm/.10" for connector.
0T01011 060116 M 16/12... Standard terminal blocks Screw clamp Spacing 12 mm - 0,1 (.473") DIN 1 - 3 A Standard 12 mm block with partition. Colour Type Part numbers Standard blocks Grey Blue Yellow Red Black White Beige V0 M 16/12 M 16/12.N M 16/12 M 16/12 M 16/12 M 16/12 M 16/12.
160T01012 060116 M 16/12.C M 16/12.2A.G Spacing 12 mm - 0,1 (.473") Spacing 12 mm - 0,1 (.473") Grey Beige V0 1SNA 115 210 R2100 Grey 1SNA 195 210 R2200 12 mm block equipped with a flexible test socket DIA. 2,5 mm for connector. 1SNA 115 679 R0300 A Standard 12 mm block with partition and central quick-connect output.
160T01013 060116 M 35/16.2A.2G M 35/16 Standard terminal blocks Screw clamp Spacing 16 mm -0,1 (.630") Spacing 16 mm -0,1 (.630") DIN 1 - 3 center of rail A Standard 16 mm block with partition and central quick-connect tabs Standard 16 mm block with partition. 1 Colour refer to the section "Special Applications" for part numbers and characteristics. End stop th. 9 mm BADL V0 1SNA 399 903 R0200 End stop th. 10 mm BAM2 V2 1SNA 206 351 R1600 th.
160T01014 051020 M 70/22... Standard terminal blocks Screw clamp M 70/22.O Spacing 22 mm -0,1 (.866") Spacing 22 mm -0,1 (.866") Standard 22 mm block with partition. Tighten clamp with 6 mm Allen Key. Standard 22 mm block with open partition for jumper bar. DIN 1 - 3 A refer to the section "Special Applications" for part numbers and characteristics. Colour Type Grey Blue Beige V0 M 70/22 M 70/22.N M 70/22.
160T01015 051020 M 95/26... Standard terminal blocks Screw clamp Installation of jumper bar Spacing 26 mm (1.02") DIN 1 - 3 A Standard 26 mm block. Delivered with end plate. Tighten clamp with 6 mm Allen Key. 1 refer to the section "Special Applications" for part numbers and characteristics. Colour Type Grey Blue Beige V0 M 95/26 M 95/26.N M 95/26.V0 Part numbers 1SNA 115 556 R1000 1SNA 125 556 R1200 1SNA 195 556 R1100 Characteristics End stop th. 12 mm BADH V2 1SNA 116 900 R2700 th.
160T04020 051020 D 150/31.D10 Standard terminal blocks Screw clamp Spacing 31 mm (1.22") DIN 3 center of rail A Standard 31 mm block. Delivered with end plate and 10 mm² (6 AWG) tap. Colour Type Grey Blue Yellow/Green 1 Part numbers Partition to cut to fit the wire diameter. D 150/31.D10 1SNA 399 715 R0400 D 150/31.D10.N 1SNA 399 717 R0600 D 150/31.D10.PI 1SNA 399 716 R0500 Characteristics Wire size End stop th. 12 mm BADH V2 1SNA 116 900 R2700 th.
160T04021 051020 D 240/36.D10 Standard terminal blocks Screw clamp Spacing 36 mm (1.41") DIN 3 center of rail A Standard 36 mm block. Delivered with end plate and 10 mm² (6 AWG) tap. 1 Colour Type Grey Blue Green/Yellow Part numbers Partition to cut to fit the wire diameter. D 240/36.D10 1SNA 399 704 R1200 D 240/36.D10.N 1SNA 399 706 R1400 D 240/36.D10.PI 1SNA 399 705 R1300 Characteristics Wire size End stop th. 12 mm BADH V2 1SNA 116 900 R2700 th.
Notes 35 NOTE_35 051021 Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.
160T01019 051020 MA 2,5/5.D2.1... MA 2,5/5.D2... Double-deck terminal blocks Spacing 5 mm +0,08 (.200") Spacing 5 mm +0,08 (.200") Standard 5 mm block MA 2,5/5.D2 with partition Screw clamp DIN 1 - 3 A 1 Colour refer to the section "Special Applications" for part numbers and characteristics. Type Part numbers Colour MA 2,5/5.D2 MA 2,5/5.D2.N MA 2,5/5.D2.V0 Grey Blue Beige V0 1SNA 115 490 R1300 1SNA 125 490 R1500 1SNA 195 490 R1400 Characteristics End stop th.
160T01020 051020 MA 2,5/5.D1.1... Double-deck terminal block Spacing 5 mm +0,08 (.200") Screw clamp DIN 1 - 3 A MA 2,5/5.D2.1 with vertical interconnection and partition on lower deck. 1 Colour Type Part numbers MA 2,5/5.D1.1 1SNA 115 530 R1200 MA 2,5/5.D1.1N 1SNA 125 530 R1400 Grey Blue Characteristics End stop th. 12 mm BADH V2 1SNA 116 900 R2700 th. 9,1 mm BAMH V2 1SNA 114 836 R0000 End stop th. 9,1 mm BAMH V0 V0 1SNA 194 836 R0100 End stop 1SNA 174 300 R1700 Rail 35 x 7,5 x 1 PR3.
160T01021 051020 Double-deck terminal blocks M 4/6.D2... M 4/6.D2.1... Spacing 6 mm +0,05 (.238") Pas 6 mm +0,05 (.238") Standard 6 mm block. M 4/6.D2 with partition. Screw clamp DIN 1 - 3 A Colour 1 refer to the section "Special Applications" for part numbers and characteristics. Type Part numbers Colour M 4/6.D2 M 4/6.D2 M 4/6.D2 M 4/6.D2 M 4/6.D2 M 4/6.D2 M 4/6.D2 M 4/6.D2.
160T01022 051021 M 4/6.D2.2... M 4/6.D1... M 4/6.D2.4 M 4/6.D1.1... Spacing 6 mm + 0,05 (.238") Spacing 6 mm + 0,05 (.238") Spacing 6 mm + 0,05 (.238") M 4/6.D2.2... equipped with 2 test sockets. M 4/6.D2.4 equipped with 1 test socket for upper deck only. M 4/6.D2.1 with vertical interconnection and partition on the lower deck. M 4/6.D1 with no partition on the lower deck. A 1 Colour Type Grey/Test socket DIA. 2 Beige V0/Test socket DIA. 2 Grey/Test socket DIA. 3 Grey/Test socket DIA.
160T01023 051021 Double-deck terminal blocks M 4/7.D1 M 4/7.D2.1 Spacing 7 mm +0,1 (.280") Spacing 7 mm +0,1 (.280") M 4/6.D2.1 equipped with a partition for 600 V CSA. M 4/6.D1 equipped with a partition for 600 V CSA. Screw clamp DIN 1 - 3 A 1 Colour Type Grey M 4/7.D2.1 Part numbers Colour 1SNA 115 127 R0200 Characteristics End stop th. 12 mm BADH V2 1SNA 116 900 R2700 th. 9,1 mm BAMH V2 1SNA 114 836 R0000 End stop th. 9,1 mm BAMH V0 V0 1SNA 194 836 R0100 End stop 35 x 7,5 x 1 PR3.
160T01024 051021 M 6/8.D2 Double-deck terminal blocks M 6/8.D2.1 Spacing 8 mm +0,05 (.315") Spacing 8 mm +0,05 (.315") Standard 8 mm block. M 6/8.D2 with partition. Screw clamp DIN 1 - 3 A 1 Colour Type Part numbers Colour Grey Beige V0 M 6/8.D2 M 6/8.D2.V0 1SNA 115 501 R1200 1SNA 195 501 R1300 Notes The use of some accessories may decrease the block's voltage rating. For more information, consult us.
160T01025 051021 M 6/8.D1 Double-deck terminal blocks Spacing 8 mm +0,05 (.315") Screw clamp DIN 1 - 3 A M 6/8.D2.1 with vertical interconnection and partition on the lower deck. 1 Part numbers Colour Type Grey M 6/8.D1 1SNA 115 498 R1700 Characteristics End stop th. 12 mm BADH V2 1SNA 116 900 R2700 th. 9,1 mm BAMH V2 1SNA 114 836 R0000 End stop th. 9,1 mm BAMH V0 V0 1SNA 194 836 R0100 End stop 1SNA 174 300 R1700 35 x 7,5 x 1 PR3.
160T01031 051021 Triple-deck terminal blocks D 4/6.T1 D 4/6.T3 Spacing 6 mm (.238") Spacing 6 mm (.238") Screw clamp DIN 3 A 1 D4/6.T3 with vertical interconnection. Standard 6 mm block. Colour Part numbers Colour Type 3 "feed-through" circuits Grey V0 D 4/6.T3 1SNA 299 683 R0100 Rigid Flexible IEC NFC DIN UL/CSA 0,2-4 mm² 0,22-4 mm² 22-12 AWG 22-12 AWG 500 V 6 kV 3 300 V 32 A 20 A Voltage Rated 9,5 mm .37 " Accessories 4 mm² / A4 Recommended Recommended screwdriver torque 4 mm .
160T01046 051021 D 4/6.T3.P Triple-deck terminal blocks + ground protection Spacing 6 mm (.238") Screw clamp DIN 3 A 1 Standard 6 mm block + ground protection. Colour Type Part numbers 3 "feed-through" circuits 1 clamp electrically connected to the mounting rail D 4/6.T3.P Grey V0 1SNA 299 684 R0200 Characteristics Wire size End stop th. 12 mm BADH V2 1SNA 116 900 R2700 th. 9,1 mm BAMH V2 1SNA 114 836 R0000 End stop End stop th. 9,1 mm BAMH V0 V0 1SNA 194 836 R0100 35 x 7,5 x 1 PR3.
160T01049 051021 D 4/6.P.T1 Triple-deck terminal blocks + ground protection Spacing 6 mm (.238") Screw clamp DIN 3 A 1 Ground terminal block to be used with D4/6.T... Colour Type Part numbers 7 clamps electrically grounded to the mounting rail Green/yellow V0 D 4/6.P.T1 1SNA 199 220 R0000 Characteristics Wire size End stop th. 12 mm BADH V2 1SNA 116 900 R2700 th. 9,1 mm BAMH V2 1SNA 114 836 R0000 End stop End stop th. 9,1 mm BAMH V0 V0 1SNA 194 836 R0100 35 x 7,5 x 1 PR3.
160T01104 060207 Three level sensor terminal blocks without ground connection D 2,5/6.DL D 2,5/6.D Spacing 6 mm +0,05 (.238") Spacing 6 mm +0,05 (.238") Three level block for sensor Three level block for sensor with LED indication between middle and upper level (red 24V=) Screw clamp DIN 3 A 2 Part numbers Colour Colour Type Grey D 2,5/6.D 1SNA 115 542 R1200 Characteristics Notes The use of some accessories may decrease the block's voltage rating. For more information, consult us.
160T01026 051021 1SNC 160 001 C0205 Three level sensor terminal blocks without ground connection D 2,5/6.DL1 Spacing 6 mm + 0,05 (.238") Screw clamp DIN 3 A Three level block for sensor with LED indication between lower and upper level (red 24V=) Colour Type Grey D 2,5/6.DL1 2 Part numbers 1SNA 115 538 R1600 Characteristics Wire size End stop th. 12 mm BADH V2 1SNA 116 900 R2700 th. 9,1 mm BAMH V2 1SNA 114 836 R0000 End stop th. 9,1 mm BAMH V0 V0 1SNA 194 836 R0100 End stop 35 x 7,5 x 1 PR3.
160T01103 051021 1SNC 160 001 C0205 Three level sensor terminal blocks without ground connection D 2,5/6.DA D 2,5/6.DAL Spacing 6 mm + 0,05 (.238") Spacing 6 mm + 0,05 (.238") Three level block for power Three level sensor block with LED indicator between upper and middle level (red 24V=) Screw clamp DIN 3 A 2 refer to the section "Special Applications" for part numbers and characteristics. Colour Type Grey Blue D 2,5/6.DA D 2,5/6.DA.
160T01027 051021 1SNC 160 001 C0205 Three level sensor terminal blocks without ground connection D 2,5/6.DAL1 D 2,5/6.DAL2 Spacing 6 mm +0,05 (.238") Spacing 6 mm +0,05 (.238") Three level block with LED indicator between upper and lower level (red 24V=) Three level block with LED indicator between lower levels (green 24V=) Screw clamp DIN 3 A 2 Colour Type Part numbers Colour Grey D 2,5/6.DAL1 1SNA 115 536 R0400 Characteristics End stop th. 12 mm BADH V2 1SNA 116 900 R2700 th.
160T01028 051021 1SNC 160 001 C0205 D 2,5/6.DPL1 D 2,5/6.DP1 Three level sensor terminal blocks with ground connection Spacing 6 mm +0,05 (.238") Spacing 6 mm +0,05 (.238") Screw clamp DIN 3 Three level block for input with ground and LED indicator A Three level block for sensor with ground on lower level . * Green/yellow marking on lower deck between upper and middle level (red 24V=). marking on lower deck * Green/yellow 2 Colour Type Grey D 2,5/6.
160T01029 051021 1SNC 160 001 C0205 D 2,5/6.DPA1 Three level sensor terminal blocks with ground connection D 2,5/6.DPAL1 Spacing 6 mm +0,05 (.238") Spacing 6 mm +0,05 (.238") Three level block for power with ground on lower level. Three level block for sensor with ground on lower level and LED indicator between upper and middle level (red 24V=) * Green/yellow marking on lower deck * Green/yellow marking on lower deck Screw clamp DIN 3 A 2 Colour Type Part numbers Colour Grey D 2,5/6.
160T01032 060529 1SNC 160 001 C0205 Terminal blocks for distribution boxes double-deck + protection D 4/6.NTLP D 4/6.NLP Spacing 6 mm +0,05 (.238") Spacing 6 mm +0,05 (.238") Screw clamp DIN 3 disconnect neutral feed-through ground D 4/6.NTLP A 3 circuits 3 Colour Type Part number 1 circuit : "disconnect neutral" with busbar connection 1 circuit : "feed-through" 1 circuit : "ground" connected to the rail D 4/6.
160T01033 060529 1SNC 160 001 C0205 Terminal blocks for distribution boxes double-deck + protection D 4/6.LLP D 4/6...L Spacing 6 mm +0,05 (.238") Spacing 6 mm +0,05 (.238") Screw clamp DIN 3 D 4/6.LLP 3 circuits neutral A feed-through ground 3 Colour D 4/6.NL Type Part number 2 circuits : "feed-through" 1 circuit : "ground" connected to the rail 2 circuits neutral feed-through D 4/6.LLP Grey V2 1SNA 110 441 R2400 D 4/6.
160T01034 060529 1SNC 160 001 C0205 Terminal blocks for distribution boxes double-deck + protection D 4/6.A.NTLP D 4/6.A.NLP Spacing 6 mm +0,05 (.238") Spacing 6 mm +0,05 (.238") 90 3.55" 90 3.55" feed-through 59 2.33" disconnect neutral 59 2.33" 51,5 2.03" DIN 3 51,5 2.03" Screw clamp ground center of rail A center of rail 43,5 1.72" D 4/6.A.NTLP 43,5 1.72" * * 3 circuits 3 Colour D 4/6.A.
160T01035 060529 Terminal blocks for distribution boxes double-deck + protection D 4/6.A.LLP D 4/6.A.LL Spacing 6 mm +0,05 (.238") Spacing 6 mm +0,05 (.238") Screw clamp DIN 3 D 4/6.A.LLP 3 circuits feed-through A feed-through ground 3 Colour D 4/6.A.LL 2 circuits feed-through feed-through Type Mainly suitable for medical equipment purposes. According to DIN 43880 standards (dimension above the rail 35 x 7,5 < 44 mm).
Notes 56 NOTE_56 051021 Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.
160T01036 060529 1SNC 160 001 C0205 D 4/6.LNTP1 Terminal blocks for distribution boxes double-deck + protection D 4/6.LNTP3 Spacing 17,8 mm + 0,2 (.700"+ .008") Spacing 17,8 mm + 0,2 (.700"+ .008") Closed terminal block Closed terminal block Screw clamp DIN 3 A 3 Colour Type Part number 3 circuits : "disconnect neutral" with busbar connection 3 circuits : "feed-through" 3 circuits : "ground" connected to the rail Blue, grey and D 4/6.
160T01037 060529 D 4/6.LNTP8 D 4/6.LNTP2 Terminal blocks for distribution boxes double-deck + protection Spacing 17,8 mm + 0,2 (.700"+ .008") Spacing 17,8 mm + 0,2 (.700"+ .008") Closed terminal block Closed terminal block Screw clamp DIN 3 A 3 Colour Type Part number 3 circuits : "neutral" 3 circuits : "feed-through" 3 circuits : "ground" connected to the rail Blue, grey and green-yellow V2 D 4/6.LNTP2 1SNA 110 327 R2100 Characteristics End stop th.
160T01038 051021 D 4/6.LNTP7 D 4/6.LNTP4 D 4/6.LNTP6 Spacing 17,8 mm + 0,2 (.700"+ .008") Spacing 17,8 mm + 0,2 (.700"+ .008") Spacing 17,8 mm + 0,2 (.700"+ .008") Closed terminal block Closed terminal block Closed terminal block A 3 Colour Type Part number Colour Type Part number 6 circuits : "feed-through" 3 circuits "ground" connected to the rail 6 circuits : "feed-through" 1 circuit "ground" connected to the rail Grey and green-yellow V2 Grey and green-yellow V2 D 4/6.
160T01041 051021 Interruptible terminal blocks for neutral circuit MA 2,5/5.NT M 4/6.NT Spacing 5 mm + 0,2 (.200") Spacing 6 mm + 0,05 (.238") Neutral block spacing 5 mm same size as MA 2,5/5 terminal block. Neutral block spacing 6 mm same size as M 4/6 terminal block. Screw clamp DIN 1 - 3 A 4 Colour Type Blue M 2,5/5.NT Part numbers Colour Characteristics End stop th. 9 mm BADL V0 1SNA 399 903 R0200 th. 10 mm BAM2 V2 1SNA 206 351 R1600 End stop th.
160T01040 051021 M 6/8.NT M 10/10.NT Spacing 8 mm - 0,05 (.315") M 16/12.NT1 Spacing 10 mm - 0,05 (.394") Neutral block spacing 8 mm same size as M 6/8 terminal block. Spacing 12 mm -0,1 (.473") Neutral block spacing 10 mm same size as M 10/10 terminal block. Neutral block spacing 12 mm same size as M16/12 terminal block. A 4 Colour Type Blue M 6/8.
160T01043 051021 Interruptible terminal blocks for neutral circuit M 16/12.NT M 35/16.NT Spacing 17 mm - 0,1 (.669") Spacing 12 mm - 0,1 (.473") Screw clamp DIN 1 - 3 A Interruptible neutral terminal block spacing 12 mm, same size as M 16/12 terminal block, compatible with busbar 15 x 6 mm. Closed block spacing 17 mm same size as M 35/16 terminal block. 4 Colour Type Blue M 16/12.NT Part numbers Colour Characteristics End stop th. 9 mm BADL V0 1SNA 399 903 R0200 th.
Notes 63 NOTE_63 051021 Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.
160T01112 051021 Ground terminal blocks not electrically connected to the mounting rail (isolated ground) MA 2,5/5.PI M 4/6.PI Spacing 5 mm + 0,08 (.200") M 4/6.3A.PI Spacing 6 mm + 0,05 (.238") Spacing 6 mm + 0,05 (.238") Screw clamp DIN 1 - 3 A Type 5 refer to the section "Special Applications" for part numbers and characteristics. Part number Type Part number Type Yellow body with green strip on the top 1SNA 165 677 R0300 MA 2,5/5.
160T01113 051021 Ground terminal blocks not electrically connected to the mounting rail (isolated ground) M 6/8.PI Spacing 8 mm - 0,05 (.315") M 10/10.PI M 16/12.PI Spacing 10 mm - 0,05 (.394") Spacing 12 mm - 0,1 (.473") Screw clamp DIN 1 - 3 A Type refer to the section "Special Applications" for part numbers and characteristics. Part number Type Part number Type Yellow body with green strip on the top 1SNA 165 451 R2100 M 6/8.
160T01122 051021 Terminal blocks snapped on mounting rail : instructions A 5 Snap the block on the mounting rail The snap-on terminal blocks cannot slide on the mounting rail. Ground terminal blocks electrically connected to the mounting rail D 2,5/5.P D 4/6.P Spacing 5 mm + 0,08 (.200") D 6/8.P Spacing 6 mm + 0,05 (.238") Spacing 8 mm - 0,05 (.315") Screw clamp DIN 3 2 R 1 Mounting on rail by spring. Type Part number Type Green body / yellow marking D 2,5/5.
160T01120 060106 Terminal blocks screwed on the mounting rail : instructions Screwdriver A 5 1. Position the block on the mounting rail 2. Screw down the center of the block to tighten the movable foot on the rail Screwed blocks can slide on the rail. Ground terminal blocks electrically connected to the mounting rail MA 2,5/5.P M 4/6.P M 4/6.3A.P Spacing 6 mm + 0,05 (.238") Spacing 5 mm + 0,08 (.200") Spacing 6 mm + 0,05 (.
160T01121 060529 Ground terminal blocks electrically connected to the mounting rail M 4/6.4A.P D 4/6.P.T1 Spacing 6 mm + 0,05 (.238") Spacing 6 mm + 0,05 (.238") M 6/8.P Spacing 8 mm - 0,05 (.315") Screw clamp DIN 1 - 3 R 2 1 A Type 5 Part number Type Green-yellow - UL 94 V0 M 4/6.4A.P.V0 refer to the section "Special Applications" for part numbers and characteristics.
160T01127 051021 Ground terminal blocks electrically connected to the mounting rail M 70/22.P M 95/26.P Spacing 22 mm -0,1 (.866") Spacing 26 mm -0,1 (1.02") Screw clamp DIN 1 - 3 (37,5x15) R 2 1 A Type Part number Green-Yellow M 70/22.P 1SNA 399 024 R2300 Type Part number 5 Green-Yellow M 95/26.P 1SNA 399 176 R0000 refer to the section "Special Applications" for part numbers and characteristics.
160T01042 051021 Ground + neutral terminal blocks Ground connected to the mounting rail and linked with a neutral block M 16/12.PE.N M 10/10.PE.N Spacing 20 mm - 0,2 (.787") Spacing 24 mm - 0,2 (.945") M 10/10.P block connected to M 10/10.N block through a removable jumper. M 16/12.P block connected to M 16/12.N block through a removable jumper. Screw clamp DIN 1 - 3 A 5 Colour Type Part numbers Colour Green-yellow/blue body M 10/10.PE.N 1SNA 165 683 R2200 Characteristics End stop th.
160T01044 051021 Ground terminal blocks electrically connected to the mounting rail and linked with a neutral block M 35/16.PE.N Spacing 32 mm - 0,2 (1.26") Screw clamp DIN 1 - 3 A M 35/16.P block connected to M 35/16.N block through a removable jumper. Colour Type Part numbers Colour Green-yellow/blue body M 35/16.PE.N Wire size IEC NFC DIN Rigid Flexible For ground blocks, connection with mounting rail : Recomm. screwdriver 5,5 mm .22" Recomm. torque 1 Nm 8.8 lb.
160T01055 051021 Heavy duty switch terminal blocks with blade MA 2,5/5.SNB MA 2,5/5.SNBT Spacing 5 mm (.197") Spacing 5 mm (.197") 5 mm block - Switch connection by blade 5 mm block - Switch connection by blade - Equipped with two test sockets DIA. 2 mm / .079" or 2.3 mm / .091" Screw clamp DIN 1 - DIN 3 A 6 NRTL/C NRTL/C Colour Type Part numbers Colour MA 2,5/5.SNB Grey / Orange 1SNA 115 699 R2000 Characteristics End stop th. 9 mm BADL V0 1SNA 399 903 R0200 th.
160T01056 051021 M 4/6.SNB M 4/6.SNBT... M 6/8.SNB Spacing 6 mm + 0,05 (.238") Spacing 6 mm + 0,05 (.238") Spacing 8 mm - 0,05 (.315") 6 mm block - Switch connection by blade 6 mm block - Switch connection by blade - Equipped with two test sockets DIA. 2 mm / .079" or 2,3 mm / .091" 8 mm block - switch connection by blade A Colour Type Grey/Orange Blue / Orange Orange / Orange Red / Orange Part numbers Colour M 4/6.SNB M 4/6.SNB M 4/6.SNB M 4/6.
160T01058 060106 Heavy duty switch terminal blocks with blade M 4/6.SNBT.4A Spacing 6 mm + 0,05 (.238") Double Screw clamp DIN 1 - DIN 3 A 6 mm block - switch connection by short blade equipped with 2 test socket screws DIA. 2 mm / .079" 6 Colour Type Grey / Orange Blue / Orange Part numbers M 4/6.SNBT.4A 1SNA 105 143 R2100 M 4/6.SNBT.4A 1SNA 400 288 R1700 Characteristics End stop th. 9 mm BADL V0 1SNA 399 903 R0200 th. 10 mm BAM2 V2 1SNA 206 351 R1600 End stop th.
160T01059 051021 Heavy duty switch terminal blocks with blade Double deck M 4/6.D2.SNBT Spacing 6 mm + 0,05 (.238") Screw clamp DIN 1 - DIN 3 A 6 mm block equipped with 4 test sockets DIA. 2 mm/.079" Switch on top circuit standard connection on bottom by short blade. Colour Type Grey 6 Part numbers M 4/6.D2.SNBT 1SNA 115 561 R1500 Characteristics End stop th. 9 mm BADL V0 1SNA 399 903 R0200 th. 10 mm BAM2 V2 1SNA 206 351 R1600 End stop th.
160T01123 051021 DOUBLE SWITCH TERMINAL BLOCKS WITH PULL LEVERS Change-over type blocks M 4/6.D2.S1R M 4/6.D2.S1R.T Double switch blocks M 4/6.D2.2S2 M 4/6.D2.2S2.T M 4/6.D2.2S2.
160T01114 051021 Heavy duty switch terminal blocks with contact control pull levers. Double deck double switch M 4/6.D2.2S2 M 4/6.D2.2S2.T.. Spacing 6 mm + 0,05 (.238") Spacing 6 mm + 0,05 (.238") max. height min. height Screw clamp DIN 1 - DIN 3 A center of rail 6 Closed block with 2 independent switching circuits. Black pull lever controls upper deck contact (black marking*). Grey pull lever controls lower deck contact. Color Type End stop th. 12 mm BADH V2 1SNA 116 900 R2700 th.
160T01115 051021 Heavy duty switch terminal blocks with contact control pull lever. Double deck change-over type M 4/6.D2.S1R M 4/6.D2.S1R.T Spacing 6 mm + 0,05 (.238") Spacing 6 mm + 0,05 (.238") max. height min. height Screw clamp DIN 1 - DIN 3 A center of rail 6 This closed block directs a signal either to the upper deck (contact control pull lever in high position), or to the lower deck (pull lever in low position) with just one operation. Color Type Part numbers Color M 4/6.D2.
160T01062 051021 Heavy duty switch terminal blocks with removable plug M 4/6.SNBT3 M 4/6.SNBTA Spacing 6 mm + 0,05 (.238") Spacing 6 mm (.236") 6 mm block - Switch connection by removable plug Equipped with two test socket screws DIA. 2 mm / .079". 6 mm block - Switch connection by removable plug Equipped with two test socket screws DIA. 2,3 mm / .090". Screw clamp DIN 1 - DIN 3 A End stop th. 9 mm BADL V0 1SNA 399 903 R0200 th. 10 mm BAM2 V2 1SNA 206 351 R1600 End stop th.
Notes 80 NOTE_80 051021 Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.
160T01116 051021 Selection guide for different types of plugs Types of fuses Switching function Types of plugs Block spacing 5 mm MA 2,5/5.SB Block spacing 6 mm M 4/6.SB M 4/6.SBT.4A M 4/6.D2.SB M 4/6.S Block spacing 8 mm M 6/8.SB M 6/8.
160T01063 051021 Heavy duty switch terminal blocks with plug MA 2,5/5.SB M 4/6.SB Spacing 5 mm (.197") Spacing 6 mm + 0,05 (.238") 5 mm block - switch connection by polarized plug delivered separately. 5 mm block - switch connection by polarized plug delivered separately. Screw clamp DIN 1 - DIN 3 A 6 End stop th. 9 mm BADL V0 1SNA 399 903 R0200 th. 10 mm BAM2 V2 1SNA 206 351 R1600 End stop th. 10 mm BAM2 V0 V0 1SNA 296 351 R0000 End stop 35 x 7,5 x 1 PR3.
160T01064 051021 BFAUTO M 6/8.SB MOUNTING Fuse holder plug for automotive "miniature" fuse Spacing 8 mm - 0,05 (.315") The fuse holder plug BFAUTO is a clever solution for a fuse application in a tight space : spacing 6 mm. The BFAUTO holds "miniature" automotive fuses type MINI ® Blade and can be plugged into ENTRELEC heavy duty switch terminal blocks spacing 6 mm. It can be used with Screw clamp and insulation displacement, ADO terminal blocks (see right column).
160T01117 051021 Heavy duty switch terminal blocks with plug M 4/6.SBT.4A Spacing 6 mm + 0,05 (.238") Double Screw clamp DIN 1 - DIN 3 A 6 mm block - switch connection by polarized plug delivered separately, equipped with 2 test socket-screws DIA. 2 mm. 6 Colour Type Grey Beige V0 M 4/6.SBT.4A 1SNA 115 555 R1700 M 4/6.SBT.4A.V0 1SNA 195 555 R1000 Part numbers Characteristics End stop th. 9 mm BADL V0 1SNA 399 903 R0200 th. 10 mm BAM2 V2 1SNA 206 351 R1600 End stop th.
160T01118 051021 Heavy duty switch terminal blocks with plug Double deck M 4/8.D2.SB M 4/6.D2.SB Spacing 6 mm + 0,05 (.238") Spacing 8 mm + 0,05 (.315") Screw clamp DIN 1 - DIN 3 6 mm block equipped with 4 test sockets DIA 2 mm. Switch connection by polarized plug on upper deck, delivered separately. Lower circuit is a continuous feed through. Colour Type Grey M 4/6.D2.SB Part number 1SNA 115 702 R2300 Characteristics End stop th. 12 mm BADH V2 1SNA 116 900 R2700 th.
160T01065 051021 Switch terminal blocks with plug M 4/6.S M 6/8.S Spacing 6 mm + 0,05 (.238") Spacing 8 mm - 0,05 (.315") 6 mm block - switch connection by polarized plug (delivered separately). 8 mm block - switch connection by polarized plug (delivered separately). Screw clamp DIN 1 - DIN 3 A 6 End stop th. 9 mm BADL V0 1SNA 399 903 R0200 th. 10 mm BAM2 V2 1SNA 206 351 R1600 End stop th. 10 mm BAM2 V0 V0 1SNA 296 351 R0000 End stop 35 x 7,5 x 1 PR3.
160T01066 060529 M 6/8.STP1 Heavy duty switch terminal blocks with push-turn knob M 6/8.STP2 Spacing 8 mm - 0,05 (.315") Spacing 8 mm - 0,05 (.315") M 6/8.STP with an orange push-turn knob - Can be sealed in the open and closed position. Block equipped with 2 test sockets DIA. 4 mm / .16". Switch connection by an orange push-turn knob (1/4 turn) which can be sealed in the open and closed position. Screw clamp DIN 1 - DIN 3 Part numbers Colour Colour Type Grey M 6/8.
160T01067 060529 Heavy duty switch terminal blocks with push-turn knob M 6/8.STP3 M 6/8.STP Spacing 8 mm - 0,05 (.315") Spacing 8 mm - 0,05 (.315") 8 mm non disconnect terminal block. Switch connection by a yellow push-turn knob (1/4 turn), white on top, sealed in the open position. Block equipped with 2 test sockets DIA. 4 mm / .16". Screw clamp DIN 1 - DIN 3 A 6 Colour Type Grey M 6/8.STP3 Part numbers Colour 1SNA 115 500 R2500 Characteristics End stop th.
Notes 89 NOTE_89 051021 Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.
160T01068 051021 Terminal blocks for metering circuits M 4/6.ST M 4/8,5.STI Spacing 6 mm (.236") Spacing 8,5 mm (.335") A Standard terminal block delivered without plug. M 4/6.ST block equipped with a keyed end section recommended for "current" circuits. Delivered without plug. 7 Colour Screw clamp DIN 1 - DIN 3 Type Part numbers Colour Tinned contact blades M 4/6.ST.Sn Grey M 4/6.ST.Sn.V0 Beige V0 Gold contact blades (2) M 4/6.ST.Au Grey M 4/6.ST.Au.V0 Beige V0 End stop th.
160T01069 051021 M 10/10.ST-Sn M 10/12,5.STI-Sn Spacing 10 mm (.394") Utilization of each type of plug Spacing 12,5 mm (.492") Number of operations : 200 On request, the plugs can be replaced by an insertable printed circuit for diagnosis testing. BNT1 ("voltage" plug) Red "Break before make" Red V0 Standard terminal block delivered without plug.
160T01070 051021 M 6/8.STA Terminal blocks for test circuits M 6/8.ST1 Spacing 8 mm - 0,05 (.315") Spacing 8 mm - 0,05 (.315") Screw clamp DIN 1 - DIN 3 center of rail A Switch connection by orange sliding link equipped with two test socket screws DIA. 4 mm / .16". 7 Colour Type Part numbers Colour M 6/8.STA M 6/8.STA V0 Grey Beige V0 1SNA 115 359 R0200 1SNA 195 359 R0300 Characteristics End stop th. 9 mm BADL V0 1SNA 399 903 R0200 th. 10 mm BAM2 V2 1SNA 206 351 R1600 End stop th.
160T01071 051021 M 6/8.ST3 M 6/8.ST6 Spacing 8 mm - 0,05 (.315") M 6/8.ST7 Spacing 8 mm - 0,05 (.315") Spacing 8 mm - 0,05 (.315") M 6/8.ST with partition on right and left for jumper bar. M 6/8.ST non interruptible (standard "feed-through" connection). center of rail M 6/8.ST with sliding link operated by an insulated rod, equipped with two test sockets DIA. 4 mm/.16" Colour Type Part numbers Colour M 6/8.ST3 M 6/8.
160T01076 051021 Terminal blocks for test circuits with insulated sliding bridge M 6/8.ST1.V2.IP20 Spacing 8 mm - 0,05 (.315") Screw clamp DIN 1 - DIN 3 center of rail A Switch connection by yellow sliding link operated by screw driver, equipped with 2 test socket screws DIA. 4 mm/.16". 7 Colour Type Grey V2 Beige V0 End stop th. 9 mm BADL V0 1SNA 399 903 R0200 th. 10 mm BAM2 V2 1SNA 206 351 R1600 End stop th. 10 mm BAM2 V0 V0 1SNA 296 351 R0000 End stop 35 x 7,5 x 1 PR3.
160T01074 051021 Terminal blocks for test circuits Screw clamp C.T. test diagram in a circuit with various equipments Current transformers with common point (applications) Mounting B Mounting C C.T.
160T01072 060106 Terminal blocks for test circuits M 10/10.ST1 M 10/10.ST1 Spacing 10 mm (.394") Spacing 10 mm (.394") Screw clamp DIN 1 - DIN 3 center of rail center of rail A M10/10.ST equipped with two test sockets DIA. 4 mm M10/10.ST equipped with two test sockets DIA. 4 mm 7 Colour Type Grey Beige V0 M 10/10.ST1 1SNA 115 924 R0100 Grey M 10/10.ST1.V0 1SNA 195 924 R0200 Grey Part numbers Colour Characteristics End stop th. 9 mm BADL V0 1SNA 399 903 R0200 th.
051021 D 6/10.SNBTB2 D 6/10.SNBTB1 82 3.22" closed center of rail center of rail Switching terminal block fitted with 2 DIA. 4 mm test sockets made for isolated plug (IP20). Notes The test sockets DIA.4 mm are made to be able to receive DIA. 4 mm isolated plug (IP20). Colour Type Grey D 6/10.
ESSAILEC terminal blocks The PREMIUM solution for testing the secondary circuits of current or voltage transformers. Characteristics and benefits : Great flexibility : ESSAILEC, approved by the major electricity utilities, remains the premium choice for the energy market. A 7 Implemented in the transformers secondary circuits, ESSAILEC thanks to its intelligent “make before break” design eases and secures any intervention. Cutting the energy supply is avoided with zero risk for the operator.
Notes 99 NOTE_99 051021 Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.
160T01077 051021 M 4/8.SF... Fuse holder terminal blocks for 5 x 20 mm and 5 x 25 mm fuses Screw clamp M 4/8.SFT Spacing 8 mm (.315") Spacing 8 mm (.315") Standard 8 mm block. M 4/8.SF equipped with two test sockets DIA. 2 mm/.079". DIN 1 - DIN 3 A 8 * Blocks with LED indicator are labeled "+" on the outside of the lever. The indicator can be reversed in the field if required. Colour Type Grey Orange Beige V0 M 4/8.SF M 4/8.SF2 M 4/8.SF.
160T01078 051021 M 4/8.SF... M 4/8.SF...T... M 4/8.SN... Spacing 8 mm (.315") Spacing 8 mm (.315") Spacing 8 mm (.315") M 4/8.SF with fusion indicator. M 4/8.SF with fusion indicator equipped with 2 test sockets DIA. 2 mm/.079". M 4/8.SF with disconnect link bar locked on grey grip. A Colour Type Diode LED 24/110 V (6) Grey body neon lamp(3) Diode LED 24 V* (4) Diode LED 48 V* (4) Diode LED 48 V (4)(5) M 4/8.SFD3 M 4/8.SFL M 4/8.SFD M 4/8.SFD1 M 4/8.
160T01079 051021 M 4/8 Fuse holder terminal blocks for 5 x 20 mm and 5 x 25 mm fuses Screw clamp M 4/8.SN... Spacing 8 mm (.315") Spacing 8 mm (.315") Terminal block compatible with fuse block M 4/8.SF M 4/8.SF with disconnect link bar locked on blue grip, equipped with 2 test sockets DIA. 2 mm / .079" Colour Type Coulour Grey M 4/8 DIN 1 - DIN 3 A 8 Part number 1SNA 115 523 R0700 Notes The use of some accessories may decrease the block's voltage rating. For more information, consult us.
160T01091 060529 Fuse holder terminal blocks Double-deck M 4/8.D2.SF M 4/8.D2.SF... Spacing 8 mm (.315") Spacing 8 mm (.315") Standard block. M 4/8.D2.SF with fusion indicator. for 5 x 20 and 5 x 25 mm fuses Screw clamp DIN 1 - DIN 3 A End stop th. 9 mm BADL V0 1SNA 399 903 R0200 th. 10 mm BAM2 V2 1SNA 206 351 R1600 End stop th. 10 mm BAM2 V0 V0 1SNA 296 351 R0000 End stop 35 x 7,5 x 1 PR3.
160T01108 060529 Fuse holder terminal blocks Double-deck M 4/8.D2.SF... M 4/8.D2 Spacing 8 mm (.315") Spacing 8 mm (.315") M 4/8.D2.SF with* or without fusion indicator. Internal jumpering option. Terminal block compatible with fuse block M 4/8.D2.SF. for 5 x 20 and 5 x 25 mm fuses Screw clamp DIN 1 - DIN 3 A (8) 8 Colour Type Part numbers Colour Grey M 4/8.D2.SFJ Blocks with fusion indicator : Grey/Neon 110-220 V* (5) M 4/8.D2.SFLJ Grey/LED 24 V* (6) M 4/8.D2.
160T01086 060529 MB 10/12.SF... Fuse holder terminal block with screwed plug MB 10/12.SF... Spacing 12 mm (.473") Spacing 12 mm (.473") for 5 x 20 mm or 5 x 25 mm fuses Screw clamp DIN 1 - DIN 3 A 12 mm block, no fusion indicator - for 5 x 20 mm or 5 x 25 mm fuses Colour Type Grey/5x20 mm Grey/5x25 mm Notes The use of some accessories may decrease the block's voltage rating. For more information, consult us.
060529 Fuse holder terminal blocks Double-deck D 4/8.D2.P.SF Spacing 8 mm (.315") grip closed for 5 x 20 and 5 x 25 mm fuses Screw clamp DIN 3 8 center of rail Output Load (ex. : solenoid value) A grip open 90° 160T01167 P L C Standard block. Colour Type Grey Grey Neon 110-230 V (5) Grey LED 24 V (6) D 4/8.D2.P.SF 1SNA 400 270 R2000 D 4/8.D2.P.SFL 1SNA 400 271 R1500 D 4/8.D2.P.SFD 1SNA 400 272 R1600 Part numbers Colour Type Part numbers Schield Application example End stop th.
160T01088 051021 MU 10/13.SF1 Fuse holder terminal blocks for 5 x 20 mm and 5 x 25 mm fuses Screw clamp MU 10/14,5.SF1 Spacing 13 mm (.512") Spacing 14,5 mm (.571") 13 mm block for fusion indicator (to be ordered separately). 14,5 mm block for fusion indicator (to be ordered separately). DIN 1 - DIN 3 A 8 End stop th. 9 mm BADL V0 1SNA 399 903 R0200 th. 10 mm BAM2 V2 1SNA 206 351 R1600 End stop th. 10 mm BAM2 V0 V0 1SNA 296 351 R0000 End stop 35 x 7,5 x 1 PR3.
160T01089 051021 MU 10/13.SF2 Fuse holder terminal blocks for 6,35 x 25,4 mm 1/4 x 1 in. and 6,35 x 32 mm 1/4 x 11/4 in. fuses Screw clamp MU 10/14,5.SF2 Spacing 13 mm (.512") Spacing 14,5 mm (.571") 13 mm block for fusion indicator (to be ordered separately). 14,5 mm block for fusion indicator (to be ordered separately). DIN 1 - DIN 3 A 8 Colour Type Black V0 End stop th. 9 mm BADL V0 1SNA 399 903 R0200 th. 10 mm BAM2 V2 1SNA 206 351 R1600 End stop th.
160T01090 051021 Switch terminal blocks with neutral cartridge MU 10/13.SN3 MU 10/14,5.SN3 Spacing 13 mm (.512") Spacing 14,5 mm (.571") 13 mm block with neutral cartridge locked on blue holder. 14,5 mm block with neutral cartridge locked on blue holder. Screw clamp DIN 1 - DIN 3 A 8 Colour Type Black/Blue V0 MU 10/13.SN3 Part numbers Colour 1SNA 199 021 R1000 Characteristics End stop th. 9 mm BADL V0 1SNA 399 903 R0200 th. 10 mm BAM2 V2 1SNA 206 351 R1600 End stop th.
160T01082 051021 ML 10/13.SF Fuse holder terminal blocks for 6,35 x 25,4 mm 1/4 x 1 in. and 6,35 x 32 mm 1/4 x 11/4 in. fuses Screw clamp ML 10/13.SN Spacing 13 mm (.512") Spacing 13 mm (.512") DIN 1 - DIN 3 A 13 mm block with disconnect link bar locked on blue lever. 13 mm standard block. 8 Colour Type Black V0 ML 10/13.SF Part numbers Colour 1SNA 199 095 R1300 Characteristics End stop th. 9 mm BADL V0 1SNA 399 903 R0200 th. 10 mm BAM2 V2 1SNA 206 351 R1600 End stop th.
160T01083 051021 ML 10/13.SFL... Fuse holder terminal blocks for 6,35 x 25,4 mm 1/4 x 1 in. and 6,35 x 32 mm 1/4 x 11/4 in. fuses ML 10/13.SFD... Spacing 13 mm (.512") Spacing 13 mm (.512") 13 mm block with neon fusion indicator. 13 mm block with LED fusion indicator. Screw clamp DIN 1 - DIN 3 A Colour Type Black V0/110-230V Black V0/480V ML 10/13.SFL ML 10/13.SFL1 Part numbers Colour 1SNA 199 168 R0000 1SNA 199 165 R2500 Characteristics End stop th. 9 mm BADL V0 1SNA 399 903 R0200 th.
160T01080 051021 for 6,35 x 32 mm 1/4 x 11/4 in. fuses Screw clamp M 10/16.SN M 10/16.SF... Fuse holder terminal blocks Spacing 16 mm (.630") Spacing 16 mm (.630") 16 mm block with or without fusion indicator. 16 mm block with disconnect link bar locked on blue holder. DIN 1 - DIN 3 A 8 Colour End stop th. 9 mm BADL V0 1SNA 399 903 R0200 th. 10 mm BAM2 V2 1SNA 206 351 R1600 End stop th. 10 mm BAM2 V0 V0 1SNA 296 351 R0000 End stop 35 x 7,5 x 1 PR3.
160T01084 051021 M 10/16.SF1 Fuse holder terminal blocks for 8,5 x 31,5 mm 11/32 x 11/4 in. fuses Screw clamp M 10/16.SN1 Spacing 16 mm (.630") Spacing 16 mm (.630") 16 mm block without fusion indicator. 16 mm block with disconnect link bar locked on blue holder. DIN 1 - DIN 3 A End stop th. 9 mm BADL V0 1SNA 399 903 R0200 th. 10 mm BAM2 V2 1SNA 206 351 R1600 End stop th. 10 mm BAM2 V0 V0 1SNA 296 351 R0000 End stop 35 x 7,5 x 1 PR3.
160T01085 060106 DL 10/17,5.SF Fuse-holder terminal blocks for 10,3 x 38 mm 13/32 x 11/2 in. fuses Screw clamp DL 10/17,5.SN Spacing 17,5 mm (.689") Spacing 17,5 mm (.689") 17,5 mm standard block. 17,5 mm block with disconnect link bar locked on grip. Blue marking on grip. DIN 3 A 8 Colour Type Grey/ black grip V0 Part numbers Colour DL 10/17,5.SF 1SNA 116 438 R1300 Characteristics End stop th. 9 mm BADL V0 1SNA 399 903 R0200 th. 10 mm BAM2 V2 1SNA 206 351 R1600 End stop th.
160T01106 051021 1SNC 160 001 C0205 MB 10/22.SF... Fuse-holder terminal blocks for 10,3 x 38 mm 13/32 x 11/2 in. fuses Screw clamp MB 10/22.SN Spacing 22 mm (.866") Spacing 22 mm (.866") DIN 1 - DIN 3 A 22 mm block with disconnect link bar locked on blue holder. 22 mm block with or without fusion indicator. Colour Type 8 Part numbers Colour Without fusion indicator : MB 10/22.SF Grey 1SNA 116 302 R2300 With fusion indicator to be ordered separately : MB 10/22.
160T01110 051021 1SNC 160 001 C0205 Fuse holder terminal blocks with screwed plugs MB 10/24.SF... MB 25/30.SF Spacing 24 mm (.950") Spacing 30 mm (1.180") 24 mm closed thermoset block for 10,3 x 38 and DO1 fuses. 30 mm closed block for DO2 fuses. for 10,3 x 38 mm 13/32 x 11/2 in. and DO1 - DO2 fuses Screw clamp DIN 1 - DIN 3 A 8 Colour Type Part numbers Colour Grey / white plug for 10,3 x 38 13/32 x 1 1/2 fuses 1SNA 116 299 R2000 MB 10/24.SF Grey / black plug for DO1 fuses MB 10/24.
160T01045 051021 1SNC 160 001 C0205 M 4/6.RS Safety connection terminal blocks M 6/8.RS Spacing 6 mm -0,05 (.236") Spacing 8 mm -0,05 (.315") Screw clamp DIN 1 - 3 center of rail Screw clamp terminal for bare wire or equipped with bent lug. Colour refer to the section "Special Applications" for part numbers and characteristics. End stop th. 9 mm BADL V0 1SNA 399 903 R0200 th. 10 mm BAM2 V2 1SNA 206 351 R1600 End stop th. 10 mm BAM2 V0 V0 1SNA 296 351 R0000 End stop 35 x 7,5 x 1 PR3.
160T01016 051021 1SNC 160 001 C0205 M 10/10.RS Safety connection terminal blocks Spacing 10 mm -0,05 (.394") Screw clamp DIN 1 - 3 A Screw clamp terminal for bare wire or equipped with bent lug. 9 Colour refer to the section "Special Applications" for part numbers and characteristics. Type Part numbers Colour 1 spring under each screw-clamp M 10/10.RS Grey M 10/10.
160T01105 060529 1SNC 160 001 C0205 Heavy duty switch terminal blocks with safety connection M 4/6.SNTS M 6/8.STP.RS Spacing 6 mm + 0,05 (.238") Spacing 8 mm - 0,05 (.315") M 4/6.SN equipped with 2 test socket screws DIA. 2 mm/.079" with pressure springs under wire clamp for bare wire or wire equipped with flat lug. Switch connection by a yellow push-turn knob (1/4 turn). Block equipped with 2 test sockets DIA. 4 mm/.
1SNC 160 001 C0205 D 6/8.ST1.RS Spacing 8 mm - 0,05 (.315") 15,1 78,4 3.08" DIN 3 59" 85,6 3.37" 15,1 85,6 3.37" center of rail center of rail 45 1.77" 45 1.77" Switch connection by yellow sliding link operated by screw driver, equipped with 2 test socket screws DIA. 4 mm/.16". Block equipped with pressure spring under the clamp for bare cable or equipped with bended ferrules. A 9 Colour Type 1SNA 115 831 R0400 Characteristics End stop th. 9 mm BADL V0 1SNA 399 903 R0200 th.
160T01095 060529 1SNC 160 001 C0205 M 4/6.DN... M 4/6.DL... Component holder terminal block With neon lamp indicator Double deck Spacing 6 mm + 0,05 (.238") Spacing 6 mm +0,05 (.238") 1 connection with 4 inputs on 2 decks. Equipped with a protected LED. 1 connection with 4 inputs on 2 decks. Equipped with a neon lamp. Colour Type Colour Grey 12 V = 24 V ~ Grey 24 V = 48 V ~ Grey 24 V = 48 V ~ M 4/6.DL2 M 4/6.DL3 M 4/6.
160T01111 060529 1SNC 160 001 C0205 Electronic component holder terminal blocks With diode Double deck M 4/6.DD... M 4/6.DE...D... Spacing 6 mm (.236") Spacing 6 mm (.236") Block equipped with two 1N 4007 diodes negative common (1000 V peak - 250 V service - 1 A). Block equipped with one 1N 4007 diode with two connections per anode and cathode (1000 V peak - 250 V service - 1 A) Typical lamp test application Compression clamp DIN 1 - 3 A 10 Type P/N BAMH th. 9,1 mm V2 1SNA 114 836 R0000 th.
160T01093 051024 1SNC 160 001 C0205 M 4/6.DE... Component holder terminal blocks Empty blocks M 4/6.DE1 Spacing 6 mm +0,05 (.238") Spacing 6 mm +0,05 (.238") Empty blocks for components (th. 5 mm max.). Internal, soldered connections, external, by Screw clamp. Empty blocks for components (th. 5 mm max.). Internal, soldered connections, external, by Screw clamp. Double deck blocks Screw clamp DIN 1 - 3 A 10 Colour Type Part numbers Colour Upper and lower circuit opened M 4/6.DE Grey M 4/6.
160T01094 060529 1SNC 160 001 C0205 M 4/6.DE2 Component holder terminal blocks With neon lamp indicator Empty blocks Double deck M 4/6.DL... Spacing 6 mm + 0,05 (.238") Spacing 6 mm + 0,05 (.238") Empty blocks for components (th. 5 mm maxi.). Internal, soldered connections, external, by Screw clamp. 1 connection with 4 inputs on 2 decks. Equipped with a nonprotected LED 24 V. Colour Colour Screw clamp DIN 1 - 3 A 10 Type P/N Upper circuit opened M 4/6.
1SNC 160 001 C0205 Electronic component-holder terminal blocks with potentiometer switch block with resistor M 4/7.R M 4/8.SF.R Spacing 7 mm (.276") Spacing 8 mm (.316") Screw clamp grip closed 051024 grip open 90° 160T01097 DIN 1 - 3 center of rail Block equipped with a variable resistor 20Ω ± 10 % to compensate for line resistance in measurement circuits. Part numbers Colour Colour Type Grey M 4/7.R 1SNA 115 291 R1700 Characteristics End stop th. 9 mm BADL V0 1SNA 399 903 R0200 th.
160T01096 060529 1SNC 160 001 C0205 Electronic component holder terminal blocks With resistor M 4/6.CA I/U - 250 M 4/6.CA I/U - 500 Spacing 6 mm (.236") Spacing 6 mm (.236") M 4/6 block equipped with a 250 Ω precision resistor and two DIA. 2 mm test sockets. For a 0-20 mA or 4-20 mA analog signal. M 4/6 block equipped with a 500 Ω precision resistor and two DIA. 2 mm test sockets. For a 0-20 mA or 4-20 mA analog signal. Screw clamp DIN 1 - 3 A 10 BAMH th. 9,1 mm V2 1SNA 114 836 R0000 th.
160T01102 1SNC 160 001 C0205 051024 Thermocouple terminal blocks MTC 6 Thermocouple terminal blocks Spacing 6 mm (.236") Screw clamp DIN 1 - 3 6 mm block for thermocouple wires. The thermocouple principle is based on the reaction of different metals to temperature. When thermocouple wires are terminated or connected, the Figure 1 : MTC 6 with shield connector "metal balance" must be maintained. The introduction of a foreign material (such as copper) results in loss of signal strength and integrity.
Notes 128 NOTE_128 051024 Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.
160T05005 060206 DR 1,5/4 Miniblocks for profil EN 50045 (DIN 46277/2) Screw clamp - Screw clamp DR 1,5/4.1 Spacing 4 mm (.157") Spacing 4 mm (.157") 28 31 DIN 2 A Standard block 4 mm with partition. Standard block 4 mm. 11 Color Type Part number 1SNA 110 106 R2500 1SNA 399 575 R0000 DR 1,5/4 DR 1,5/4.V0 Grey Grey V0 Characteristics Notes Some accessories can decrease the block's voltage rating. Consult us for information.
160T05001 060216 DR 1,5/5 Miniblocks for profil EN 50045 (DIN 46277/2) Screw clamp - Screw clamp DR 1,5/5.1 Spacing 5 mm + 0,08 (.200") Spacing 5 mm + 0,08 (.200") Standard block 5 mm. DR 1,5/5 with partition. DIN 2 A 11 Color Type Part number Characteristics refer to the section "Special Applications" for part numbers and characteristics. Notes Some accessories can decrease the block's voltage rating. Consult us for information.
160T05002 051024 DR 4/6 DR 4/6.1 DR 4/6.P Spacing 6 mm + 0,05 (.238") Spacing 6 mm + 0,05 (.238") Spacing 6 mm + 0,05 (238") Standard block 6 mm DR 4/6 with partition Terminal block for ground wire same size as DR 4/6 block. A 11 Color Type Grey Blue Part number DR 4/6 DR 4/6.N 1SNA 110 251 R0500 1SNA 120 251 R0700 Color Type Grey Blue DR 4/6.1 DR 4/6.1.
160T05013 051024 50 PLTVV Miniblocks Base mount Screw clamp - Screw clamp 61 NLTVV Spacing 5 mm (.197") Spacing 6 mm (.
160T05003 051024 DR 2,5/5.S... Switch miniblocks EN 50045 (DIN 46277 /2) rail (1) and NFC 93461 type 1 Screw clamp - Screw clamp Spacing 5,08 mm (.200") DIN 2 A 11 Color Type Part number Color Type Part number Grey DR 2,5/5.S 1SNA 112 097 R0500 1 switch connection by plug DR 2,5/5.S1 Grey 1SNA 112 098 R1600 DR 2,5/5.S equipped with 2 test socket-screws DIA. 2 mm - .
160T05004 051024 DR 4/8 SF Fuse-holder Terminal blocks Spacing 8 mm (.315") closed grip for 5 x 20 mm and 5 x 25 mm fuses EN 50045 (DIN 46277 /2) rail Compression clamp - Compression clamp DIN 2 A Standard 8 mm block. 11 Color Type Part number DR 4/8 SF Grey Characteristics Notes Some accessories can decrease the block's voltage rating. This block will be equipped with fusion indicator (24, 48, 115, 230, and 400 V rating).
Notes 135 NOTE_135 051024 Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.
160T05027 051024 DR 4/6.G Miniblocks for EN 50045 rail (DIN 46277 /2 ) Screw clamp - quick-connect Miniblocks for EN 50045 rail (DIN 46277 /2 ) Quick-connect - quick-connect Spacing 6 mm +0,05 (.238") DIN 2 DIN 2 A 11 Color Type Part number DR 4/6.G 1SNA 110 434 R1500 Grey Tag for 6.3 x 0.8 series 250 or 2.8 x 0.8 series 110 quickconnect tabs with vertical output. Characteristics Wire size IEC NFC DIN Rigid Flexible Screw End stop th.
160T05024 051024 DR 4/6.GG DR 1,5/5.H Miniblocks for EN 50045 rail (DIN 46277 /2) Screw clamp - soldered Spacing 6 mm + 0,05 (.238") Spacing 5 mm + 0,08 (.200) DIN 2 A 11 Color Type Part number Color Type DR 1,5/5.H DR 4/6.GG Grey 1SNA 110 435 R1600 2 tags for 6,3 x 0,8 series 250 or 2,8 x 0,8 series 110 quick-connect tabs. Grey Characteristics Characteristics Wire size Wire size IEC NFC DIN Screw UL Screw 2,8 x 0,8 : 1,5 mm² maxi. 6,3 x 0,8 : 2,5 mm² maxi.
160T05025 051024 DR 1,5/5.M Miniblocks for EN 50045 (DIN 46277/2) rail Screw clamp - wire wrapping Switch miniblocks for EN 50045 (DIN 46277/2) rail and NFC 93461 type 1 Screw clamp - soldered Spacing 5 mm +0,05 (.200") DIN 2 (1) DIN 2 A 11 Color Type Part number DR 1,5/5.M Grey 1SNA 112 235 R1300 1 wrapping pin 1 x 1 .039" x .039" Characteristics Wire size IEC NFC DIN Screw End stop th.
160T05026 060529 DR 2,5/5.SH1 DR 1,5/5.SHH1 Switch miniblocks for EN 50045 (DIN 46277/2) rail and NFC 93461 type 1 Soldered - soldered Spacing 6 mm + 0,05 (.238") Spacing 5 mm + 0,08 (.200) DIN 2 A 11 Color Type Color Part number 1SNA 112 100 R2100 Grey DR 2,5/5.SH1 1 switch junction per plug - 1 soldered output 3 x 0,8 mm with 2 test sockets DIA. 2 mm Type DR 1,5/5.SHH1 1SNA 112 102 R1700 Grey 1 switch junction per plug 1 soldered output 3 x 0,8 mm with 2 test socket DIA.