Cut Sheet

ManualsBrandsABB ManualsControl & AutomationInterface Relay, Plug-In, 8A, SPDT, 250VAC Rated, 120VAC Coil

Data sheet

Pluggable interface relays CR-P

Pcb relays

Pluggable interface relays are used for electrical

isolation, ampliﬁcation and signal matching

between the electronic controlling, e.g. PLC

(programmable logic controller), PC or ﬁeld bus

systems and the sensor / actuator level. They

don’t use additional internal protective circuits

and thus are overload-proof against short-time

variations like current or voltage peaks.

Characteristics

– Standard Pcb relays

– 9 different rated control supply voltages U

DC versions: 12 V, 24 V, 48 V, 110 V

AC versions: 24 V, 48 V, 110 V, 120 V, 230 V

– Output: 1 c/o (SPDT) contact (16 A) or 2 c/o (SPDT)

contacts (8 A), 2 c/o (SPDT) contact version optionally

equipped with gold contacts

– Cadmium-free contact material

– Suited for logical and standard sockets

– Width on socket: 15.5 mm (0.610 in)

– Pluggable function modules: reverse polarity protection/

free wheeling diode, LED indication, RC elements,

overvoltage protection

Approvals

ANSI/UL 508

CAN/CSA C22.2 No.14

VDE

EAC

CCC

RMRS

Marks

2CDC 291 045 F0004

Summary of content (10 pages)

PAGE 1
Data sheet Pluggable interface relays CR-P Pcb relays Characteristics –– Standard Pcb relays –– 9 different rated control supply voltages Us: DC versions: 12 V, 24 V, 48 V, 110 V AC versions: 24 V, 48 V, 110 V, 120 V, 230 V –– Output: 1 c/o (SPDT) contact (16 A) or 2 c/o (SPDT) contacts (8 A), 2 c/o (SPDT) contact version optionally equipped with gold contacts –– Cadmium-free contact material –– Suited for logical and standard sockets –– Width on socket: 15.5 mm (0.
PAGE 2
Order data Packing unit = 10 pieces 1 c/o (SPDT) contact: 250 V, 16 A Type Rated control supply voltage Us Order code CR-P012DC1 12 V DC 1SVR 405 600 R4000 CR-P024DC1 24 V DC 1SVR 405 600 R1000 CR-P048DC1 48 V DC 1SVR 405 600 R6000 CR-P110DC1 110 V DC 1SVR 405 600 R8000 CR-P024AC1 24 V AC 1SVR 405 600 R0000 CR-P048AC1 48 V AC 1SVR 405 600 R5000 CR-P110AC1 110 V AC 1SVR 405 600 R7000 CR-P120AC1 120 V AC 1SVR 405 600 R2000 CR-P230AC1 230 V AC 1SVR 405 600 R3000 2 c/o (SPDT) cont
PAGE 3
Accessories Function modules Type Rated control supply voltage Us Version Order code A1+, A2- 1SVR 405 651 R0000 Diode - Reverse polarity protection CR-P/M 22 6-220 V DC Diode and LED - Reverse polarity protection CR-P/M 42 6-24 V DC red, A1+, A2- 1SVR 405 652 R0000 CR-P/M 42V 6-24 V DC green, A1+, A2- 1SVR 405 652 R1000 CR-P/M 42B 24-60 V DC red, A1+, A2- 1SVR 405 652 R4000 CR-P/M 42BV 24-60 V DC green, A1+, A2- 1SVR 405 652 R4100 CR-P/M 42C 110 V DC red, A1+, A2- 1SVR 405 652 R9
PAGE 4
Sockets Type Version Connection Order code with protective separation screw 1SVR 405 650 R0000 CR-PLSx screw 1SVR 405 650 R0100 CR-PLC spring 1SVR 405 650 R0200 screw 1SVR 405 650 R1000 Logical sockets CR-PLS Standard socket CR-PSS Accessories for CR-P sockets CR-PH Plastic holder 1SVR 405 659 R0000 CR-PJ Jumper bar for sockets with screw connection 1SVR 405 658 R5000 Marker 1SVR 405 658 R0000 Markers CR-PM Functions Operating controls 1 Socket 1 2 2 Pluggable function module 3
PAGE 5
Electrical connection CR-P with 1 c/o (SPDT) contact Control supply voltage 11(21)-12(22)/14(24) Relay output 2CDC 292 001 F0004 A1-A2 Connection diagram CR-P with 2 c/o (SPDT) contacts A1-A2 Control supply voltage 11-12/14, Relay outputs 2CDC 292 008 F0004 21-22/24 Connection diagram Data sheet | Pluggable interface relays CR-P - 5
PAGE 6
Technical data Input circuit - Supply circuit A1-A2 DC coils AC Coils Rated control supply voltage Us Rated frequency 12 V DC - 24 V DC - 48 V DC 110 V DC Make voltage Break voltage Rated power (at 20 °C) Maxium voltage (at 55 °C) Coil resistance (at 20 °C) Tolerance of coil resistance 8.4 V DC 30.6 V DC 0.1 U s 0.4-0.48 W 360 Ω 10 % 16.8 V DC 61.2 V DC 0.1 U s 0.4-0.48 W 1440 Ω 10 % - 33.6 V DC 122.4 V DC 0.1 U s 0.4-0.48 W 5700 Ω 10 % - 77.0 V DC 280.
PAGE 7
Type Maximum switching (breaking) power AC-1 (resistive) rated load AC-1 without load Mechanical lifetime Electrical lifetime CR-P...2 4000 VA 2000 VA ≤ 100 mΩ Contact resistance Maximum operating frequency CR-P...1 600 switching cycles/h 72000 switching cycles/h > 3 x 107 switching cycles AC-1 (resistive) > 0.7 x 105 switching > 105 switching cycles cycles (8 A, 250 V) (16 A, 250 V) cos φ see reduction factor F Response time typ. 7 ms Release time typ.
PAGE 8
Technical diagrams Operating range of DC coil Ambient temperature [°C] 2CDC 292 038 F0204 Ambient temperature [°C] 2CDC 292 037 F0204 U/Us U/Us Operating range of coils Operating range of AC coil A unloaded contacts, coil temperature = ambient temperature B continued with Ith (16 A at CR-P ... 1 and 8 A at CR-P ... 2) loaded contacts coil heated with 1,1 x Us 1 at unloaded contacts 2 at 50 % rated load 3 at rated load Versions with 1 c/o (SPDT) contact (CR-P ...
PAGE 9
Power factor 2CDC 292 004 F0204 Reduction factor Reduction factor F at inductive AC load Versions with 1 or 2 c/o (SPDT) contacts (CR-P ... 1 and CR-P ...
PAGE 10
Contact us Document number 2CDC 117 001 D0204 (03/2015) ABB STOTZ-KONTAKT GmbH P. O. Box 10 16 80 69006 Heidelberg, Germany Phone: +49 (0) 6221 7 01-0 Fax: +49 (0) 6221 7 01-13 25 E-mail: info.desto@de.abb.com You can find the address of your local sales organization on the ABB home page http://www.abb.com/contacts -> Low Voltage Products and Systems Note: We reserve the right to make technical changes or modify the contents of this document without prior notice.