Cut Sheet

Data sheet | Pluggable interface relays CR-P - 7
Type CR-P...1 CR-P...2
Maximum switching (breaking) power AC-1 (resistive) 4000 VA 2000 VA
Contact resistance ≤ 100 mΩ
Maximum operating frequency rated load AC-1 600 switching cycles/h
without load 72000 switching cycles/h
Mechanical lifetime > 3 x 10
7
switching cycles
Electrical lifetime AC-1 (resistive) > 0.7 x 10
5
switching
cycles
(16 A, 250 V)
> 10
5
switching cycles
(8 A, 250 V)
cos φ see reduction factor F
Response time typ. 7 ms
Release time typ. 3 ms
*) Those ratings are based on different type tests but they are not covered by the cULus or CSA approvals
Isolation data
Type CR-P...1 CR-P...2
Rated insulation voltage 400 V AC
Insulation class C250 / B400
Rated impulse withstand
voltage U
imp
between coil and contacts 5 kV AC
between open contacts 1 kV AC
between c/o (SPDT) contacts - 2.5 kV AC
Clearance between coil and contacts ≥ 10 mm
Creepage distance between coil and contacts ≥ 10 mm
Overvoltage category III
Pollution degree 3
General data
Type CR-P...1 CR-P...2
Dimensions (W x H x D) when mounted 12.7 x 29 x 15.7 mm (0.500 x 1.142 x 0.618 in)
Weight 14 g (0.031 lb)
Type of connection by socket
Mounting on socket (see accessories)
Mounting position any
Degree of protection IP 67
Environmental data
Type CR-P...1 CR-P...2
Ambient temperature range operation DC: -40...+85 °C; AC: -40...+70 °C
storage -40...+85 °C
Vibration resistance (10-150 Hz) n/o contact 10 g
n/c contact 10 g 5 g
Shock resistance n/o contact 30 g 20 g
n/c contact 30 g 20 g
Standards
Type CR-P...1 CR-P...2
Product standard IEC/EN 60255-23, IEC/EN 60664-1, IEC/EN 61810-1
Low Voltage Directive 2006/95/EC