User's Manual

Chapter 3  Installing the Tropos 3210 Wi-Fi Cell
Tropos Networks 3210 Hardware Installation Guide 14
Secure Mounting
To mount Tropos 3210 Wi-Fi cell on a wall
1. Select a mounting orientation for the cell.
2. Locate two studs on the wall using the stud finder. The cell should be mounted midway
between the two studs.
3. Drill four holes in the wall to accommodate the mounting brackets.
4. Push the four wall anchors into the four holes.
5. Screw the mounting brackets to the wall.
6. Screw the cell to the mounting brackets.
7. Perform a trial installation of the antennas or antenna cables, depending on your installation.
trp_011
After fastening
brackets to wall,
use Torx screws
to attach brackets
to cell