User's Manual

Chapter 4  Operating the Tropos 3210 Wi-Fi Cell
Tropos 3210 Wi-Fi Cell Hardware Installation Guide 20
Preparing the Configuration Utility
Before you can access the Tropos Configuration Utility, you must set the IP address and subnet
mask on your computer, as described in the following steps:
1. From the Start button, select Setting > Network and Dial-Up Connections.
The Network and Dial-up Connections folder opens.
2. Right-click on the Ethernet interface for your PC (for example 10-Base-T).
3. Select Properties.
The Properties dialog box for your interface opens.
4. Select Internet Protocol (TCP/IP), and click Properties.