User's Manual
Table Of Contents
- Contents
- Installing the Tropos 5210 Wi-Fi Cell
- Preparing for Installation
- Mounting Strategies
- Proper Use of Hose Clamps
- Mounting Instructions
- Streetlight Mounting
- Connecting Cable Attached Antennas
- Grounding the Tropos 5210 Wi-Fi cell
- Connecting Power
- Connecting a Data Port
- Resetting the Cell
- Connecting Peripherals
- Battery Backup Operation
- Safety Information for the Tropos 5210 Wi-Fi Cells
- Service Instructions
- A Power Consumption
- B Product Specifications
- C Approved Antenna Configurations
- D Installation Accessories
- E AC Wiring Diagrams
- F Wind Loading Considerations
- Index
Connecting Cable Attached Antennas
Tropos 5210 Wi-Fi Cell Installation Guide 21
5. Apply two drops of Loctite Threadlocker 242 to the antenna connector thread.
6. Locate the self-fusing EPR waterproofing tape included in the antenna installation kit.
7. Separate the liner from the tape.
8. Pre-stretch the tape and wrap it tightly around the connector.
Figure 12 Replacing Tropos 5210 Wi-Fi cell Antennas
trp_103
Aux
Tx/Rx antenna
Main
Tx/Rx antenna