User's Manual
Table Of Contents
- Contents
- Installing the Tropos 5210 Wi-Fi Cell
- Preparing for Installation
- Mounting Strategies
- Proper Use of Hose Clamps
- Mounting Instructions
- Streetlight Mounting
- Connecting Cable Attached Antennas
- Grounding the Tropos 5210 Wi-Fi cell
- Connecting Power
- Connecting a Data Port
- Resetting the Cell
- Connecting Peripherals
- Battery Backup Operation
- Safety Information for the Tropos 5210 Wi-Fi Cells
- Service Instructions
- A Power Consumption
- B Product Specifications
- C Approved Antenna Configurations
- D Installation Accessories
- E AC Wiring Diagrams
- F Wind Loading Considerations
- Index
Connecting Power
Tropos 5210 Wi-Fi Cell Installation Guide 28
Note
The Tropos 5210 Wi-Fi cell is equipped with additional AC surge protection and dual fuse
branch circuit protection. Additional ISA branch circuit protection is not required in the
upstream power distribution.
Figure 17 Connecting the AC Power Cable to the Cell
Connecting to Streetlight Power (Category C)
The power connections for Category C streetlight power are shown in Figure 18. Use the 3-
prong NEMA twist-lock adapter with twist-lock style photoelectric controls for outdoor lighting
commonly used by utilities. The NEMA twist-lock adapter can be used only with UL 773 listed
outdoor lighting controls rated for and operated at 90 to 480 VAC 50/60 Hz.
trp_107
Tighten nut to secure
power connection