User's Manual
Table Of Contents
- Contents
- Installing the Tropos 5210 Wi-Fi Cell
- Preparing for Installation
- Mounting Strategies
- Proper Use of Hose Clamps
- Mounting Instructions
- Streetlight Mounting
- Connecting Cable Attached Antennas
- Grounding the Tropos 5210 Wi-Fi cell
- Connecting Power
- Connecting a Data Port
- Resetting the Cell
- Connecting Peripherals
- Battery Backup Operation
- Safety Information for the Tropos 5210 Wi-Fi Cells
- Service Instructions
- A Power Consumption
- B Product Specifications
- C Approved Antenna Configurations
- D Installation Accessories
- E AC Wiring Diagrams
- F Wind Loading Considerations
- Index
Connecting a Data Port
Tropos 5210 Wi-Fi Cell Installation Guide 32
RJ45 jack for port connection. Figure 20 shows the layered shield and jacket for the data cable,
which must be removed to expose the inner cable and twisted pairs.
Figure 19 Options for Connecting a Data Port
Figure 20 Data Cable Detail
trp_111
Watertight bulkhead
cable glands
Wires exposed for
punch-down block
Cable terminated with
RJ45 jack for port
connection
O-ring
Shield
termination
trp_117
Watertight bulkhead
cable glands
Cable
Outer
jacket
Twisted
pairs
Securely tighten gland
for weathertight seal
Conductive
shield
Belfoil
shield
Terminate cable shield
at cable gland