User's Manual
Table Of Contents
- Contents
- List of Figures
- List of Tables
- 1 Installing the Router
- 2 Power Consumption
- 3 Product Specifications
- 4 Antenna Information
- 5 Installation Accessories
- 6 Wind Loading Considerations
- Index
Pole, Tower, and Streetlight Mounting Instructions
Tropos MetroMesh Routers Installation Guide, Models 6310 and 6320 14
Mount the router on a wood pole
1. Select a mounting location. You can attach the router to any outdoor wood pole of diameter
at least 1 inch.
2. Attach the pole bracket to the pole by threading a 1/4-inch bolt through the hole in the clamp
slot to the pole. The bolt should be at least 3 1/2 inches in length. Make sure that the bracket
is level.
3. Attach the mounting bracket of the router to the pole bracket with two 5/16-inch machine
screws (refer to Figure 4 for the correct orientation):
Insert one screw through the hole at the top of the mounting bracket to the hole at the top
of the pole bracket.
Insert the other screw through the curved slot track in the mounting bracket to the hole in
the middle of the pole bracket just above the clamp slot.
4. Level the mounting bracket by rotating the unit along the curved slot tracks. Tighten the
screws.
5. Place the upright router onto the top of the mounting bracket, as shown in Figure 5 on page
12. Secure the mounting bracket to the router by attaching two 5/16-inch machine screws
through the holes in the mounting bracket tabs to corresponding holes on the bottom of the
router.
To continue installing the router, see “Connecting Data Cables” on page 18.