Cut Sheet

Description: CU 112.5KVA 208-480Y 150C DOE16 K1 STD
UPC No 783173906996
Home > Transformers > Dry Type Vented > Electrostatic Shield
GE Type QL transformers meet DOE 2016 efficiency standards. They are available with aluminum or copper
windings and utilize a UL recognized 220 C insulation system. Quiet Performance-Outward-facing mounting
feet-Lug kit included-Ground bar kit included-Core and coil assemblies are mounted on rubber isolation pads
to reduce noise-Bolted coil terminations-Single-piece front/back is easily removable for service-NEMA 2 drip-
proof enclosure is standard, weathershield kits are available for conversion to NEMA 3R outdoor configuration-
Qualified to the s eismic req uirement s of IEEE-6 93-2005 and IBC-2012 and CBC 2013-Copper or aluminum
windings-Copper ground strap-Robust packaging with top and side protection protects against shipping
damage-Accessible mounting flanges with front/back slotted mounting holes make installation easier-
100PERC factory tested for shorts and coil integrity, current and loss, voltage, impedance and noise. Clear,
comprehensive documentation and labeling 1345G036996
Catalog No. 9T10C1345G03
Representative Image
Descriptors
Category Electrostatic Shield
Specifications
Phase 3
PriVoltage 208
SecVoltage 480Y/277
KVA 112.5 KVA
Coil Material CU
TempRise 150.0 °C
Frequency 60 Hz
AmbTemp 40.0 °C
EnergyEfficiency DOE 2016
KFactor K1
Enclosure Type NEMA 2
Sound Std
GSA Compliance No
Classifications
CE 0
Page No. 1
geindustrial.com Created on: 10/01/2019
Catalog No. 9T10C1345G03