User`s manual

Parameter listing and descriptions 299
ACH550-01 User's Manual
5307 EFB CRC ERRORS 0…65535
Contains a count of the messages with a CRC error received by the
drive. For high counts, check:
• Ambient electro-magnetic noise levels – high noise levels generate
errors.
• CRC calculations for possible errors.
5308 EFB UART ERRORS 0…65535
Contains a count of the messages with a character error received by the
drive.
5309 EFB STATUS 0…7
Contains the status of the EFB protocol.
0 = IDLE – EFB protocol is configured, but not receiving any messages.
1 =
EXECUT INIT – EFB protocol is initializing.
2 =
TIME OUT – A time-out has occurred in the communication between
the network master and the EFB protocol.
3 = CONFIG ERROR – EFB protocol has a configuration error.
4 =
OFF-LINE – EFB protocol is receiving messages that are NOT
addressed to this drive.
5 = ON-LINE – EFB protocol is receiving messages that are addressed to
this drive.
6 =
RESET – EFB protocol is performing a hardware reset.
7 =
LISTEN ONLY – EFB protocol is in listen-only mode.
5310 EFB PAR 10 0…65535
Protocol specific. See manuals Embedded Fieldbus (EFB) Control
(3AFE68320658 [English]) and BACnet® Protocol (3AUA0000004591
[English])
5311 EFB PAR 11 0…65535
See parameter 5310.
5312 EFB PAR 12 0…65535
See parameter 5310.
5313 EFB PAR 13 0…65535
See parameter 5310.
5314 EFB PAR 14 0…65535
See parameter 5310.
5315 EFB PAR 15 0…65535
See parameter 5310.
5316 EFB PAR 16 0…65535
See parameter 5310.
5317 EFB PAR 17 0…65535
See parameter 5310.
5318 EFB PAR 18 0…65535
See parameter 5310.
Code Description Range