User`s manual
78 Start-up and control panel
ACH550-01 User's Manual
The table below lists the tasks of the assistants. The order of
tasks presented by the Start-up assistant depends on your
entries. The following task list is typical.
4 Change the values
suggested by the assistant
to your preferences and
then press SAVE after
every change.
Pressing EXIT stops the
assistant.
5 After the assistant has
completed the task, you
can select another
assistant from the menu or
exit the Assistants mode.
Task name Description
Spin the motor • Prompts for the control panel display
language selection
• Prompts for motor data
• Guides user through the rotation check
Commission drive • Prompts for motor data
Application • Prompts for the application macro selection
References 1 & 2 • Prompts for the source of speed references 1
and 2
• Prompts for reference limits
• Prompts for frequency (or speed) limits
Start/Stop Control • Prompts for the source of the start and stop
commands
• Prompts for the start and stop mode
definition
• Prompts for acceleration and deceleration
times
Protections • Prompts for current and torque limits
• Prompts for the use of Run enable and Start
enable signals
• Prompts for the use of the emergency stop
• Prompts for the Fault function selection
• Prompts for the Auto reset functions
selection
1103 REF1 SELECT
PAR EDIT
AI1
[1]
OFF
EXIT SAVE00:00
ASSISTANTS 4
EXIT
SEL00:00
OFF
Spin the motor
Commission drive
Application
References 1 & 2
Start/Stop Control