Installation Manual

ACS550-PD 3R Irrigation Packaged Drive 9
Preparing for Installation (Supplement to ACS550-U1 User’s Manual)
Drive Identication
Toidentifythetypeofdeviceyouareinstalling,refertothetypecodenumberonthe
deviceidenticationlabel.
• Wallmountingbasedrives–labelattachedonthesidesurfaceoftheheatsink.
• Packageddrive–labelattachedtooutsidesurfaceontheleftideoftheenclosure.
• Enclosurewithhingedcover/door–labeloninsidesurfaceofthecover/door.
Type Code Number
Usethefollowingtointerpretthetypecodefoundontheidenticationlabel.
ACS550-PD-015A-4 +C192
AC Drive = 550 Product Series
Construction
PD=Drivewithdisconnectswitch

Output current rating (Seeratingschartfordetails)
Voltage rating
2=230VAC
4=480VAC
Enclosure protection class
+C192=3RStockIrrigationDrive
Ratings and Frame Size
Chartsinthe“Ratings”
sectionsoftheACS550-U1User’sManualandthismanuallist
technicalspecications,andidentifythedrive’sframesize.
Note! Someinstructionsinthisdocumentvary,dependingonthedrive’sframesize.
ToreadtheRatingstable,youneedthe“Outputcurrentrating”entryfromthetype
code(seeabove).