Installation Manual

Table Of Contents

Delivery check

Contents of the package: mounting platform, nut, control panel cable. Check that all items are present and

there are no signs of damage.

Technical data

Degree of protection: IP65. Control cable length: 3 m.

Installation instructions

1. Cut a hole in the cabinet door. See the Dimension drawings on next page.

2. Remove the locking nut and insert the mounting platform into the hole.

3. Put the control panel cable through the locking nut and the mounting panel hole.

4. Tighten the locking nut.

5. Attach the control panel.

Options for ABB drives, converters and inverters

Installation guide

DPMP-02/03 mounting platform for ACS-AP-X control panels

PAGE 1
Options for ABB drives, converters and inverters Installation guide DPMP-02/03 mounting platform for ACS-AP-X control panels Delivery check Contents of the package: mounting platform, nut, control panel cable. Check that all items are present and there are no signs of damage. Technical data Degree of protection: IP65. Control cable length: 3 m. Installation instructions 1. 2. 3. 4. 5. Cut a hole in the cabinet door. See the Dimension drawings on next page.
PAGE 2
Dimension drawings Cabinet door thickness: 1.5…30 mm (0.059…1.18 in) Cutting hole diameter in the cabinet door: 22.3 [0.78] http://www.abb.com/drives http://www.abb.com/solar http://www.abb.