Instruction Manual

Table Of Contents

Document type Document identity Revision Page(s)

Instruction manual for MACHsense-R - MSR1600 1MZB100400 A 11(31)

We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without

express authority is strictly forbidden.

4.2 Europe compliance

Caution: RoHS and REACH Confirmatory Statement

The documentation for this device complies with technical documentation for the assessment of electrical

and electronic products with respect to the restriction of hazardous substances as per EN 50581:2012.

· Failure to observe and follow the instructions provided with the equipment and accompanying

manuals could cause permanent damage to the equipment and could lead to property damage,

personal injury and/or death.

· Before attempting to use the equipment, you should review this instruction manual in its entirety,

including all caution and danger indicators.

· If the equipment is used in a manner not specified by the manufacturer or functions abnormally,

proceed with caution. Otherwise, the protection provided by the equipment may be impaired and

could result in improper operation and injury.

· Installation and service personnel must be familiar with general device test practices, electrical

awareness and must take proper safety precautions when installing and/or servicing the

equipment.

· Before performing installation, inspections, tests or maintenance on this device or associated

circuits, all live circuits and sources of electric power to said device and circuits must be isolated

or disconnected.

· Failure to shut off equipment prior to removing power connections could expose you to dangerous

voltages that could cause injury or death.

· All electrical equipment should be properly grounded and must have a reliable and

uncompromised grounding path. Equipment grounds should be properly bonded and connected

to the facility’s primary ground system for primary power.

· At all times, equipment must be properly grounded during device operation, maintenance and

service.

· All electrical connections and grounds must comply with all applicable laws, regulations and

electrical codes.

· Personal Protection Equipment shall be used to avoid injury. Safety shoes, safety hard hat,

protective goggles, ear protectors, gloves are recommended.

· When working with chemicals, you should get the safety data sheet from the supplier’s web page.

For more information regarding MACHsense-R, please visit www.abb.com

For answers not found in the support centre website or for product assistance, please contact

support.machsense@abb.com or the ABB Local Service Centre or ABB Contact Centre.