Product range E 210 On-off switches , pushbuttons , indicator lights ® System pro M compact Power and productivity for a better world TM ABB
Half-size Strong effect The new 9 and 18 mm wide ABB modular command or control devices for DIN 35 mm mounting rail attachment in the system pro M compact ® design. ABB modular command or control devices can be used in the SMISSLINE socket system (without contact to the bus bar).
Contents Applications Page 0/4 Sample applications Page 1/1 Characteristics Product range E 210 Page 2/1 Device overview Page 3/1 Ordering data Page 4/1 Technical data Page 5/1 Dimensions Page 6/1 Approval and standards Page 7/1 Technical catalogue | System pro M compact® 0/3
Applications On-off switches, pushbuttons, indicator lights Using modular DIN-rail mounted devices (MDRC) such as On-Off switches, pushbuttons and indicator lights makes it possible to switch and control electric loads from a central location. Thanks to signalling of the switch position, operating states can be recognized easily and users haven an overview of the situation. Space is saved in the distribution board thanks to the new narrow width of only 9 mm (0.5 modular width).
Integration of modular installation devices (on-off switches, pushbuttons and indicator lights) in the subdistribution board affords the additional advantage of intelligible signalling of electric loads‘ operating states. Easy operation or interpretation of devices is ensured by the clearly recognizable switching position (toggle lever) and / or a status display by means of an LED light.
Sample applications On-off switches and control switches Additional garden lighting On-off switches E211-16-20 (2NO contacts) and indicator lights E219-D – On-off control for additional garden light – The green indicator light in the cetral distribution board shows whether the garden light is ON or OFF Room ventilator with status display Control switches E218-25-31 (3NO + 1NC contacts) and E219-D48; E219-C48 – On-off function control of a ventilator – Integrated signal lamp 24 V for status det
Change over switches and group switches Flap gate control Change over switches E213-16-001 with position I-II (1CO contact) and E219-G; E219-B – Contol of a manual flap gate position with central visualization – The blue indicator light shows that the flap gate is open – The white indicator light shines in closed state Electrical room heater Group switches E214-16-101 with position I-0-II (1CO contact) and E219-E; E219-G – Changeover switching of manual control to time switch mode, e. g.
Sample applications Push buttons Room lighting (fluorescent-tubes) Pushbuttons mit 1NO contact (impulse) with geen LED – Lighting system with latching relay (impulse switching relais) – The green LED which is integrated in the pushbutton shines when the lighting group has the status ON 1/3 Sample applications | Technical catalogue
Multiple indicator lights L1 L1 L2 L2 L3 L3 N N PE PE L1 L1 N N L3 L3 L2 L2 Network and phase control Multiple indicator lights E219-3D (3x green LEDs) – All LEDs shine Net is working – If one phase breaks down, the green LED turns off Attention! Phase break down in the network L1 L1 L2 L2 L3 L3 N N PE PE 2 4 6 97 95 98 96 N 2 6 95 98 96 N M 3~ M 3~ Signaling motor OFF 4 97 X4 X4 X2 X2 Signaling motor ON Motor status display Multiple indicator
Sample applications Multiple indicator lights L1 L1 L2 L2 L3 L3 N N PE PE L1 L1 2 4 6 97 95 98 96 N 2 6 95 98 96 N M 3~ M 3~ Signaling motor OFF 4 97 L3 L3 L2 L2 Signaling motor ON Motor status display Multiple indicator lights E219-3CDE (1x green, 1x yellow, 1x red LED) – ABB polyphase contact gate (remote control) with 2 auxiliary contacts (1NO + 1NC) – The current operating mode of the motor drive is visualized over contactor auxiliary contacts – The error i
L1 L2 L3 N PE L1 2 4 6 97 95 98 96 N M 3~ L3 L2 Signaling motor interference on basis of thermal overload Motor status display (off and interuption) Multiple indicator lights E219-3CDE (1x green, 1x yellow, 1x red LED) – A thermal activation is signalized by the use of motor protection relay contacts – Motor off = green LED on; closed motor protection relay contact = yellow LED shows interference Technical catalogue | Sample applications 1/6
Characteristics On-off switches, change over switches and group switches The On-Off switches, pushbuttons and indicator light units open up new space-saving and modern installation possibilities. The units are for switching, controlling or signalling part of electrical systems or specific items of equipment. The new Series E210 units are available in widths of 9 mm (0.5 modular width) or 18 mm (1.0 modular width).
Control switches, pushbuttons and indicator lights Control switches, 16 A and 25 A The control switches are used in electric control cabinets or house distribution boards. They offer universal possibilities of use with their diverse variants. They perform the task of forwarding control commands. Module width depends on the contact configuration. 1 + 2 switching contacts = 9 mm (0.
Characteristics multiple indicator lights Multiple indicator lights with 2 or 3 LEDs These indicator lights are perfectly suited to the visualisation of on and off states. These devices can be used in private electrical equipment, commercial buildings or industrial switchgears. This application can be implemented in the smallest space in the apartment or control distributor.
Set new standards in your electrical distribution board The reduced device width saves space while providing the same functionality and improved performance The B 9 mm solution from AB More space plus improved performance Technical catalogue | Characteristics 2/4
Characteristics Special features Switch position clearly recognisable Fast mounting Easily accessible with latching function Indicator lights 5 different colours (red, green, yellow, blue, white) Cross-head recessed screws Pozidrive 1 ( captive ) Can be used in the SMISSLINE socket system Reliable connection terminals with integrated shutter Pushbutton 6 different colours (grey, red, green, yellow, black, blue)
Impressive solutions at a glance On-off switches, pushbuttons, indicator lights – Touch protection to DIN EN 50274 (DIN VDE0660 Part 514) – Reliable and convenient operation – Colour-fast LEDs: 5 colours for luminous pushbuttons and indicator lights – LED voltage ranges: 12-48 VAC/DC; 115-250 VAC; 60-220 VDC – Multiple indicator lights with 2 or 3 LEDs – Maintenance-free LED light source (up to 100,000 h) – Consistent innovative design – Dissipated power optimised – Compliance with international standards
Device overview On-off switches, change over switches, group switches, control switches On-off switches On-off switches with LED Change over switches Group switches Control switches 3/1 Device overview | Technical catalogue
Pushbuttons, indicator lights and accessories Pushbuttons Pushbuttons with LED Indicator lights Accessories for 9 and 18 mm Dummy housings (attachable) Padlock Technical catalogue | Device overview 3/2
Ordering data On-off switches On-Off switches, 16 A, 25 A and 32 A Contact Rated Power LED config. volt- loss Width Order data Product No. colour Bbn Weight Pack. 7612270 per unit unit age VAC W Rated current = 16 A mm Type EAN kg unit 1 NO 250 0.32 - 9 E211-16-10 2CCA703000R0001 938575 0.035 10 2 NO 250,400 0.82 - 9 E211-16-20 2CCA703005R0001 938582 0.045 10 3 NO 250,400 1.14 - 18 E211-16-30 2CCA703010R0001 938599 0.
Change over switches and group switches Change over switches, 16 A and 25 A Contact Rated Power LED config. volt- loss Width Order data Product No. colour Bbn Weight Pack. 7612270 per unit unit age VAC W Rated current = 16 A mm Type EAN kg unit 1 CO 250 0.32 - 9 E213-16-001 2CCA703040R0001 938698 0.041 10 2 CO 250 0.82 - 18 E213-16-002 2CCA703045R0001 938704 0.082 10 Rated current = 25 A 1 CO 250 0.
Ordering data Control switches and pushbuttons Control switches, 16 A and 25 A Contact Rated Power LED config. volt- loss Width Order data Product No. colour Bbn Weight Pack. 7612270 per unit unit EAN kg unit age VAC W mm Type Rated current = 16 A 1NO+1NC 250 0.50 - 9 E218-16-11 2CCA703050R0001 938773 0.041 10 2NO+2NC 250 1.00 - 18 E218-16-22 2CCA703060R0001 938780 0.082 10 3NO+1NC 250 1.50 - 18 E218-16-31 2CCA703065R0001 938797 0.
Pushbuttons with LED Pushbutton, 16 A, lit - 5 different LED colours (Pulse contact operation) Contact Rated Power LED config. volt- loss Width Order data Product No. Bbn Weight Pack. 7612270 per unit unit Type EAN kg unit colour age VAC W mm Rated LED voltage = 115-250 VAC 1 NO 250 1.10 9 E217-16-10B 2CCA703160R0001 938988 0.050 10 1 NO 250 1.10 9 E217-16-10C 2CCA703161R0001 938995 0.050 10 1 NO 250 1.10 9 E217-16-10D 2CCA703162R0001 939008 0.
Ordering data Indicator lights Indicator lights with 1 LED - 5 different colours Contact Rated Power LED config. volt- loss Width Order data Product No. colour Bbn Weight Pack. 7612270 per unit unit Type EAN kg unit age VAC W mm Rated LED voltage = 115-250 VAC - - 0.47 9 E219-B 2CCA703400R0001 939282 0.04 10 - - 0.47 9 E219-C 2CCA703401R0001 939299 0.04 10 - - 0.47 9 E219-D 2CCA703402R0001 939305 0.04 10 - - 0.
Multiple indicator lights and accessories Multiple indicator lights with 2 LEDs Contact Rated Power LED config. volt- loss Width Order data Product No. Bbn colour Weight Pack. 7612270 per unit unit Type EAN kg unit E219-2CD 2CCA703910R0001 413330 0.042 10 E219-2CD48 2CCA703911R0001 413347 0.042 10 Product No. Bbn Weight Pack. age VAC W mm Rated LED voltage = 115-250 VAC - - 0.8 9 Rated LED voltage = 12-48 VAC - - 0.
Technical data On-off switches General Overall depth Width Colour Climatic resistance to Ambient temperature Storage temperature Connection cross-section (Cu) Tightening torque Contacts 68 mm 0.5 or 1 module (9 or 18 mm) grey, RAL 7035 IEC 60068-2-2 (dry heat) IEC 60068-2-30 (humid heat) IEC 60068-2-1 (low temperatures) - 25°C to + 55°C - 40°C to + 70°C from 1 x 1 mm2 to 1 x 6 mm2 or 2 x 2.5 mm2 solid; from 1x 0.75 mm2 to 2 x 1.
Change over, Group and control switches, pushbuttons and indicator lights Change over, Group and Control switches (E213; E214; E218) Rated current In 16 A, 25 A Rated voltage Un in accordance with EN 250 VAC, 400 VAC in accordance UL 508 240 VAC Lowest operating voltage 24 VAC; 25 mA Frequency 50/60 Hz Switches sealable in the On and Off positions Standards DIN EN 60669-1 *VDE 0632-1 UL 508 Approvals VDE; UL; GOST; CCC Pushbuttons without and with LED (E215; E217) Rated current In 16 A Rated voltage Un
Technical data On-off switches 16 A and 25 A On-off switches 16 A DC switching capacity E211 16 A U/V 500 400 300 220 100 70 60 50 40 Ohmic load Normally-open contact Normally-closed contact 30 20 10 1 On-off switches 25 A 2 3 4 5 6 7 10 15 16 18 I /A Load with time constant t = 15ms (inductive load) Normally-open contact Normally-closed contact DC switching capacity E211 25 A U/V 500 400 300 220 100 70 60 50 40 Ohmic load Normally-open contact Normally-closed contact 30 20 10 1 5/3
On-off switches 32 A On-off switches 32 A DC switching capacity E211 32 A U/V 500 400 300 200 100 70 60 50 40 Ohmic load Normally-open contact Normally-closed contact 30 20 10 1 2 3 4 5 6 7 10 16 20 30 40 32 I /A Load with time constant t = 15ms (inductive load) Normally-open contact Normally-closed contact Technical catalogue | Technical data 5/4
Technical data Pushbuttons and indicator lights Pushbuttons and indicator lights Overview of general meanings of the colours of operator control parts (excerpt from VDE 0199 or DIN EN 60073).
Technical catalogue | Technical data 5/6
Dimensions (in mm) Switches Switches 16 A, 25 A and 32 A Switch, 1+2-pole Switch, 3+4-pole 5/0 Dimensions | Technical catalogue
Pushbuttons and indicator lights Pushbuttons Indicator lights Technischer Katalog | Dimensions 5/1
Approval and standards Switches, pushbuttons, indicator lights Germany Denmark Norway Russia Switzer- USA Poland China Shipping classification land VDE Switches E211 Cange over switches E213 Group switches E214 Control switches E218 Pushbuttons E215 DEMKO Luminous pushbuttons E217 Indicator lights (1 LED) E219 Indicator lights (2 & 3 LEDs) E219 devices are approved in preparation not required 6/1 Approval and standards | Technical catalogue NEMKO GOST ESTI companies cURus BBJ C
Contact Ireland Asea Brown Boveri Ltd. Belgrad Road, Tallaght Dublin 24 Ireland Telephone +35 31 40 57 30 0 Telefax +35 31 40 57 33 2 www.abb.be www.abb.com/lowvoltage Brasil ABB Ltda Av. dos Autonomistas, 1496 06020-902-Osasco-SP Brasil Telephone +55 (0) 80 00 14 91 11 Telefax +55 (11) 36 88 99 77 Italy ABB SACE S.p.A. Line Protection Devices Viale dell‘Industria, 18 20010 Vittuone (MI) Italy Telephone +39 02 90 34 1 Telefax +39 02 90 34 76 09 www.abb.com.br Czech Republic ABB s.r.o.
