Hardware manual

Starting up fieldbus communication and programming the ABB PLC
115
6. The project contains a scaling function for the ABB Drives profile. The speed
scaling function enables entering a reference speed in rpm. To activate speed
scaling, toggle button: Activate speed scaling. Insert desired reference speed to
Ref 1 (rpm) field and press enter. The drive ramps up to the reference speed.
You can monitor the actual speed in the Act 1 (rpm) field and also from
speedometer below the field.
You can monitor the actual cyclic data flow over fieldbus in PZD 2-10 areas.
Tool/Step
Running and testing the program