Datasheet

ManualsBrandsABB ManualsCircuit BreakersMiniature Circuit Breaker C, 20A, 250V, IP20/IP40

US Catalog | Miniature Circuit Breakers 39

Technical specifications

S200 S200P S200MR S200MUC

Number of poles 1, 2, 3, 4 1, 2, 3, 4 1, 2, 3, 4 1, 2, 3, 4

Trip curves B, C, D, K, Z B, C, D, K, Z K C, K, Z

Rated current 0.5-63 A 0.2-63 A 0.2-63 A 0.2-63 A

Rated voltage 277/Y480 VAC 277/Y480 VAC 277/Y480 VAC 277/Y480 VAC

60/110 VDC (1/2-pole) 250/500 VDC (1/2-pole)

Short circuit interrupt rating 6 kA 10 kA (up to 25 A) 10 kA 10 kA (DC)

6 kA (32-63 A) 6 kA (AC)

Calibration temperature 25

C 25

Protection degree IP 20 IP 20 IP 20 IP 20

Mounting position Any Any Any Any

Mounting/installation 35 mm DIN rail 35 mm DIN rail 35 mm DIN rail 35 mm DIN rail

Terminal/cable size AWG 18-4 AWG 18-4 AWG 18-4 AWG 18-4

Service life, mechanical 20,000 operations 20,000 operations 20,000 operations 20,000 operations

Ambient temperature -25

C to +55

C -25

C to +55

C -25

C to +55

C -25

C to +55

Shock resistance (IEC 60068-2-27) 25 g - 2 shocks - 13 ms 25 g - 2 shocks - 13 ms 25 g - 2 shocks - 13 ms 25 g - 2 shocks - 13 ms

Auxiliary contact S2C-H6R and signal contact S2C-S6R

Rated current 10

Rated voltage AC/DC 24

Contact 1 pole, single throw

Connection capacity mm

18-14 AWG (0.75...2.5)

Tightening torque 11 in. lbs (1.2 Nm)

Shock resistance acc. to DIN IEC 68-2-6 5 g, 20 frequency cycles 5...150...5 Hz at 24 VAC/DC, 5 mA auto-reclosing < 10 ms

Mechanical service life 10,000 operations

Shunt trip

S2C-A1 S2C-A2

Rated voltage AC 12...60 V 110...415 V

DC 12...60 V 110...250 V

Maximum release duration <10 ms <10 ms

Minimum release voltage AC 7 V 55 V

DC 10 V 80 V

Consumption on release AC 40...200 VA 55...210 VA

DC 40...200 VA 55...110 VA

Coil resistance

3.7 V 225 V

Terminals 18...6/0.75-16 AWG/mm

18...6/0.75-16 AWG/mm

Tightening torque 18/2 in. lbs/Nm 18/2 in. lbs/Nm

Undervoltage release

S2C-UA S2C-UA S2C-UA S2C-UA S2C-UA S2C-UA S2C-UA S2C-UA S2C-UA S2C-UA

12 DC 24 AC 24 DC 48 AC 48 DC 110 AC 110 DC 230 AC 230 DC 400 AC

Standards

IEC/EN 60947-1110...415 V

Rated voltage AC 24 V 48 V 110 V 230 AC 400 V

DC 12 V 24 V 48 V 110 V 230 V

Frequency 50 ... 60 HZ

Release trip 0.35 UnOVO 0.7 Un V

Terminals 2 x 16/2 x 1.5 AWG/mm

Consumption 0.2 VA 3.6 VA 2 VA 3.6 VA 2.1 VA 3.5 VA 2.2 VA 3.7 VA 2.3 VA 2.4 VA

Resistance to corrosion constant atmosphere: 23/83 – 40/93 – 55/20; variable atmosphere: 25/95 – 40/93

C/RH

Protection degree IPXXB / IP2X

Tightening torque 3.5/0.4 in. Ibs/Nm

Technical specifications

S200, S200P, S200MR, S200MUC—UL 1077, CSA 22.2 No. 235