Installation guide

Appendix B - Obtain network, device, and network variable information
LonWorks 21
14.
Type
O
15.
(the letter, not zero).
Type a name for the file that NodeUtil will create with the LonWorks device's network
variable information.
EXAMPLE:
16.
vav_controller.log
Press Enter to create the file.
17. Push, then quickly release the service pin on the LonWorks device you want to get
information from. The device number is displayed in the window.
CAUTION
Holding the service pin for 3 seconds or longer can delete memory from some
third-party devices.
TIP
18.
For some VAV devices, the connected sensor's override button may also function as
a service pin.
Type
G
19.
to go to the device menu.
Type the device number, then press Enter.
20.
Type D
21.
, then press Enter for [all] domain tables.
Type X
22.
, then wait for NodeUtil to request a file name.
Type a name for the .xif file that NodeUtil will create containing the device and network
information. Omit the file extension; NodeUtil will automatically add the .xif extension.
NOTE
23.
If you do not specify a path, the file will be saved in the same folder as the
NodeUtil.exe file.
Press Enter to create the .xif file.
24.
Type E
25.
to exit the device menu.
Close the Command Prompt window.
Option 2: Using an SLTA-10 Network Adapter
Your computer must have a serial port to use this option.
NOTE Echelon
®
software is incompatible with some USB to serial port adapters. If your computer does not
have a serial port, use a different option to connect your computer to the LonWorks network.
To obtain and install Echelon software:
1. Go to www.echelon.com/support/downloads.
2. Log in or create a new login account.
3. In
Search for software in
, select
Network Interfaces
, click
Find
•
, then download
Open LDV
(latest version)
•
Network Drivers for Windows 2000/XP/2003
LonWorks SLTA-10 Serial LonTalk(R) Adapter Software for Windows 98/2000/XP