Installation guide

Before-you-begin checklist
2 LonWorks
Assumptions
 You know how to create custom equipment in ApplicationBuilder.
 You know how to install, wire, set up, and download memory to the i-Vu Link.
 The LonWorks network/devices have been commissioned by the third-party representative
using LonMaker.
Items to be installed at the job site
Item

Notes
i-Vu Link
 LonWorks module driver drv_ivulink_lon latest version>.driver.

Echelon
®
SLTA-10 Serial LonTalk
®
• #73351 for FT-10 networks
Adapter
• #73352 for TP-78 networks
• #73353 for TP-1250 networks
• #73354 for RS-485 networks
You need 1 adapter for each i-Vu Link that is
connected to a LonWorks network segment. Make
sure you order the model that matches your
network topology. See the Echelon website
http://www.echelon.com ( ) for your local Echelon
sales contact.

Echelon
®
power supply (part# 78010)
CAUTION!

You can damage the SLTA-10 if it does not have its
own isolated power supply.
EIA-232/RS-232 straight-through cable
with 9-pin connectors
and an S2-DB9 adapter (purchase S2-
DB9 from Carrier)
or
18-22 AWG, 4-conductor cable and a
DB9 male adapter
To connect the i-Vu Link to its SLTA-10. You can
buy an EIA-232/RS-232 cable with connectors or
buy 4-conductor cable and wire your own
connections.
 Custom equipment files and graphics
Before-you-begin checklist