User's Guide

DIGITAL DRY TRANSFOR MER
2019-03-19 45/57
2
Parm
3
Event
4
Trends
Alarm State
0
Low_Low
1
Low
2
In_Range
3
High
4
High-High
5
Fault
For example, the following message contains data for the “gps_latitude”, ‘gps_longitude’, and ‘gps_time’
parameters.
[{alarmState":2,"dataType":3, "name":"gps_latitude","tagType":0,"value":"NOFIX"},{"name":"gps_longitu
de","tagType":0,"value":"NOFIX"},{"name":"gps_time","tagType":0,"value":0}]
11.1.4 Stopping a Pushed Message
1. To delete a message, select a name from the Message Name dropdown menu.
2. Click the Delete Message button. Note: the data file on the subscriber client does not get deleted.
11.2 Push Communication Client Software
The ABB TXpert Push Communication Client is a Windows-based software tool that allow you to store pa-
rameters and events output from TXpert on a personal computer. The software uses the secure MQTT
protocol to communicate with the TXpert and stores the data in both Comma Separated Value (CSV) and
JavaScript Object Notation (JSON) formats.
The ABB TXpert Push Communication Client begins record-
ing TXpert data the moment it is launched and correctly configured. The system will keep recording data
until the application is closed by the user.
You should use a laptop or tablet with these minimum specifications:
Operating System:
Windows 7 or greater (64-bit)
Figure 37