User's Guide

DIGITAL DRY TRANSFORMER
2019-03-19 54/57
What about connecting the outputs?
What are the plans for setting the fan current? Will the installers be equipped with an external power
supply to exercise the fans and grab the reading? Will it occur after energization?
Power Up TXpert without Energization
If the customer purchased an external power supply, the TXpert can be activated prior to the
energization of the unit (if desired). Remove the ground cable from the 24DC input and plug
the external power supply into the TXpert Main Module, then plug it into an outlet. There
will be small "beep" when it is powered on. Wait approximately 60 seconds and then follow
the WIFI connection instructions in section xyz. When finished, unplug the external power
supply from the outlet first, and then from the TXpert Main Module. Reinstall the ground
plug into the 24DC input.
What about installing the stickers?