Datasheet

90 – Fastening Solutions I ABB
Mounting bases
4-way entry - high performance
Characteristics
- Design & materials, for increased performance
- Low prole shape (height: 5.1 mm), to save space and reduce the torque forces on the mounting
base
- Ramped cable tie entries, for easier insertion of the cable tie
- Longer struts (up to the edges of the base), for better adhesion
- Special adhesive formulation (specically for Nylon mounting bases) for high pull-off strength
- 2 kinds of self-adhesive material:
- rubber-based, for immediate adhesion (15 minutes set-up time)
- acrylic based, to have the possibility of repositioning the mounting base initially
(set-up time: 24 to 72 hours)
- Two holes to have the possibility to use additional screws, for even stronger installations when
required
- Supplied on two-up lining, for easy removal of the lining
Technical Information
Material - Moulding Polyamide or UV-resistant Polyamide
Material - Self-adhesive Rubber based or acrylic based (See table)
Temperature range -60°C to +85°C
(Self-adhesive version: 0°C to +70°C)
Flammability rating UL 94 V-2
Colours Natural or UV-resistant black (see table)
Other properties UV-resistant black, Halogen free, Silicone free
Product Colour Mounting Dimensions For tie Moun- Quantity
Ref. method L W H width
up to
ting hole
diameter
[mm] [mm] [mm] [mm] [mm] [pieces]
TC345 natural glue* / screws 28.6 28.6 5.1 5.2 4.0
1000
TC345A natural
self-adhesive (rubber based) / screws 28.6 28.6 5.1 5.2 4.0
1000
TC5345A natural
self-adhesive (rubber based) / screws 28.6 28.6 5.1 5.2 4.0
100
TC345AX UV-resistant black
self-adhesive (rubber based) / screws 28.6 28.6 5.1 5.2 4.0
1000
TC5345AX UV-resistant black
self-adhesive (rubber based) / screws 28.6 28.6 5.1 5.2 4.0
100
* Glue = Product Ref. TC2PA (see page 147 for specications)
E49405