Datasheet
ABB I Fastening Solutions – 7
Extensive range of approvals and certications:
Germanischer Lloyd, Lloyd’s Register of Shipping,
VG, Mil Specication, Amercian Bureau of Shipping
(ABS); CE declaration, compliant to the low voltage
directive and EN/IEC 62275 and UL 62275
Wide Range of Size Combinations:
several lengths up to 1143 mm, in 6 typical widths
with a tensile strength up to 780N, to fasten cable
bundles with a diameter up to 330mm.
Dedicated Tooling,
to ensure that the excess end of the Ty-Rap
®
tie
is automatically cut off and the slight over cut
retracts into the head, eliminating the risk of
injury from protruding sharp edges.
Most Extensive Choice of Special Materials:
in addition to Polyamide 6.6 (standard,
UV-resistant, heat stabilised, ame retardant,
heat stabilised / UV-resistant), Polyamide 4.6
(extra high temperature) and Polyamide 12,
the Ty-Rap
®
ties are available in Polypropylene,
Fluoropolymer (ECTFE), Fluoropolymer (ETFE) and
the recently introduced Detectable Polyamide 6.6
and Detectable Polypropylene. UL 94 V-0, UL 94
V-2 and UL 94 HB.
Angled Tail (turned up)
for fast and easy insertion into
the locking head
and ideally suited to being
picked up from a at work area.
Wide Choice of Colours:
10 standard colours are available
and pre-printed customized ties in
any of the standard colours can be
supplied on demand.
Different Types of Packaging,
including the unique “workbench
boxes” for fast working without
problems or losses.
Recyclable packaging for a better
contribution to the environment.
Outstanding Range of Special Ties,
all with the famous stainless steel
locking device:
ties with mounting hole or integrated
peg/nail, panel mounting ties,
identication ties with integrated
label,...
Broad Range of Mounting Bases and
Accessories.
Non-Slip Tail, for an easy grip
and pulling through the head during tensioning.
UV-resistant Flame
retardant
Heat
resistant
Weather-
proof
Low
temperature
exibility
Radiation
resistant
Chemically
resistant
Low smoke Detectable
TYPE
APPROVED
E49405