User's Manual

Settings
11.3.5 Power management
Display the battery capacity.
11.3.6 Restore factory settings
Reset all parameter values into default status.
Please enter the privacy preserving password
(Initial password is 1234) to resume factory setting.
11.4 Display settings
11.4.1 Wallpaper settings
Select the default or other pictures as the wallpaper
of the phone.
11.4.2 Idle screen style
”Standard style” and “Smart style” are available.
11.4.3 Contrast
Press 【Left /Right Key】to adjust the contrast.
11.4.4 Backlight
Select the desired backlight time.
11.4.5 Keypad backlight time
Select the desired keypad light time.
11.4.6 Animation effect
You can select the preset animation or others as
the power on/off animation for your phone.
11.5 Security settings
In order to secure the information, you can set PIN
code, PIN2 code and power-on password.
11.5.1 PIN
PIN code is the personal identification number for
SIM card. If never be modified, the initial password
set by network operator should be 1234 or 0000. If
activated the power-on PIN code, then you have to
input the PIN password each time you switch the
phone on. You can modify the PIN code to prevent
your SIM card being used by others.
Select the desired SIM type and have the following
options:
 Activated: You should input PIN code each
time switching the phone on.
 Modify: You should activate PIN code before
modifying it.
 Off: You should input the correct PIN code
before deactivating it.