User guide

4.4 Setting Fixed Input Level for Bypass Mode

When using the AM-777 as part of a home theatre system with an external processor controlling the overall system

volume, it is possible to program one of the five input sources to have a fixed level of input such as for a home

theatre system of either 0.775V (0dbu) or 1.55V (+6dBu). This allows the 2-Channel music system to be seamless-

ly integrated into a high-performance multi-channel home cinema system.

- Go to Section 4.1 and follow the instructions to select the last label:

Home Theatre

Direct

• Simultaneously press ‘+’ volume (F3) on the front panel of the AM-777 and ‘OK’ (RC7) on the RCD-77

• Press the Volume+ button untill the display reads +12dB, press Volume+ again

• Press the OK button to enter the (Volume Control) Bypass mode

• Confirm the warning message by pressing Volume+ or press OK to exit without enabling Bypass mode

• Then select one of the following settings using Volume+/Volume - :

HTD mode: always

use an external

pre-amp as this

mode will switch

the AM-77 to full

volume!