Reference Class Manual

Section 4 - Transport/DAC

The CD-77 may also function as a dedicated transport or DAC. Rest assured that with AMR’s proprietary jitterless

technology, either as a transport or a DAC, using either USB or S/P-DIF connections, the music signal remains

jitterless.

Before selecting betweem Transport/Integrated/DAC modes, always ensure the CD section is not in use such as

reading the Table of Contents or playing a disc.

4.1 DAC Input (RC-77 only)

The DAC button (RC4) is for the replay of music on the CD-77 from music stored on a computer hard-drive via an

S/P-DIF or USB cable connection.

To establish the connection between the CD-77 and the hard disk source:

i. Power on the CD-77.

ii. On the RC-77 press the DAC button (RC4) to place the CD-77 in DAC mode.

iii. Power ON the personal computer.

iv. Connect the S/P-DIF input or USB cable between the CD-77 and the personal computer.

v. Go to Control Panel > System > Hardware > Device Manager. In Device Manager wait until

the personal computer in Hardware has recognised the CD-77 as a USB Audio Device.

This is located under the Sound, video and game controllers category.

Built-in jitterless

technology