Instruction Manual

4.5 Default Filter Selection

The HD and Classic DACs each have their own set of filters. In addition to pressing the Filter button (RD9) to

make a Filter selection, it is also possible for the user to set a new default filter. This is done by holding down the

Filter button for 2-3 seconds. The display will flash “Set as Default” to acknowledge the new default filter.

4.6 AMR Optimal Auto-Select

At a press of the AMR button (RD7), the DP-777 will intelligently select the most optimal setup for playback of

the current source material.

With a 44.1/48kHz source (e.g. CD transport, files ripped from CDs), the following setup will be automatically

selected for optimal playback:

DAC: Classic DAC

Zero Jitter Mode: Enabled

Filter: Bit-Perfect II

Upsampling: Disabled

With an 88.2/96/176.4/192kHz source (e.g. HD files), the following setup will be automatically selected for opti-

mal playback:

DAC: HD DAC

Zero Jitter Mode: Enabled

Filter: Organic

Upsampling: Disabled

The “AMR” button will

intelligently select the

optimal setup