Use Manual
Table Of Contents
- Table of contents
- Read me first
- Section 1: Use or function
- Section 2: Installation procedures and special requirements
- Section 3: Principles of operation
- Section 4: Performance characteristics and specifications
- Section 5: Operating instructions
- Section 6: Operational precautions and limitations
- Section 7: Hazards
- Section 8: Service, maintenance, and diagnostics
- Section 9: Troubleshooting
- Appendix A: Alinity ci-series SAL
- Design and function
- Technical data
- Sample Access Line operation
- Buttons
- Start screen
- Power on the Sample Access Line
- Place the Sample Access Line online
- Place the Sample Access Line offline
- Pause the Sample Access Line
- Deactivate pause mode
- Restart the Sample Access Line
- Main menu screen element descriptions
- Login screen
- Access the Login screen
- Information screen element descriptions
- Access the Information screen
- Access the Configuration screen
- Error message screen
- Acknowledge an error message
- Acknowledge a message
- Weekly cleaning procedure
- Error messages
- Communication and software update error messages (0-10000)
- Module component error messages (20000-29999)
- Message code: 20105
- Message code: 20200
- Message code: 20201
- Message code: 20202
- Message code: 20203
- Message code: 20204
- Message code: 20205
- Message code: 20206
- Message code: 20207
- Message code: 20209
- Message code: 20210
- Message code: 20211
- Message code: 20901
- Message code: 20902
- Message code: 20910
- Message code: 20911
- Message code: 20912
- Archive error messages (21300-21468)
- Message code: 22501
- Message code: 22502
- Message code: 22550
- Message code: 22600
- Message code: 22601
- Message code: 22602
- Message code: 22603
- Message code: 22604
- Message code: 22605
- Message code: 22606
- Message code: 22607
- Message code: 22608
- Display error messages (23000-23017)
- Message code: 27000
- Error message on the touchscreen user interface
- CAR with sample at AccessPoint, in traffic jam, or in long queue; sample matter has been removed
- Revision history
- Index
General safety information
Before operating the Sample Access Line (SAL), you should read and understand the safety
information in this manual.
For information about actions or conditions that can affect system performance, carefully
review Operational precautions and limitations, page 23.
To become familiar with safety icons on the instrument and in this manual that indicate
potentially hazardous situations, review Hazards, page 25. Comply with the hazard and safety
information to minimize the potential for harm to personnel and damage to the laboratory
environment.
These two sections of the manual contain supplemental information. Do not use the
supplemental information to supersede workplace safety requirements. Review any significant
differences between the supplemental information and the workplace safety requirements with
management or a workplace safety representative.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This device complies with Industry Canada license-exempt RSS standards. Operation is subject
to the following two conditions: (1) This device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the
device.
For customers in the European Union: If, in the course of using this device, you have reason to
believe that a serious incident has occurred, please report it to the manufacturer and to your
national authority.
The SAL is state-of-the-art. However, residual dangers exist. The safety instructions must be
read and observed. The manufacturer accepts no liability for failure to observe the safety
instructions.
See the GLP systems Track Operations Manual for the complete listing of all safety information.
Related information...
Read me first, page 5
General safety information
Read me first
6 Sample Access Line (SAL) Interface Manual
80003970-101 DRAFT - 2022-MM-DD