Use Manual
Table Of Contents
- Table of contents
- Read me first
- Section 1: Use or function
- Section 2: Installation procedures and special requirements
- Section 3: Principles of operation
- Section 4: Performance characteristics and specifications
- Section 5: Operating instructions
- Section 6: Operational precautions and limitations
- Section 7: Hazards
- Section 8: Service, maintenance, and diagnostics
- Section 9: Troubleshooting
- Appendix A: Alinity ci-series SAL
- Design and function
- Technical data
- Sample Access Line operation
- Buttons
- Start screen
- Power on the Sample Access Line
- Place the Sample Access Line online
- Place the Sample Access Line offline
- Pause the Sample Access Line
- Deactivate pause mode
- Restart the Sample Access Line
- Main menu screen element descriptions
- Login screen
- Access the Login screen
- Information screen element descriptions
- Access the Information screen
- Access the Configuration screen
- Error message screen
- Acknowledge an error message
- Acknowledge a message
- Weekly cleaning procedure
- Error messages
- Communication and software update error messages (0-10000)
- Module component error messages (20000-29999)
- Message code: 20105
- Message code: 20200
- Message code: 20201
- Message code: 20202
- Message code: 20203
- Message code: 20204
- Message code: 20205
- Message code: 20206
- Message code: 20207
- Message code: 20209
- Message code: 20210
- Message code: 20211
- Message code: 20901
- Message code: 20902
- Message code: 20910
- Message code: 20911
- Message code: 20912
- Archive error messages (21300-21468)
- Message code: 22501
- Message code: 22502
- Message code: 22550
- Message code: 22600
- Message code: 22601
- Message code: 22602
- Message code: 22603
- Message code: 22604
- Message code: 22605
- Message code: 22606
- Message code: 22607
- Message code: 22608
- Display error messages (23000-23017)
- Message code: 27000
- Error message on the touchscreen user interface
- CAR with sample at AccessPoint, in traffic jam, or in long queue; sample matter has been removed
- Revision history
- Index
Related information...
Archive error messages (21300-21468), page 68
Message code: 21375
RFID Runtime Error
Probable cause Corrective action
An error has occurred. 1. Correct the error by following the instructions on
the touchscreen user interface.
2. If the error cannot be corrected, contact an Abbott
Laboratories representative or an authorized
service representative.
Related information...
Archive error messages (21300-21468), page 68
Message code: 22501
Communication error $0 between $1 and $2
Probable cause Corrective action
An error has occurred. 1. Correct the error by following the instructions on
the touchscreen user interface.
2. If the error cannot be corrected, contact an Abbott
Laboratories representative or an authorized
service representative.
Related information...
Module component error messages (20000-29999), page 62
Message code: 22502
Parameter redundancy of access point $0 must be at least $1.
Probable cause Corrective action
An error has occurred. 1. Correct the error by following the instructions on
the touchscreen user interface.
2. If the error cannot be corrected, contact an Abbott
Laboratories representative or an authorized
service representative.
Related information...
Module component error messages (20000-29999), page 62
Message code: 22550
Device specific error #$0 occurred.
Alinity ci-series SAL
Error messages
Appendix A
70 Sample Access Line (SAL) Interface Manual
80003970-101 DRAFT - 2022-MM-DD