Use Manual

– The bar code 0999.0999-9 can be entered as 0999.09999 if the exact bar code is
known.
– The bar code 0999.0999-9 can be entered as 0999.0999* if the last digit of the bar
code is unknown or if there are multiple samples on the track that end with this bar
code. All samples that have a bar code beginning with 0999.0999 are listed.
4.
Tap Search or press the Enter key to display a list of search results.
5. If multiple samples are displayed for one bar code, select the sample based on its status.
NOTE: The following actions can cause multiple samples to be displayed for one bar code:
– A bar code containing an asterisk was entered.
– Tubes have been repeatedly removed from and placed back on the GLP systems
Track.
– Additional secondary tubes with an identical bar code have been generated on the
Aliquot Module.
6. Tap the sample to be removed.
7.
On the Sample Detail screen, tap Remove.
8.
When a confirmation message is displayed, tap OK.
In the Error text box on the Sample Detail screen, the sample is marked as removed.
Related information...
Samples tab (TSM), page 121
Expert search tab (Samples) element descriptions (TSM), page 129
Replace a CAR with a sample, page 301
Expert search tab (Samples) element descriptions (TSM)
The Expert search tab is used to enter detailed filter options when searching for samples.
Search area
Displays the search criteria for the sample.
Barcode Displays a text box that is used to search by the bar code.
Sample no Displays a text box that is used to search by the sample
number.
Entry from Displays a text box that is used to search for a sample on the
track by the search start date.
Entry to Displays a text box that is used to search for a sample on the
track by the search end date.
Section 5
Operating instructions
Track Sample Manager user interface
GLP systems Track Operations Manual
80003968-101 - 2021-09-16
129