Use Manual

Related information...
Test status screen (TWM), page 155
Enable the tests by type of analysis on the Test status screen (TWM)
Perform this procedure to enable the tests by type of analysis on the Test status screen of the
Track Workflow Manager (TWM). Individual tests of an analyzer or module can be enabled so
that they can be used as route targets.
1.
On the TWM main menu, tap Run.
2.
On the menu overview, tap Test status.
3.
On the Test status overview, tap By type of analysis to display the Test status screen by
type of analysis.
4.
On the analysis view of the Test status screen, tap the type of analysis in the Type of
analysis drop-down list.
NOTE: When the type of analysis is selected, all analyses of the corresponding type and
their associated instruments are displayed. To search for individual analyses, use the Filter
text box if they have been assigned a type of analysis.
5.
Tap the white check box in the TWM status column and in the rows of the tests to be
enabled.
6.
Tap Save.
The tests are now enabled.
Related information...
Test status screen (TWM), page 155
Connections screen (TWM)
On the Connections screen, the operator can view the incoming and outgoing connections to the
Track Workflow Manager.
Related information...
Track Workflow Manager user interface, page 139
Connections screen element descriptions (TWM), page 159
View the connections to TWM, page 160
Menu overview screen element descriptions (TWM), page 140
Connections screen element descriptions (TWM)
The Connections screen displays connection information.
Section 5
Operating instructions
Track Workflow Manager user interface
GLP systems Track Operations Manual
80003968-101 - 2021-09-16
159