Use Manual

Preanalytical modules
Buffer Module (BM) The BM is used as intermediate
storage to optimize the workflow and to
reduce the traffic on the GLP systems
Track.
Centrifuge Module
(CM)
The CM allows samples to be
centrifuged automatically. The module
is equipped with a high-performance
centrifuge, which includes an integrated
cooling unit.
Decapper Module
(DM)
The DM removes safety caps and
screw caps from tubes before
processing or analysis. The DM does
not remove conical recaps.
Aliquot Module (AM) The AM distributes the sample matter
of a primary sample tube to secondary
tubes. During the aliquoting processes,
secondary tubes are assigned and
provided with a customer-specific bar
code. This bar code is verified before
the tubes leave the module.
ScrewCapper Module
(SCCM)
The SCCM tightly closes secondary
screw-cap tubes used by the AM with
screw caps to ensure safe shipment of
samples or freezing of samples at a
temperature of down to -80°C.
Remover Module
(REM)
The REM removes recaps from sample
tubes. Recaps are conical, plastic caps
that are used to seal sample tubes
before they are stored.
Postanalytical
modules
Archive II The Archive II is used for temporary
storage of specimens. The Archive II
has a Loader Module and one or two
cooling units for storage. The Loader
Module automatically loads tubes into
storage after analysis, retrieves tubes
from storage if additional tests are
requested, and disposes of tubes
according to the tube type and
customer-defined retention time.
Use or function
GLP systems Track overview
Section 1
34
GLP systems Track Operations Manual
80003968-101 - 2021-09-16