Use Manual

the Reset fill level button is selected) or the module to be
emptied.
NOTE: A module can be disabled only when the queue does
not contain CARs or when no CARs are being routed to the
module and fewer than two switches are located in front of
the module. If these situations are not applicable, the module
status must be changed before the module is disabled on the
TSM.
Enable Enables the selected module on TSM.
Update Refreshes the module controller data on the screen.
Close Closes the screen and returns to the controller overview.
Related information...
Track / RE tab (TSM), page 101
Circles tab element descriptions (TSM)
The Circles tab displays an overview of all generated track circles. Defining the circles is
recommended to ensure optimum traffic control on large-scale track systems. A schematic of all
circles is displayed on the Layout tab.
Elements
Fill level control Displays the fill level control for the circle:
•
All CARs
• Empty CARs
• No CARs (disabled)
Name Displays the circle name. The Track Sample Manager sets a
default name that the administrator can change.
Relevant switches Displays the node IDs of all switches whose default positions
define the circle boundaries.
Modules in circle Displays the module IDs of the modules in the circle.
Status Displays the status of the circle:
Green CARs can enter the circle.
Section 5
Operating instructions
Track Sample Manager user interface
GLP systems Track Operations Manual
80003968-101 DRAFT - 2022-03-11
111
DRAFT 2022-03-11