Use Manual

Input/Output Module operation
The module-specific function selection for the Input/Output Module is displayed on the main
menu. The operator selects the corresponding function and follows the instructions. Ensure that
the module covers are closed and locked before operating the module.
CAUTION: Damage from sharp and hard objects. Sharp and hard objects can damage
the surface of the monitor.
Related information...
Operating instructions, page 87
Open and close the front and rear module covers, page
160
Power on the module, page 163
Power off the module, page 164
Place the module online, page 165
Place the module offline, page 165
Pause the module, page 166
Deactivate pause mode, page 166
Main menu screen (IOM), page 167
Load samples into FlexRacks, page 169
Unload samples from FlexRacks, page 171
Open and close the front and rear module covers
Required module
status
Offline
Perform this procedure to open and close the front and rear module covers.
CAUTION: Overhead obstruction. Operators may hit their heads on open module
covers.
•
Be aware that injury or bodily harm can occur when module covers are opened and
closed.
• Protect the head when working on modules with open module covers.
• Frequently observe the functionality of the opening mechanism. Regular visual
inspection of the covers is necessary during maintenance to ensure proper
operation.
1. At the lower end of the front or rear module cover, insert the unlock key [1] into the unlock
mechanism [2].
NOTE: Images of the rear module cover are not shown.
Operating instructions
Input/Output Module operation Section 5
160 GLP systems Track Operations Manual
80003968-101 DRAFT - 2022-03-11
DRAFT 2022-03-11