User's Manual

151
152
6.7 Companion Self Test
Purpose
To perform a self test for the Aviator Companion to ensure that the display, audio,
vibrator, backlight, test light, and memory functions are working.
When
Do this procedure:
Before you set up and use your companion and pump for the rst time.
•
When you wish to self test the companion because you are • NOT sure if all the
functions are working properly.
Anytime you see the
• Low Battery Alert screen.
Materials
Your companion operating with all settings programmed.•
Assistance from healthcare professional as needed.•
Procedure:
Steps Do This
Go to the SETUP menu.1.
From the a. Home screen, notice Main is highlighted.
Press b. Enter button.
Scroll to highlight c. SETUP.
Press d. Enter button.
Scroll to highlight e. SELF TEST.
Press f. Enter button.
Steps Do This
Observe Self Test.2. Check the display (the display will highlight).a.
Note: The display automatically advances through the sequence of screens at a rate
of 0.5 seconds per screen.
Confirm audio sounds (you will hear beeps).b.
Confirm vibrator (you will feel short vibes).c.
Confirm backlight (the backlight turns on).d.
Confirm test light (the test light turns on).e.
Check memory.f.
Note: You will automatically return to the SETUP menu, and Home screen if no
other actions are taken.
Section 6: When You’re Ready – Optional Settings
6.8 Pair Companion and Pump
Section 6: When You’re Ready – Optional Settings
6.7 Companion Self Test
DOC15736_Rev-A-Man.indd 151-152 2/9/09 11:29:48 AM