User's Manual

183
184
Steps Do This
Access 2. MODIFY
PROGRAM menu.
Scroll to highlight a. MODIFY.
Press b. Enter button.
Select 3.
DELETE program.
Scroll to highlight a. Delete.
Press b. Enter button.
Select program to 4.
delete.
Scroll to highlight the program you wish to delete. For example, Trip.a.
Note: You CANNOT delete an active program, indicated with an asterisk *.
Press b. Enter button.
Note: If you get this warning screen with OK highlighted, press Enter to clear the
warning and return to the Home screen. Start over at Step 1 to delete a program that
is NOT active.
Steps Do This
Decide what to do 5.
next.
Notice the CONFIRM screen with “Delete program?” message displays.
If you want to Then do this
Delete the
program
Scroll to highlight 1. Yes.
Press 2. Enter button.
Note: The program is deleted from the pump’s memory and you
will return to the Home screen.
Go to Step 6 to check your work.3.
Cancel deleting
the program
Notice 1. No is highlighted.
Press 2. Enter button.
Scroll to Highlight 3. Done.
Press 4. Enter button.
Note: You will return to the Home screen. Your deletion is
cancelled and the program is still an option
Check your work.6. Verify that you have deleted the program.
The program you deleted should NOT be listed when you review basal programs.
Refer to Section 3.1.2 View Basal Program for the procedure as needed.
Section 7: Creating and Editing Specialized Basal Programs to Meet Your Needs
7.6 Set a Temporary Basal Program
Section 7: Creating and Editing Specialized Basal Programs to Meet Your Needs
7.6 Set a Temporary Basal Program
DOC15736_Rev-A-Man.indd 183-184 2/9/09 11:29:50 AM