User's Manual

135
136
Steps Do This
Go to the 5. STATE OF
HEALTH menu.
Scroll to highlight a. STATE OF HEALTH.
Press b. Enter button.
Notice c. State is highlighted.
Press d. Enter button.
Scroll to select state of health (Normal, Cold, Sore Throat, Infection, Tired, e.
Stress, Fever, Flu, Allergy, Period, Dizzy, Alcohol, Low Symptoms, or High
Symptoms).
Press f. Enter button.
Note: You can scroll to highlight Cancel and press Enter to cancel any entries at
anytime.
Scroll to highlight g. Done.
Press h. Enter button to return to the Home screen.
You have completed adding a state of health event.
Steps Do This
Go to the 6. GENERIC
menu.
Scroll to highlight a. GENERIC.
Press b. Enter button.
Note: You can enter up to eight generic events.
Notice c. Event is highlighted.
Press d. Enter button.
Scroll to select event number.e.
Note: The range is 1 to 8. You need to define what the generic events 1 to 8 means
and record in your Table of Settings in Section 12-Appendix A.
Press f. Enter button.
Note: You can scroll to highlight Cancel and press Enter to cancel any entries at
anytime.
Scroll to highlight g. Done.
Press h. Enter button to return to the Home screen.
You have completed adding a generic event.
Check your work.7. Go back to each event menu to see if you have the correct information added.
Section 6: When You’re Ready – Optional Settings
6.5 Review History, Status, and Reports
Section 6: When You’re Ready – Optional Settings
6.5 Review History, Status, and Reports
DOC15736_Rev-A-Man.indd 135-136 2/9/09 11:29:46 AM